Carlton DH14L User manual

Dehumidifier
Model
DH14L

Information and Advice
........................................................................
Safety first!
........................................................................
1. Helps prevent mould on clothing, etc-open cupboards, doors
and drawers before turning the dehumidifier on.
2. Helps prevent condensation on ceilings, walls, glazing-to obtain
best results refrain from opening and closing the windows.
3. Dehumidifying is effective on moisture sensitive items like
computers, etc.
4. Takes away the dampness from bookshelves and closets - open
the door of the closet and put the dehumidifier close to the door
for it to operate effectively.
FUNCTIONS OF THE DEHUMIDIFIER
!
ATTENTION
Before you use your DE-HUMIDIFIER,please read this instruction
manual carefully.
SAFETY NOTES
1. Do not connect unit to any AC electrical socket that is damaged.
2. Ensure removable covers and containers are correctly fitted
before switching on unit.
3. Always switch off at the socket-oulet when not in use and
before unplugging
4. Do not use in the following locations:
Next to source of heat e.g. a radiator heater, tumble dryer
etc.
An area where oil or water is likely to splash.
An area exposed to direct sunlight.
Near a bath, shower or a swimming pool.
In a greenhouse.
5. Never insert your fingers or other foreign objects into grills or
openings. Take special care to warn children of these dangers.
6. Always store the unit upright in order to maintain the compress
in a proper working condition.
Leave the unit upright for at least 24 hours before operating.
7. Always unplug the unit before cleaning.
8. Do not cover the unit.
9. Do not spray insecticides or any other flammable sprays on the
machine.
10. Do not spray water on the dehumidifier.
11. There are no user serviceable parts, should the unit or supply
cord of this appliance become damaged, the unit must be
returned to the manufacturer or service agent.
12. Empty the water tank before moving the dehumidifier.
13. The unit is fitted with an auto defrosting operation and starts
when the evaporator generates frost. This function ensures
continuous running when the temperature is down to 5 .
PLUG REPLACEMENT
This appliance is fitted with a 3-pin plug and rated fuse. In the
event of requiring a replacement ensure that only approved
components are used. If the plug is damaged and requires
replacement, follow the wiring instructions supplied with the new
plug.

Know your dehumidifier
........................................................................
Please read these instructions before using your dehumidifier
........................................................................
NAMES OF PARTS
POWER
WET
COZY
1/O
DRY
MODE
CONT
Control Panel Handle
Wiring Ear
Power Cord
Air Outlet
Air Inlet
Water tank
Castors
CONTROL PANEL
WATER FULL
WATER FULL
Indicator
RUN Indicator
ON/OFF
Button
I/O
RUN
Mechanic Models
I/O Button: By pressing this button, you can switch the unit On or Off .
WATER FULL Indicator: Lights when water tank is full.
POWER Indicator(RUN Indicator): Blinks slowly when the power is connected at the socket.
The POWER indicator lights after the unit is turned On , the light goes off when the unit is turned
Off . When Humidity sensor malfunction occurs, it blinks at 5 times a second.
1
3
2

........................................................................
Using your dehumidifier
........................................................................
Operating Conditions:
Auto Defrost
The unit isfittedwith anAutoDefrost function. If theDehumidifier is
operatingin a cold temperature enviroment (5C or below) the unit
will switchinto defrost mode.
The compressorwill stopandthefanwill continue to operate for8
minutes. After this time the compressor will start again. The unit will continue
this operation until the room temperature has risen above the recommended
operating temperature.
The unit will not perform effectively in cold environments, little or no water
will beextracted from the air.
This unit is designed to operate in a working environment
between 5 and 35 .
If the unit has been switched off and needs to be switched
on again quickly, allow approximately
three minutes for the correct operation to resume.
Do not connect the dehumidifier to a multiple socket outlet,
which is also being used for other electrical appliances.
Select a suitable location, making sure you have easy
access to an electrical outlet.
Plug the unit into a 230-240V~ 50Hz electrical socket-outlet
with earth connection.
Make sure the Water Tank is correctly fitted otherwise
the unit will not operate properly.
The unit will self-check and if it is normal, the POWER indicator
starts flashing. Press the I/O Button, and the POWER indicator
will light.
Press the I/O Button will turn the unit ON or OFF .
OPERATING INSTRUCTIONS
Turning the unit ON or OFF
POWER
POWER
WET
WET
COZY
COZY
1/O
1/O
DRY
DRY
MODE
MODE
CONT
CONT
OPERATION
Water Tank
Water will drain into the tank. When the tank is full and the unit
stops operating, the Water Full indicator light will come on.
Always switch the power off and remove the plug from the socket
before emptying the water tank.
Do not remove the water tank whilst the machine is still
working or just stopped. This might cause water to drip.
To empty the water tank, remove the tank as shown, empty
the water and replace the tank back in the unit. Ensure
components of water tank are correctly positioned.
The machine will re-start when the water tank is restored to
its correct position.

........................................................................
Cleaning
........................................................................
MAINTENANCE
Important:
Be sure to unplug the unit before cleaning.
Do not use petrol, thinners or other chemical
agents to clean the unit as this may cause
damage .
Do not wash the unit directly under a tap or hose.
The electrical components inside may be damaged
and the unit will become unsafe as a result.
Air filter
Clean the air filter at least once every two weeks to
prevent impaired performance of the unit.
Open the air inlet from the notch above as shown
(Figure A), and pull the Air Filter up as shown
(Figure B).
Removal
Cleaning
Wash the air filter with clean water, and then
carefully dry.
Install the cleaned Filter following Figure C, and close
the air inlet.
Replacement
Fig. A Fig. B
Fig. C
Install Air Filter
Open the Air Inlet Grille Pull Out the Air Filter
Filter Frame
(outward)
Net
POWER WET
COZY
1/O
DRY
MODE
CONT
POWER WET
COZY
1/O
DRY
MODE
CONT
POWER WET
COZY
1/O
DRY
MODE
CONT
Unit enclosure
Use a soft, clean cloth to wipe the surface. Do not
use water as this may cause an electrical fault or
shock hazard.
Water tank
Wash the tank using warm water (about 40 ) with
neutral detergent. Rinse and allow to dry. Replace
tank when dry.

........................................................................
Troubleshooting & specifications
........................................................................
TROUBLE SHOOTING
BEFORE CONTACTING THE MANUFACTURER
OR HIS AGENT, PLEASE CHECK THE FOLLOWING
POSSIBILITIES.
Unit fails to
operate
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
Performance
decreased
Unit noisy
1. Power off
2. Power cord unplugged
3. Water tank not fitted correctly
4. Water tank is full
5. Defrosting
1. Blocked air filter
2. Room windows and doors open
3. Obstacles in air outlet or air inlet
1. Unstable setting of unit
2. Blocked filter
Reposition unit
Wash nylon filter
Wash nylon filter
Close room windows and doors
Remove obstacles
Switch power on
Restore power cord
Re-position water tank
Empty water tank
After defrosting, the unit will
dehumidifying again.
5~35 C
230 - 240V~ 50Hz
25% RH and above
4L
20kg
DH14L
14L/d
Model
Dehumidifying capacity
Power supply
Current
Power consumption
Water tank volume
Net weight
Dimension
Working Environment
1.1A
220W
H620 W280 D320mm
TECHNICAL SPECIFICATIONS
Capacity will vary according to actual room
temperature and humidity conditions.