CARVIN ENGINEERING DATA CARVIN ENGINEERING DATA
MACH100
PG. 2
INTRODUCTION
Congratulations on your purchase of the MACH
100 Stereo Guitar Pedal Power Amplifier. The
MACH 100 is designed for the modern guitarist
who wants a compact high output amplifier that
fits right on the pedal board. Use the stereo 2
channel amplifier to drive two guitar cabinets
with 16, 8 or 4 ohm impedance. The LINE IN jack
allows you to insert a backing track into your
performance. Using the PHONES output, you
can monitor the amplifier output using a 3.5mm
stereo cable. The LEVEL control allows the
user to adjust master volume of the amplifier.
The MUTE switch lets you instantly control the
output of the amplifiers with the press of the
switch. Step up to the next level of compact
amplification today.
SILK
446 COATED 2292 COATED
SILK
PANTONE COLOR GUIDE
Ste -
San Diego, CA
PART NO:
MACH ŏljlj
Revision: Date Revised:
Revision By:
Drawn By: Date Drawn:
Joel Kiesel 2019-8-6
24V
MACH 100
POWER AMPLIFIER
PHONES LINE IN
MUTE
WATTS
LEVEL
INPUT
(MONO)
INPUT
(RIGHT)
OUTPUT
(LEFT)
OUTPUT
(RIGHT)
MACH 100 SPECIFICATIONS / FEATURES
»PHONES: 3.5mm stereo output.
Volume is controlled by LEVEL.
»OUTPUT (LEFT): Left amplifier
output. 50W max output, 4Ω
minimum impedance.
»LEVEL: Controls the master volume
of the amplifier.
»MUTE: When engaged, switch mutes
the amplifier left and right outputs.
PHONES is not affected by the MUTE
switch.
»OUTPUT (RIGHT): Right amplifier
output. 50W max output, 4Ω
minimum impedance.
»24VDC: Power supply input 24VDC
5000mA supply.
»LINE IN: 3.5mm stereo input. The
left signal is sent to the LEFT
OUTPUT and the right signal is sent
to the RIGHT OUTPUT. Both left and
right signals are sent to PHONES.
»INPUT (MONO): Sends input
signal to the left and right
amplifier and PHONES output.
»INPUT (Right): Sends input signal
to the right amplifier and
PHONES output.
SPECIFICATIONS:
»Output Power (8Ω): 50W/CH
»Minimum Impedance: 4Ω
»Bridge Mode: No
»Frequency Response: 20Hz - 20kHz (-3dB)
»DC Power Requirements: 24VDC, 5000mA
»Pedal Dimensions: 2.9”(73mm) W x 4.9”(125mm) L x 1.7”(44mm) H
»Pedal Weight: 11.8oz.
»Power Supply Dimensions: 2.7”(70mm) W x 6.6”(168mm) L x 1.6”(41mm) H
»Power Supply Cable Length (supply to pedal): 44” (1117mm)
»Power Supply AC Input: 100-240 50/60Hz
carvinaudio.com MACH100 2019-8-7
WARRANTY
This CARVIN AUDIO product is guaranteed in normal use to be free from electrical and mechanical defects for a
period of one year from date of purchase. Retain proof of purchase. This warranty is in lieu of any and all other
guarantees or warranties, expressed or implied. There shall be no recovery for any consequential or incidental
damages.
