CarVision Uconnect 7 User manual

1
Art. 300 352
Uconnect 7”Camera Video interface manual

2
3、Content:
What's in the Package
No.
Name
Qty
No.
Name
Qty
1
Interface Box
1
5
External Switch
1
2
PCB Board
1
6
Video RCA Cable
1
3
Power cable
1
7
0.5*40*50A ribbon
1
4
LVDS Cable
1
②
③
①
⑤
④
⑥

3
4、Connections:
This daughter PCB will be
installed inside monitor[See
below]

4
5、PCB installation：
1、take the monitor out from the car。
2、remove the screws, then the rear can be
opened.
3、take this PCB out.
4、remove the screws so the metal can be
removed.
5、pay attention to the wire there.
6、take this OEM ribbon out.

5
7、put our ribbon to the OEM socket.
8、connect OEM ribbon to our soket.
9、put the metal back, pay attention that we
have a LVDS cable to our video box.
10、Put the PCB and rear cover back.

6
Image position:
Press MENU button for 2-3 sec. until menu settings appear.
Press MENU button several times to select the option Position-V.
Press UP or DOWN button to adjust the image position.
6. Parameters:
#
Name
Parameters
1
Video input amplitude
0.7Vpp ,75 Ω
2
Sync amplitude
3~5Vpp,5K ,negative pulse
3
Reverse-out:
12V,3A[max]
4
Reverse-IN:
threshold：3V
5
Av1 , cam video amplitude.
0.7Vpp,75 Ω
6
Av1 , cam format
NTSC/PAL/SECAM automatic
7
Power consumption
3.6W [0.3A @12V]
8
Standby current
< 10uA
9
RGB input format
RGB+ HV sync，VGA format，720P resolution
10
Temperature
-40 ~ +85C
11
size
15.22cm * 9cm * 2.1cm