Casa Triton User manual

Secure Triton with the supplied self-drilling
metal screws. Preserve fourth screw for
access panel installation.
7
Replace insulation removed during installation,
while carefully pulling the probe lead through.
6
L2 L1
Using the supplied wire connectors, connect
power line (L1 / L2) to the tinned wires on
Triton.
5
T2 T1
Connect wires with fork terminals to T1 / T2
screw terminals on mechanical thermostat.
4
Remove factory-installed jump wires from
thermostat to power line.
3
Remove top access panel and discard.
The Triton controller will replace this panel.
Remove and keep the insulation blanket.
2
Heating elements continuity should
be tested prior to installation
to ensure proper operation.
Switch power OFF
before proceeding
DANGER !
Electrical shock may result in serious injury or death.
1
*Exclusively for water heaters
Page 1Visit CaSA website at https://casa.energyTriton Installation Manual
Installation of line-voltage equipment
should be performed by a qualified
electrician and be done in compliance
of local code.
WARNING
Disconnect power
before servicing
Risk of electrical
shock
!
Installation Manual

Page 2Visit CaSA website at https://casa.energyTriton Installation Manual
Visit
https://client.casa.energy
The installation is complete!
Secure the access panel section of Triton
with the supplied metal self-drilling screw
ensuring the access bay is completely covered.
11
Connect the probe lead cable (RJ12) to the
Triton, using the supplied rubber cable seal.
Readings will show in 10-30 seconds.
10
Fail
Success
Wait
Please refer to Tips &
Troubleshooting for more.
2. This screen shows Wi-Fi connection successful, server
connection successful and update successful.
This can take up to 10 minutes
and reboot is normal.
1. After initial configuration, do not touch or interact with device.
Wait for Wi-Fi icon to turn green (success) or red (fail).
Follow the instructions until completion. If you’d like to start
over, close the app and re-launch.
C
Tap + button to launch the configuration process and select TRITON.
Follow ALL instructions on screen.
Do not use the “Back” button on
Android devices.
B
NEXT
Wi-Fi Thermostat
For Electric Baseboards
DEVICE CHOICE
CALEO
ADD A DEVICE
Wi-Fi Controller
For Electric Water Heaters
TRITON
MY HOUSE
2/2
%
35
.5
°C
20
Have user download the mobile app and log into or create user account.
Configuration can only be done with iOS or Android (9 or better).
A
Before configuration, ensure that the probe lead cable (RJ12) is not connected to the controller unless instucted otherwise.
CONFIGURATION
9
Switch power back ON
to the water heater
DANGER ! Ensure the controller is properly secured
to the water heater before switching power on.
Electrical shock may result in serious injury or death.
8