Case Furniture Cross User manual

Cross
Oval Coffee Table
Care Instructions
Case Furniture Ltd
London, SW18 2HZ
United Kingdom
[email protected]
casefurniture.com
Cross Oval Coffee Table – designed by Matthew Hilton
To prolong the life of the product and retain its appearance and functionality,
we would like to give you some relevant information and care advice:-
This unit is manufactured with either oak or walnut.
Craftsmen manufacture this product and there is variety between each unit. This is
because wood is a natural product, with natural colour and grain variations.
Natural timber is affected by sunlight; this can can the wood colour to darken.
For this reason (especially if placed in direct sunlight) it is recommended that placing
objects in the same position for long periods of time is avoided. This potential colour
adjustment becomes less relevent as the product ages.
It is recommended that no abrasive cleaners or solvents are used to clean the unit.
Please only use proprietary furniture polishes or alternatively, warm water with
a diluted mild detergent.
We thank you for purchasing this product and wish you many years of enjoyable and
functional use.
For more related products please visit: casefurniture.com

Assembly Instructions
x 4
x 4
x 4
x 4
Required
A
B
C
D
x 8
E
Step 1. Attach brackets tting F
to the legs ensuring that the
bracket wing faces towards the
bottom of the leg as shown below.
attach with tting E and fully tighten.
Step 2. Attach the legs to the table top
aligning with the dowel tting Aand
using tting C in the outer hole on the
leg and tting B towards the centre.
Lightly tighten ttings B and C.
G x 1
F x 4
G
E
FA
G
C
B
D
GStep 3. Insertthe crossbar with the holes
facing towards the plates on the legs. With
assistance raise both sides of the crossbar
and insert tting D through the plates into
the holes on the crossbar and fullytighten.
Go back to the ttings on the legs ttings
B and C and fully tighten these.
Carefully turn the table over.