Case 570MXT User manual

Section Index -General
Fluids and Lubricants
Loctite Product Chart
Section Index -Engine
Stall Tests
Fuel System
Electrical
570MXT Loader Landscaper
Service Manual
6-43571
Table of Contents
Description
Removal and Installation of Electrical Components
Batteries
Instrument Cluster
Steering
Removal and Installation of Steering Components
Steering Control Valve
Front Axle -Two Wheel Drive
CASE CORPORATION
700 State Street
Racine, WI 53404 U.S.A. Bur 6-43581
Section No. Publication Form No.
6-43590
1002 6-43460
8-98902
6-43600
2002 6-43470
Tab3
Tab4
4000 6-41930
4003 7-49440
4005 6-41880
Tabs
5000 6-41950
5002 7-11920
5005 7-10470
I Reprinted I
Copyright© 2001 CNH America LLC.
All rights reserved.
Printed in U.S.A.
Issued July, 2001 Revised October, 2004

Table of Contents
Description
Section Index -Power Train
Standard (Carraro) Transmission Specifications, Pressure Checks and
Troubleshooting
Rear Axle and Planetaries
Brakes
Removal and Installation of Brake Components
For parking brake and brake pedal adjustments, see Section 9001.
Section Index -Hydraulics
Hydraulic Specifications, Troubleshooting, and Pressure Checks
Hydraulic Pump
Cylinders
Accumulator for Machines with Optional Ride Control
Flow Control Valve
Flow Control Priority Valve
Section Index -Mounted Equipment
Air Conditioning Troubleshooting For Systems With R-134a Refrigerant
Air Conditioning System Service For Systems With R-134a Refrigerant
Loader
ROPS Cab and Canopy
Standard and Mechanical Suspension Seat
Schematics
Electric and Hydraulic Schematic Foldout P.I.N. JJG0301854 and Before
Electric and Hydraulic Schematic Foldout P .I.N. JJGO3O1855 and After
Section No.
6002
6004
Tab7
7000
8002
8004
8006
8009
8011
8013
9002
9004
9006
9007
9009
In Rear Pocket
In Rear Pocket
NOTE: Case Corporation reserves the right to make improvements in design or
changes in specifications at any time without incurring any obligation to install them on
units previously sold.
Publication Form No.
6-43630
6-40700
6-43870
6-42040
6-43650
6-43511
7-14761
7-50880
7-52450
6-43890
6-76990
6-43660
7-50091
7-51030
6-42110
7-14800
6-42140
6-43530
6-77010
Bur 6-43581 Issued 7-01/Revised 10-04 Printed in U.S.A.
Find manuals at http://best-manuals.com/search?&s=CASE-643571

SECTION INDEX
GENERAL
Section Title Section Number
Standard Torque Specifications 1001
Fluid and Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1002
Metric Conversion Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1003
Loctite Product Chart
CASE CORPORATION
700 State Street
Racine, WI 53404 U.S.A.
CASE CANADA CORPORATION
3350 South Service Road
Burlington, ON L7N 3M6 CANADA Bur 6-43590
Copyright© 2001 Case Corporation
Printed in U.S.A.
July, 2001
Find manuals at http://best-manuals.com/search?&s=CASE-643571

Find manuals at http://best-manuals.com/search?&s=CASE-643571

Section
1001
STANDARD TORQUE SPECIFICATIONS
CASE CORPORATION
700 State Street
Racine, WI 53404 U.S.A.
CASE CANADA CORPORATION
450 Sherman Avenue
Hamilton, ON LSN 4C4 CANADA Bur 7-52931
© 1998 Case Corporation
Printed in U.S.A.
September, 1998
Find manuals at http://best-manuals.com/search?&s=CASE-643571

1001-2
TABLE OF CONTENTS
TORQUE SPECIFICATIONS - DECIMAL HARDWARE ....................................................................................................... 3
Grade 5 Bolts, Nuts, and Studs .................................................................................................................................. 3
Grade 8 Bolts, Nuts, and Studs .................................................................................................................................. 3
TORQUE SPECIFICATIONS - METRIC HARDWARE ........................................................................................................ 4
Grade 8.8 Bolts, Nuts, and Studs ................................................................................................................................ 4
Grade 12.9 Bolts, Nuts, and Studs .............................................................................................................................. 4
Grade 10.9 Bolts, Nuts, and Studs .............................................................................................................................. 4
TORQUE SPECIFICATIONS - STEEL HYDRAULIC FITTINGS ........................................................................................... 5
37 Degree Flare Fitting ............................................................................................................................................. 5
Straight Threads with O-ring ...................................................................................................................................... 5
Split Flange Mounting Bolts ....................................................................................................................................... 6
O-Ring Face Seal End .............................................................................................................................................. 6
O-Ring Boss End
Fitting or Lock Nut .................................................................................................................................................... 6
Pipe fittings ............................................................................................................................................................. 7
Bur 7-52931 Issued 9-98 Printed in U.S.A
Find manuals at http://best-manuals.com/search?&s=CASE-643571

1001-3
TORQUE SPECIFICATIONS -DECIMAL HARDWARE
Use the torques in this chart when special torques
are not given. These torques apply to fasteners with
both UNC and UNF threads as received from
suppliers dry, or when lubricated with engine oil. Not
applicable if special graphities, Molydisulfide
greases, or other extreme pressure lubricants are
used.
Grade 5 Bolts, Nuts, and Studs
000
Bur 7-52931
Grade 8 Bolts, Nuts, and Studs
0 ®
Issued 9-98
E7\
\!.Y
Printed in U.S.A.
Find manuals at http://best-manuals.com/search?&s=CASE-643571

1001-4
TORQUE SPECIFICATIONS- METRIC HARDWARE
Use the following torques when specifications are not
given.
These values apply to fasteners with both coarse and
fine threads as received from supplier, plated or
unplated, or when lubricated with engine oil. These
values do not apply if graphite or Molydisulfide
grease or oil is used. Use of a click type torque
wrench, or better is required.
Grade 8.8 Bolts, Nuts, and Studs
®
Bur 7-52931
Grade 10.9 Bolts, Nuts, and Studs
Grade 12.9 Bolts, Nuts, and Studs
Usually the torque values specified for grade 10.9
fasteners can be used satisfactorily on grade 12.9
fasteners.
Issued 9-98 Printed in U.S.A.
Find manuals at http://best-manuals.com/search?&s=CASE-643571

1001-5
TORQUE SPECIFICATIONS -STEEL HYDRAULIC FITTINGS
37 Degree Flare Fitting
Straight Threads with O-ring
-16 25.4 mm (1.0 inch) 1-5/16-12
203 to 253 150to187
-24 38.1 mm (1-1 /2 inch) 1-7/8-12
492 to 542 363 to 400
Bur 7-52931 Issued 9-98 Printed in U.S.A.
Find manuals at http://best-manuals.com/search?&s=CASE-643571

1001-6
-10
-12
Bur 7-52931
Split Flange Mounting Bolts
O-Ring Face Seal End
15.9 mm
(5/8 inch)
1-14
1-3/16-12
81 to 90
117 to 128
O-Ring Boss End
Fitting or Lock Nut
7/8-14
102 to 114
Issued 9-98 Printed in U.S.A.
Find manuals at http://best-manuals.com/search?&s=CASE-643571