Cashmaster One Use and care manual

Introduction
An update to your Cashmaster Printer One has been released.
The update is installed using a USB flash drive, which must first
be loaded with the supplied update files.
Pre-requisites
Please ensure your scale has
a minimum 50% battery charge
level and is connected to the
mains power supply.
Step 1: Prepare USB flash drive
1.1 Insert an empty USB flash drive into your PC's USB port.
1.2 Save the update ZIP file that you have received to your
PC - for example, on to your Desktop.
1.3 Open the ZIP file, and copy all of the contents
(including the Printer_firmware folder) to your
USB flash drive.
1.4 The USB flash drive is now ready to update the
Cashmaster One product.
Step 3: Update printer
bootloader and firmware
2.1 Press the main power key to switch on
your unit if necessary.
2.2 Ensure the main system battery level is
above 50% before proceeding.
2.3 Insert the USB flash drive – the USB flash
drive icon will appear in the status bar.
2.7
2.8
2.9
2.10
Cashmaster One range - Product firmware updates
10521A 1
Cashmaster One range - Product firmware updates
10521A 2
U:\Printer_Firmware\CM9002A.BIN
U:\Printer_Firmware\CB8013C-BLU.bin
2.4
2.5
05.03.2017 09:10
2.6
*
*
*
*
*The software numbers are provided as an example only.

Step 3: Verification
3.1
1.
2.
3.2
3.4 Congratulations! Your Cashmaster One is updated!
You can now remove the USB flash drive and press the
‘HOME’ button to return to the home menu.
3.3 Verify the following parameters:
Cashmaster Printer One: Connected
Bootloader: CB8013C
Firmware: CM9002A
North America
t: [phone]
e: [e-mail]
Germany
t: [phone]
e: [e-mail]
GLOBAL SUPPORT
cashmaster.com
Cashmaster One range - Product firmware updates
10521A 3
Product Firmware Update
Hong Kong and Asia
t: [phone]
e: [e-mail]
UK and all other customers
t: [phone]
e: [e-mail]
*The software numbers are provided as an example only.
*
*