Casio EX-V8 - EXILIM Hi-Zoom Digital Camera User manual

(_ X IL_.IIVI
Digital Camera
EX..V8
User's Guide
Thank
• Before usin
contained in
• Keep the User's Guide in
reference.
• For the most t
product, visit the official EXILIM
Website at http://www.exilim.com/
K830PCM1DMX

As you unpack your camera, check to make sure that all items shown below are included. If anything is missing, contact your original
retailer.
The shape of the AC power
cord plug varies according to
country or geographic area.
To attach the strap to the camera.
_Attachstrap h....
UNPACKING
2

UNPACKING
QUICK START BASICS 9
First, charge the battery ...................... 9
Configuring Display Language, Date,
and Time Settings .......................... 11
Using a Memory Card ....................... 13
Shooting a Snapshot ........................ 15
Viewing Snapshots ......................... 17
Shooting a Movie ........................... 18
Viewing a Movie ............................ 20
Deleting a File ............................. 21
INTRODUCTION 22
Features .................................. 22
Read this first! ............................. 23
Precautions during Use ..................... 26
GETTING READY 36
Charging the Battery ........................ 36
J To load the battery 36
J To charge the battery 37
J Replacing the Battery 41
W Battery Precautions 41
Using the Camera in another Country .......... 42
Turning Power On and Off ................... 43
Using a Memory Card ....................... 46
J Supported Memory Cards 46
i Loading a Memory Card into the Camera 48
Replacing the Memory Card 49
W Formatting a Memory Card 50
Using On-screen Menus ..................... 51
Changing the Contents of
the Monitor Screen ......................... 53
If you lose your way .......................... 54
CONTENTS
3

SHOOTING A SNAPSHOT 56
Specifying the Recording Mode ............... 56
Holding the Camera Correctly ................ 57
Shooting a Snapshot ........................ 59
J Specifying Irnage Size 62
J Specifying Image Quality 63
J Turning Off the AF Assist Lamp 64
J Using the easy Mode 65
W Snapshot Shooting Precautions 67
Auto Focus Restrictions 68
Shooting with Zoom ........................ 69
Using Flash ............................... 72
Using the Self-Timer ........................ 77
Using Continuous Shutter ................... 79
J Selecting the Continuous Shutter Mode 79
J Recording with Normal-speed Continuous
Shutter, High-speed Continuous Shutter,
and Flash Continuous Shutter 80
m Continuous Shutter Precautions 80
Adding Audio to a Snapshot ................. 81
Face Recognition ........................... 84
J Perforrning a face recognition recording
operation (Normal Mode) 84
Using the Family First Mode to
Give Priority to Particular Faces 85
m Face Recognition Precautions 90
Manually Configuring Shutter Speed
and Aperture Settings ....................... 91
SHOOTING A MOVIE 97
Movie Image Quality ........................ 97
Shooting a Movie ........................... 98
Movie Recording Precautions 99
Using Short Movie ......................... 100
Using Past Movie .......................... 102
USING BEST SHOT 104
Taking Bright Images without Flash .......... 110
Shooting Images of Business Cards and
Documents (Business Shot) ................. 111
Shooting ID Photographs ................... 114
Restoring an Old Photograph ................ 116
Recording Snapshots into a Multi-image
Layout (Layout Shots) ...................... 119
Auto Tracking a Moving Subject
(Auto Framing) ............................ 121
CONTENTS
4

ADVANCED SETTINGS 123
Changing the Focus Mode .................. 123
J Using Auto Focus 124
J Using Macro Focus 125
J Using Infinity Focus 131
@Using Manual Focus 131
Reducing the Effects of Hand and Subject
Movement ................................ 133
Shooting with the REC Light ................ 135
Correcting Image Brightness (EV Shift) ....... 136
Controlling White Balance .................. 138
Specifying ISO Sensitivity .................. 141
Specifying the Metering Mode ............... 142
Reducing the Effects of Overexposure and
Underexposure ........................... 143
Enhancing Human Skin Textures ............. 144
Using the Camera's Color Filter Effects ....... 145
Controlling Image Sharpness ................ 145
Controlling Color Saturation ................ 146
Adjusting Image Contrast ................... 146
Date Stamping Snapshots .................. 147
Using the On-screen Histogram to
Check Exposure ........................... 148
Other Useful Recording Functions ........... 150
J Using Key Custornize to Assign Functions
[_1] and [1_-] 150
J Displaying an On-screen Grid 151
J Displaying the Image You Just Recorded
(image Review) 152
J Using Icon Help 152
J Using Mode Memory to Configure Power On
Default Settings 153
J Resetting the Camera to Its Initial Factory
Defaults 155
VIEWING SNAPSHOTS
AND MOVIES 156
Viewing a Snapshot ........................ 156
W Listening to the Audio of an Audio Snapshot 157
Viewing aMovie ........................... 158
J Playing Back a Movie with Anti Shake 160
Playing a Slideshow on the Camera .......... 160
Viewing Camera Images on a TV ............. 166
Zooming the Displayed Image ............... 169
Using the 9-image Screen ................... 170
Using the Calendar Screen .................. 171
CONTENTS
5

EDITING IMAGES 173
Resizing a Snapshot ....................... 173
Cropping a Snapshot ...................... 174
Keystone Correction ....................... 175
Using Color Restoration to Correct
the Color of an Old Photograph .............. 176
Editing the Date and Time of an Image ........ 178
Rotating an Image ......................... 179
Combining Multiple Snapshots into
a Single Image (Layout Print) ................ 180
Adjusting White Balance of
a Recorded Image ......................... 182
Adjusting Image Brightness ................. 183
Reducing the Effects of Underexposure ....... 185
Editing a Movie on the Camera .............. 186
Creating a Snapshot of a Movie Frame
(MOTION PRINT) .......................... 189
USING AUDIO 191
Adding Audio to a Snapshot ................. 191
Recording Audio Only (Voice Recording) ...... 193
MANAGING YOUR FILES 196
Files and Folders .......................... 196
Protecting a File Against Deletion ............ 197
Using the FAVORITE Folder ................. 199
Copying Files ............................. 201
DELETING FILES 2O4
Deleting a Specific File ..................... 204
Deleting All Files .......................... 205
Deleting FAVORITE Folder Snapshots ........ 205
CONTENTS
6

OTHER SETTINGS 206
Configuring Camera Sound Settings .......... 206
Turning the Startup Screen On or Off ......... 208
Specifying the File Name Serial Number
Generation Rule ........................... 209
Changing the Camera Date
and Time Setting .......................... 210
Using World Time ......................... 212
E Configuring World Time Settings 212
Changing the Display Language ............. 214
Changing the Brightness of
the Monitor Screen ........................ 215
Changing the USB Port Protocol ............. 216
Configuring [_] (PLAY) Button Settings ..... 217
Formatting Built-in Memory ................. 218
PRINTING 219
Types of Printing .......................... 219
Using Professional Print Service ............. 220
Using Your Printer to Print Images ........... 220
Using DPOF to Specify Images to be
Printed and the Number of Copies ............ 224
m Date Stamping 226
Supported Protocols ....................... 227
CONTENTS
7

USING THE CAMERA WITH
A COMPUTER 229
What you can do .......................... 229
Using the Camera with a Windows Computer .. 230
J Viewing and Storing Irnages on a Computer 234
J Transfer of Images from the Camera
and Management of Images on the Computer 241
J Playing Movies 243
J Uploading Movie Files to YouTube 244
J Editing a Movie 247
J Transferring Images to the Camera 248
J Viewing User Documentation (PDF Files) 252
J User Registration 252
M Exiting the CD-ROM Menu 252
Using the Camera with a Macintosh .......... 253
J Viewing and Storing Irnages on a Macintosh 254
J Transfer of Images from the Camera
and Management of Images on Your Macintosh 259
J Playing Movies 259
J Viewing User Documentation (PDF Files) 260
@ Registering as a User 260
Reading Files Directly from a Memory Card .... 261
Memory Card Data ......................... 262
APPENDIX 265
General Guide ............................ 265
Monitor Screen Contents ................... 267
Menu Reference ........................... 269
Indicator Lamps ........................... 272
Troubleshooting Guide ..................... 275
Finding the Problem and Fixing It 275
@Display Messages 280
Specifications ............................. 282
CONTENTS
8

ILoading the Battery into the Camera
1. Open the battery cover.
r Screen
While pressing lightly on the
cover slide it in thedirection
indicated by the arrow to open.
2. Load the battery into the camera.
Battery contacts
Back
Back
(page 36)
3. Close the battery cover.
EXILIM logo
QUICK START BASICS
9

IUsing the USB Cradle to Charge
1. Plug the USB cradle into a household power
outlet.
AC adaptor
USB cradle
AC powercord
2. Place the camera onto the USB cradle.
[CHARGE] lamp
Red." Charging
Green: Charged (Full)
•It takes about 150 minutes to
achieve a full charge.
QUICK START BASICS
10

DISP ,1
[V] _--_[ SET ]
Zoom Controller
The settings on this page are required the first time you turn on
the camera after purchasing it.
• If you make a mistake when configuring the language, date,
and time settings, you can change the settings (pages 210,
214).
.
.
3.
.
5.
(pages 210,214)
Slide open the lens cover to turn on the
camera.
• Take care that you do not touch the lens when sliding the
lens cover.
Use [A], [V], [_], and [1_] to select the
language you want and then press [SET].
Use [&], [V], [_], and [1_] to select the area
where you will use the camera and then press
[SET].
Use [A] and [V] to select the city where you
will use the camera and then press [SET].
Use [A] and [V] to select the summer time
(DST) setting you want and then press [SET].
QUICK START BASICS
11

6. Use [A] and [Y] to select the date format and then press [SET].
Example: December 19, 2007
! ! Jec_:t_ i_t
07/12/19 YY/MM/DD
19/12/07 DD/MM/YY
12/19/07 MM/DD/YY
7. Set the date and the time.
Use [_] and [1_]to select the setting you want (year, month, day, hour, minute) and then use [A] and [V] to change the setting.
To switch between 12-hour and 24-hour format, slide the Zoom Controller.
8. When settings are completed, press [SET].
9. Close the lens cover to turn off the camera.
• After finishing this procedure, advance to the procedure on the next page.
QUICK START BASICS
12

iLoading a Memory Card into the Camera
When a memory card is loaded, the camera stores images you
shoot on the card.
NOTE
• Though the camera has built-in memory, using a memory
card provides additional capacity you can use to store more
images, high-quality and large-size images, and longer
movies.
• The camera will store images in its built-in memory if there
is no memory card loaded, if you prefer to use built-in
memory, skip this procedure and go to "Shooting a
Snapshot" on page 15.
• For information about memory card capacity, see page
282.
I. Open the battery cover.
While pressing lightly on the
cover, slide it in the direction
indicated by the arrow to open.
(page 46)
2. Load a memory card into the camera.
Front Front Back
With the front of the memory card facing upwards (towards
the monitor screen side of the camera), slide it into the card
slot and press until it clicks securely into place.
3. Close the battery cover.
QUICK START BASICS
13

IFormatting a Memory Card
Before you can use a memory card with your camera, you must
format it.
• Formatting a memory card that already has snapshots or
other files on it, will delete its contents. Normally you do not
need to format a memory card again. However, if storing to
a card has slowed down or if you notice any other
abnormality, re-format the card.
• Be sure to perform the following procedure on the camera
to format the memory card.
1. Slide open the lens cover to turn on the
camera.
• Takecarethatyoudo nottouchthelenswhenslidingthe
lenscover.
2. Press [MENU].
3. Use [41] and [1_] to select the "Set Up" tab.
4. Use [V] to select "Format" and then press [1_].
5. Press [A] to select "Format" and then press
[SET].
• To cancel formatting, select "Cancel" and then press
[SET].
• Wait until the "Busy... Please wait..." message disappears
from the monitor screen before doing anything else.
"Set Up"Tab Lens Cover
[MENU]
QUICK START BASICS
14

Snapshoticon
Shutter Button
Operation Lamp
Focus Frame
Monitor Screen
Mode dial
(page 56)
1. Slide open the lens cover to turn on the
camera.
• Take care that you do not touch the lens when sliding the
lens cover.
2. Align the mode dial with "hq" (Snapshot).
This causes "_" to appear on the monitor screen.
• If "_" (PLAY Mode) is on the monitor screen, make
sure that the lens cover is open and then press the
shutter button or [_] (PLAY). This will switch to the
currently selected REC Mode.
3. Point the camera at the subject.
4. While taking care to keep the camera still, half-
press the shutter button.
When the image is in focus, the camera will beep, the
operation lamp will light green, and the focus frame will turn
green.
QUICK START BASICS
15

5. Continuing to keep the camera still, press the
shutter button all the way down.
The recorded image will remain on the display for about one
second, and then it will be stored in memory. After that, the
camera will be ready to shoot the next image.
Snapshot Image Size and Image Quality
Your camera lets you select frorn among various image size
and quality settings. Note that image size and quality
settings affect how many images can be stored in memory.
• You can change the image size and quality settings as
required to shoot a smaller or lower-resolution image for
attachment to an e-mail message, for publishing on a
website, etc. You can also select an image size that suits
the size of paper you plan to use for printing your images.
For details, see pages 62, 63, and 282.
How do I half-press the shutter button?
The shutter button is designed to stop about half way down
when you press it lightly. Stopping at this point is called a
"half-press". When you half-press the shutter button, the
camera automatically adjusts exposure and focuses on the
subject it is currently pointed at.
Mastering how much pressure is required for a half-press
and a full-press of the shutter button is an important
technique for good-looking images.
Half-press Full-press
QUICK START BASICS
16

IFully pressing the shutter button without
waiting for Auto Focus
Fully pressing the shutter button without waiting for Auto
Focus to operate will record using Quick Shutter (page 129).
Quick Shutter lets you capture exactly the moment you want.
• With Quick Shutter, the camera uses high-speed Auto
Focus, which means you can capture quick moving action
more easily. Note, however, that some images may be out
of focus when Quick Shutter is used.
• Whenever possible, take a little extra time to half-press
the shutter button in order to ensure proper focus.
[_ ] (PLA Y)
(page 156)
[4]1_]
1. Press [_] to enter the PLAY mode.
Ifthere are multiple images in memory, use [_1]and [1_-]to
scroll through them.
ITo return to a REC mode
You can enter a REC Mode by performing any one of the
following operations.
- Press the shutter button.
- Align the mode dial with the desired REC mode.
- Press [[_] (PLAY) (with the lens cover open).
QUICK START BASICS
17

Shutter Button
Movie Icon
Remaining Recording Time
Mode dial
Recording Time
Movie Recording Screen
(page 97)
1. Align the mode dial with "6" (Movie).
This causes "_" (Movie) to appear on the monitor screen.
• If "_" (PLAY Mode) is on the monitor screen, make
sure that the lens cover is open and then press the
shutter button or [_] (PLAY). This will switch to the
currently selected REC Mode.
2. Press the shutter button to start shooting the
movie.
• Audio is also recorded during movie recording.
3. Press the shutter button again to stop
recording.
QUICK START BASICS
18

Movie Image Quality
Your camera lets you select from among six image quality
settings (UHQ, UHQ Wide, HQ, HQ Wide, Normal, LP) for
movies. To get the most out of the imaging capabilities of
your camera, use a quality setting of "HQ" (High Quality) or
"HQ Wide" or better.
Movie quality is a standard that determines the detail,
smoothness, and clarity of the image during playback.
Reducing image quality let's you shoot longer, so you can
switch to "Normal", or "LP" conserve remaining memory
capacity if you start to run low.
For details, see pages 97 and 283.
QUICK START BASICS
19

The film-like frame that appears on the monitor screen indicates
that this is an image from a movie.
"_ "Movie icon
(page 158)
2. Use [41] and [,] to select the movie you want
to play.
When scrolling through irnages, a movie is displayed on the
monitor screen by showing its first frame.
[SET]
[[_] (PLAY)
1. Press [F_-I]to enter the PLAY mode.
3. Press [SET] to start playback.
The monitor screen will return to the image selection screen
in step 2 after the end of the movie is reached.
• During movie playback, you can adjust volume, skip
forward and back, and perform other operations (page
159).
!To return to a REC mode
You can enter a REC Mode by performing any one of the
following operations.
- Press the shutter button.
- Align the mode dial with the desired REC mode.
- Press [[_] (PLAY) (with the lens cover open).
QUICK START BASICS
20