Casio IT-800 Series User manual

CASIO
IT-800 Series
Hardware Manual
(Version 1.02)
CASIO Computer Co., Ltd.
Copyright © 2010. All rights reserved.
May 2010

2
Table of the Contents
Editorial Record 4
Chapter 1. Overview of the Products 5
1.1 Features at a Glance 5
1.2 Available Models 7
1.3 Options and Interfaces 9
1.4 External Views 10
1.4.1 IT-800 10
1.4.2 HA-H60IO, HA-H62IO 12
1.4.3 HA-H30CHG 14
1.4.4 HA-D32DCHG 15
1.4.5 HA-H35CHG 16
1.4.6 HA-D20BAT 17
1.4.7 HA-D21LBAT 17
1.4.8 HA-C90PS5B 17
1.4.9 AD-S15050B 18
1.4.10 AD-S42120B 18
1.4.11 DT-380USB 18
Chapter 2. Hardware Specifications 19
2.1 IT-800 19
2.2 HA-H60IO 35
2.3 HA-H62IO 37
2.4 HA-H30CHG 39
2.5 HA-D32DCHG 40
2.6 HA-H35CHG 41
2.7 HA-D20BAT 42
2.8 HA-D21LBAT 42
2.9 AD-S15050B 43
2.10 AD-S42120B 44
Chapter 3. Product Identification and Reference Numbers 45
Chapter 4. Quality References 46
4.1 Environmental Performances 46
4.1.1 IT-800 46
4.1.2 HA-H60IO 46
4.1.3 HA-H62IO 47
4.1.4 HA-H30CHG 47
4.1.5 HA-D32DCHG 48
4.1.6 HA-H35CHG 48
4.1.7 HA-D20BAT, HA-D21LBAT 49
4.1.8 AD-S15050B 50
4.1.9 AD-S42120B 50
4.2 Electrical Performances 51
4.2.1 IT-800 51
4.2.2 HA-H60IO 51
4.2.3 HA-H62IO 52
4.2.4 HA-H30CHG 52
4.2.5 HA-D32DCHG 53

3
4.2.6 HA-H35CHG 53
4.2.7 HA-D20BAT, HA-D21LBAT 54
4.2.8 AD-S15050B 54
4.2.9 AD-S42120B 54
4.3 Mechanical Performances 55
4.3.1 IT-800 55
4.3.2 HA-H60IO 55
4.3.3 HA-H62IO 56
4.3.4 HA-H30CHG 56
4.3.5 HA-D32DCHG 57
4.3.6 HA-H35CHG 57
4.3.7 HA-D20BAT, HA-D21LBAT 58
4.3.8 AD-S15050B 58
4.3.9 AD-S42120B 59
4.4 Reliability 60
4.4.1 IT-800 60
4.4.2 HA-H60IO 61
4.4.3 HA-H62IO 61
4.4.4 HA-H30CHG 61
4.4.5 HA-D32DCHG 62
4.4.6 HA-H35CHG 62
4.4.7 HA-D20BAT, HA-D21LBAT 62
4.4.8 AD-S15050B 63
4.4.9 AD-S42120B 63
4.5 Compliance 64
4.5.1 IT-800 64
4.5.2 HA-H60IO 67
4.5.3 HA-H62IO 68
4.5.4 HA-H30CHG 69
4.5.5 HA-D32DCHG 70
4.5.6 HA-H35CHG 70
4.5.7 HA-D20BAT, HA-D21LBAT 71
4.5.8 AD-S15050B 71
4.5.9 AD-S42120B 72
4.6 Performance Reference 73
4.6.1 Scanning by Laser Scanner 73
4.6.2 Scanning by C-MOS Imager 75
4.7 Handling Contactless Smart Card 83
No part of this document may be produced or transmitted in any form or by any means, electronic or
mechanical, for any purpose, without the express written permission of CASIO Computer Co., Ltd.
in Tokyo Japan. Information in this document is subject to change without advance notice. CASIO
Computer Co., Ltd. makes no representations or warranties with respect to the contents or use of this
manual and specifically disclaims any express or implied warranties of merchantability or fitness for
any particular purpose.
© 2010 CASIO Computer Co., Ltd. All rights reserved.

4
Editorial Record
Manual
Version no. Date edited Page Content
1.00 September 2009 All Original version
1.01 October 2009 P5 Chinese Sensible Code (HanXin Code) is added.
P31 to P34 Weight is added.
P8, P17 Screen Protect Sheet model name is modified.
1.02 May 2010
P19 to P24
P26 Table 2.1 is modified.

5
1. Overview of the Products
1.1 Features at a Glance
The IT-800 series handheld terminal is designed using the new concept of the Human-centered
Design Process and is capable of performing various powerful functions including;
Outstanding Development Environment
•Microsoft® Windows Mobile®6.5 English Version as the integrated OS
•Visual Studio 2005
•Visual Studio 2008
CPU, Memory
•High-performance CPU
Marvell®PXA320 Application Processor (runs at 624 MHz, maximum)
•Large-capacity memory
RAM : 128 MB
F-ROM : 256 MB
Capability of Scanning Industrial Standard Bar Code Symbologies
•1D symbologies (with Laser Scanner models. See Chapter 1.2.)
UPC-A, UPC-E, EAN8, EAN13, Codabar (NW-7), Interleaved 2of5(ITF), MSI, Industrial 2of5,
Code39, Code93, Code128 (GS1-128), IATA, GS1 DataBar Omnidirectional, GS1 DataBar
Truncated, GS1 DataBar Limited, GS1 DataBar Expanded, GS1 DataBar
Omnidirectionalstacked, GS1 DataBar Expanded Stacked
•1D symbologies (with C-MOS Imager models. See Chapter 1.2.)
UPC-A, UPC-E, EAN8, EAN13, Codabar (NW-7), Code39, Interleaved 2of5 (ITF), MSI,
Code11, Code93, Code128 (GS1-128), IATA, GS1 DataBar Omnidirectional, GS1 DataBar
Limited, GS1 DataBar Expanded
•2D Stacked symbologies (with C-MOS Imager models. See Chapter 1.2.)
PDF417, Micro PDF, Code49, Composite, Codablock F, TLC39, GS1 DataBar Expanded
Stacked, GS1 DataBar Stacked
•2D Matrix symbologies (with C-MOS Imager models. See Chapter 1.2.)
Aztec, DataMatrix, Maxicode, QR Code, Micro QR, Chinese Sensible Code (HanXin Code)
Capturing Images
•Integrated digital camera (2.0 mega pixels, Autofocus)

6
Compatibility of Various Communication Options
•Integrated WWAN module compatible with GSM, GPRS, and EGPRS (EDGE)
•Integrated WLAN module compatible with IEEE802.11b/g standard
•Integrated GPS module
•Bluetooth® Version 2.0+EDR
•IrDA Version 1.3 for high speed infrared communication
•USB version 1.1 (Host/Client) for serial interface
Expandability
•microSD (SDHC) card slot
Improved Environment Durability
•Impact resistance : 1.5 m in height*
•Dust/Water-splash proof : IP54 level (compliant with IEC60529 International Standard)
* ; The drop durability height is a measured value resulting from actual testing. It does not necessarily guarantee
the product from damage.

7
1.2 Available Models
Table 1.1 List of available models
Model no. Scanner Camera NFC Extension slot WWAN
GPS
WLAN
(802.11 b/g) Bluetooth
IT-800R-05 - No Yes SDIO No Yes Yes
IT-800RGC-05 - Yes Yes SDIO Yes Yes Yes
IT-800R-15 Laser No Yes microSD No Yes Yes
IT-800RC-15 Laser Yes Yes microSD No Yes Yes
IT-800RGC-15 Laser Yes Yes microSD Yes Yes Yes
IT-800R-35 Imager No Yes microSD No Yes Yes
IT-800RC-35 Imager Yes Yes microSD No Yes Yes
IT-800RGC-35 Imager Yes Yes microSD Yes Yes Yes
IT-800R-15-CN Laser No Yes microSD No Yes Yes
IT-800RC-15-CN Laser Yes Yes microSD No Yes Yes
IT-800EC-05* - Yes Yes SDIO No No Yes
IT-800GC-05* - Yes Yes SDIO Yes No Yes
IT-800EC-35* Imager Yes Yes microSD No No Yes
IT-800GC-35* Imager Yes Yes microSD Yes No Yes
Notes
- “-CN” in the “Model no.” box denotes that the model is dedicated for China only.
-Model with “*” at its model number is for USA and Canada only.
-NFC is the contactless smart card technology developed by Sony Corporation.
Table 1.2 List of options
Option Product Model no. Remark
USB Cradle HA-H60IO
HA-H60IO-CN for China
Cradle
Ethernet Cradle HA-H62IO
HA-H62IO-CN for China
Battery Pack HA-D20BAT
HA-D20BAT-CN for China
Battery
Large Battery Pack HA-D21LBAT
HA-D21LBAT-CN for China
Dual Battery Charger HA-D32DCHG
HA-D32DCHG-CN for China
Cradle-type Battery Charger HA-H30CHG
HA-H30CHG-CN for China
Battery charger
Car Mounted-type Battery
Charger
HA-H35CHG
HA-H35CHG-CN for China
AC adaptor
(for HA-H60IO, HA-H62IO, HA-D32DCHG)
AD-S42120B-N
AD-S42120BE-CN
without power cable accompanied
for China
AC adaptor
(for IT-800, HA-H30CHG)
AD-S15050BE
AD-S15050B-N
AD-S15050BE-CN
without power cable accompanied
for China
Continue.

8
AC-CORD-EU for Europe
AC-CORD-US for USA/Canada
AC-CORD-TW for Taiwan
AC-CORD-KR for Korea
Power Cable
(for AD-S42120B-N, AD-S15050B-N)
AC-CORD-AU for Australia/New Zealand
Cable USB cable DT-380USB for cradle - PC
Screen Protect Sheet HA-C90PS5BOthers
Trigger Grip HA-H51TG
Note:
“-CN” in the “Model no.” box denotes that the model is dedicated for China only.

9
1.3 Options and Interfaces
Figure 1.1

10
1.4 External Views
1.4.1 IT-800
The following external views show all models of IT-800 series PDA. Refer to Table 1.3 for each
referenced part on the terminal.
Figure 1.2
Table 1.3
No. Name Description
1 Receiver Voice messages are output.
Orange : Charging battery pack.
Green : Charging battery pack is complete.
2 Indicator 1
Red : Battery pack is abnormal or the surrounding temperature is out
of the charging temperature range.
3 Indicator 2 Flashes in blue when operating via Bluetooth or in orange when operating
via WLAN, WWAN or GPS. Lights in green when reading a bar code
successfully or in red when alarming (programmable).
4 Power Key Turns on and off the power.
5 Touch Screen Displays text and operating instruction. Also used to operate the terminal and
enter data using stylus provided.
For the use with a smart card, get the smart card close to the screen where
NFC module is laid underneath of the display panel.
Continue.

11
6 Center Trigger Key Used to perform bar code reading. An arbitrary function can be assigned
to the key.
7 Function Keys Used starting a pre-registered application.
8 Execute Key Press when finishing entering numerical values or when moving to the
next step.
9 ‘A’ Key Changes text input mode.
10 Fn Key Used to make various settings in combination with the function keys or
numeric keys or when starting a pre-registered application.
11 CLR Key Used to clear one letter to the left of the input key.
12 Numeric Keys Used to enter numeric, decimal points, and letters.
13 Cursor Key The key operates much like PC’s cursor keys.
14 Microphone Used to input a sound including voice sound.
15 Speaker Buzzer and voice messages are output.
16 R Trigger Key Used to perform bar code reading.
17 L Trigger Key Used to perform bar code reading.
18 DC Jack Connect the dedicated AC Adaptor to here.
19 Reader Port Laser light (Laser scanner models) or LED light (C-MOS Imager
models) is emitted from this port that reads bar codes.
20 IR Port Used for communication with another terminal.
21 Power/Signal Terminals Used for USB communication or to supply power to the terminal and to
charge the battery pack via either Cradle or Cradle-type Battery Charger.
22 Strap Holes Used to attach the hand strap.
23 Digital Camera Used to capture photographs, images.
24 LED Light (Flash) Used to light up an object when capturing it with the digital camera.
25 Car-mounted charger
Fixed part
Used to fix with Car-mounted charger.
26 Reset Switch Used to reset the terminal.
27 micro SD Card Slot For insertion of a micro SD card into the slot in the battery compartment.
28 Battery Pack Cover Used to cover the battery compartment that holds the battery pack inside.
29 SIM Card Slot For insertion of a micro SIM card into the slot in the battery
compartment.
30 Cradle Mount Holes Used to mount the terminal in cradle.
31 Battery Pack Cover Lock
Switch
Used to lock the battery cover and to release it.
32 Extension Port Provided for connecting an external device. Used to connect Trigger Grip
here.
33 Stylus Used to input data on the touch panel.
34 Hand Belt Used to hold the terminal in the operator’s palm.
35 SD Card Slot For insertion of an SD card into the slot.

12
1.4.2 HA-H60IO, HA-H62IO
The following external views show the USB Cradles (HA-H60IO, HA-H60IO-CN) and Ethernet
Cradle (HA-H62IO, HA-H62IO-CN). Refer to Table 1.4 for each referenced part on the cradles.
Views
Figure 1.3
Table 1.4
No. Name Description
1 USB Client Port This port is used to transmit data (download or upload) by
connecting the Cradle to a PC using USB cable (DT-380USB). The
dedicated driver must be installed in the PC before connecting the
Cradle to the PC.
2 USB Host Port This port is used to connect a USB peripheral device.
3 Selector Switch This switch is used to switch between the USB host port and USB
client port.
This LED shows the LAN connection status.
Off : LAN cable not connected correctly.
4 LAN Connection Status
LED
(for HA-H62IO) On in Green : LAN cable connected correctly.
This LED shows the LAN operation status.
Off : No communication.
5 LAN Communication
Status LED
(for HA-H62IO) On in Green : Communication in progress.
6 LAN Port
(for HA-H62IO)
This port is used for connecting the cradle to PC or hub via LAN
cable so that data can be transmitted (uploaded or downloaded).
7 AC Adaptor Jack Connect the dedicated AC adaptor, AD-S42120B, here.
8 Terminal Detect Switch This switch detects when the terminal is mounted correctly on the
cradle.
Continue.

13
9 Power/Signal Terminals These contacts are used for communication and supplying power to
the terminal.
This LED indicates the power status and the mounting status of the
terminal in the cradle.
Off : The terminal is not mounted. Or, the AC adaptor is
not connected.
10 Power LED
On in Green : Power is turned on, and the terminal is correctly
set in the cradle.
11 Cradle Mound Hooks Used to hook the terminal in the cradle.

14
1.4.3 HA-H30CHG
The following external views show the Cradle-type Battery Chargers (HA-H30CHG,
HA-H30CHG-CN). Refer to Table 1.5 for each referenced part on the charger.
Views
Figure 1.4
Table 1.5
No. Name Description
1 AC Adaptor Jack Connect the dedicated AC adaptor, AD-S42120B, here.
2 Terminal Detect Switch This switch detects when the terminal is mounted correctly on the charger.
3 Power Terminals Power is supplied to the terminal via these contacts.
This LED indicates the power status and the mounting status of the terminal.
Off : The terminal is not mounted.
4 Power LED
On in green : Power is turned on and the terminal is mounted correctly.
5 Cradle Mount Hooks Used to hook the terminal in the cradle.

15
1.4.4 HA-D32DCHG
The following external views show the Dual Battery Chargers (HA-D32DCHG,
HA-D32DCHG-CN). Refer to Table 1.6 for each referenced part on the charger.
Views
Figure 1.5
Table 1.6
No. Name Description
This LED indicates the charge status of battery pack(s).
Off : Battery pack is not mounted.
Red : Charging.
Flashing Red : Problem on the battery pack.
Green : Charging complete.
1 Charge Indicator LED
Flashing Green : Standby.
2 AC Adaptor Jack This is used to supply power by connecting the dedicated AC adaptor,
AD-S42120B, here.
3 Dual Battery Charger
Connection Port
Used to connect multiple Dual Battery Chargers each other.
4 Connection Bracket
Attachment Holes
The connection bracket attaches here when you connect multiple Dual
Battery Chargers.

16
1.4.5 HA-H35CHG
The following external views show the Car Mounted-type Battery Chargers (HA-H35CHG,
HA-H35CHG-CN). Refer to Table 1.7 for each referenced part on the charger.
Views
Figure 1.6
Table 1.7
No. Name Description
1 AC Adaptor Jack This is used to supply power by connecting cigarette lighter socket in
vehicle via the dedicated cable.
2 Remove Buttons These are used to remove the terminal from the Car Mounted-type
Battery Charger.
3 Terminal Detect
Switch
This switch detects when the terminal is mounted correctly on the
charger.
4 Power Terminals Power is supplied to the terminal via these contacts.
This LED indicates the power status and the mounting status of the
terminal.
Off : The terminal is not mounted.
5 Charge Indicator
LED
On in green : Power is turned on and the terminal is mounted
correctly.

17
1.4.6 HA-D20BAT
The following external view shows the Battery Packs (HA-D20BAT, HA-D20BAT-CN).
Figure 1.7
1.4.7 HA-D21LBAT
The following external view shows the Large-capacity Battery Packs (HA-D21LBAT,
HA-D21LBAT-CN).
Figure 1.8
1.4.8 HA-C90PS5B
The following external view the Screen Protect Sheet (HA-C90PS5B).
Figure 1.9

18
1.4.9 AD-S15050B
The following external view shows the AC Adaptor (AD-S15050B).
Figure 1.10
Note:
Power cable does not accompany to the AC Adaptor.
1.4.10 AD-S42120B
The following external view shows the AC Adaptors (AD-S42120B, AD-S42120B-CN).
Figure 1.11
Note:
Power cable does not accompany to the AC Adaptor.
1.4.11 DT-380USB
The following external view shows the USB cable between cradle and PC.
Figure 1.5

19
2. Hardware Specifications
2.1 IT-800
Tables 2.1 and 2.2 explain about the hardware specifications of all models of IT-800 series including
the models with “-CN” denotation.
Table 2.1
Item Specification Remark
CPU, Memory
CPU Marvell®Xscale Processor PXA320 runs at
624 MHz
RAM 128 MB
FROM 256 MB (user area; approx. 150MB)
OS Microsoft® Windows Mobile®6.5 English
Version
Classic (without W-WAN model)
Professional (with W-WAN model)
Laser Scanner (IT-800R-15, RC-15, RGC-15, R-15-CN, RC-15-CN)
Laser emit angle Redirected downward at 0 degree
Wave Length 650±10 nm
Optical Output <1 mW
No. of scannings 100±20 per second
Resolution 0.127 mm (minimum) or greater
PCS 0.45 (minimum) or greater
Readable distance Approximately 40 to 400 mm
Readable width Max. 310 mm - at 400 mm depth
Daylight for scanning 50,000 Lux or less
Readable bar code
symbologies
UPC-A, UPC-E, EAN8, EAN13, Codabar
(NW-7), Interleaved 2of5 (ITF), MSI, ISBT,
Industrial 2of5, Code39, Code93, Code128
(GS1-128), IATA, GS1 DataBar
Omnidirectional, GS1 DataBar Truncated,
GS1 DataBar Limited, GS1 DataBar
Expanded, GS1 DataBar Stacked, GS1
DataBar Stacked Omnidirectional, GS1
DataBar Expanded Stacked
Continue.

20
C-MOS Imager (IT-800R-35, RC-35, RGC-35, EC-35, GC-35)
Method C-MOS Imager, 752 x 480 (Wide VGA),
monochrome
Aimer method Laser 650+10nm or -5nm <1 mW
Laser emit angle Redirected downward at 0 degree
Resolution 1D
Stacked 2D
Matrix 2D
: 0.15mm
: 0.169mm
: 0.25mm
PCS 0.45 (minimum)
Focal distance 4.5 inches (11.43 cm)
Daylight for scanning 50,000 Lux or less
Readable 1D
symbologies
UPC-A, UPC-E, EAN8, EAN13, Codabar
(NW-7), Interleaved 2of5 (ITF), MSI, Code11,
Code32, Code39, Code93, Code128
(GS1-128), IATA, GS1 DataBar
Omnidirectional, GS1 DataBar Truncated, GS1
DataBar Limited, GS1 DataBar Expanded
Readable Stacked 2D
symbologies
PDF417, Micro PDF, Code49, Composite,
Codablock F, TLC39, GS1 DataBar Expanded
Stacked, GS1 DataBar Stacked
Readable Matrix 2D
symbologies
Azteck, DataMatrix, Maxicode, QR Code,
Micro QR
Vibrator Notification of scanning bar code
Display
Display device TFT Blanview®by Casio
No. of dots 480 (horizontal) x 640 (vertical) VGA See “Dead Pixels”.
Dot pitch 0.117 (horizontal) x 0.117 (vertical) mm
Gradation 65,536 colors
Display font Scalable font
Backlight LED backlight
Viewing angle 35 degree (Left, Right), 10 degree (Up),
50 degree (Down)
Contrast 10 over
Touch Panel Resistive expression analog touch panel plastic
Indicator
LED Indicator 1; status of charging battery pack,
Indicator 2; status of communication
Dead Pixels
The LCD panel employed in this product uses high precision and substantial number of components
which commonly cause a small number of the pixels not to light or to remain lit all the time. This is due
to the characteristics of LCD panel yield in accuracy over 99.99% and permissible.
Continue.