Casio CASSIOPEIA PA-2400W User manual

PA-2400W
Hardware Manual
(Version 1.01 US)
CASIO Computer Co., Ltd.
Copyright © 1999. All rights reserved.
September 1999

2
Table of Contents
Chapter 1. Overview 3
1.1 Features 4
Chapter 2. System Configuration 5
2.1 System Block Diagram 5
2.2 Available Model 6
2.3 Available Options 6
2.4 PC Card 7
Chapter 3. External View 8
Chapter 4. Specifications 9
4.1 CPU 9
4.2 Memory 9
4.3 Touch Panel 9
4.4 Display 9
4.5 Switches 10
4.6 Communication Ports 10
4.6.1 16-pin Serial Interface 10
4.6.2 IrDA Interface 10
4.6.3 3-pin Interface 11
4.7 PC Card Interface 11
4.8 Compact Flash Card Interface 11
4.9 Power Supply 12
4.10 Speaker 12
4.11 Microphone 12
4.12 LED 13
4.13 Dimensions and Weight 13
4.14 Environment Data 13

3
1. Overview
This hardware manual describes the hardware specifications and descriptions of the H/PC (CASSIOPEIA
PA-2400W). The model runs the Windows CE US Ver2.11 operating system.
MS-DOS and Windows are registered trademarks of Microsoft Corporation in the United States and/or other
countries.

4
1.1 Features
For the features of pre-installed software products, please refer to Chapter 1.1 “Features” on page 3 of PA-
2400W Software Manual.

5
2. System Configuration
2.1 System Block Diagram
The system block diagram shows typical system configuration with the PA-2400W and its dedicated options
available. The system configuration can meet various needs required by end-users.
Fig. 2.1 System Block Diagram
!""
!""
!"" #
$%
&
'"
(%
)
$*
#
&)+
#,
$ #-
./
0/
/
1
)
. 2
3 , - /*
45 3 ,6
$ !!&+78
1- %
-9#%
$ !!&+78
$ !!&+78
/

6
2.2 Available Model
Table 2.1 Available Model Memory Size
Model DRAM Mask ROM FROM Remark
PA-2400W 8 MB 16 MB (OS: 8 MB x 2) - Pen version
2.3 Available Options
Table 2.2 List of available options
Product Model Description Remark
I/O Box (Master)PA-2110IF-EIrDA-SCSI conversion*2
I/O Box (Satellite)PA-2111IF-EIrDA-RS-232Cconversion Enable to recharge
Battery pack
(720 mA/H) PA-2020LI Lithium-ion rechargeable battery
pack
Dual recharger PA-2040DCHG-E Recharges the battery pack. New product
AD-C50200-U for PA-2400 AC input : 120V
AD-C50200-Gfor PA-2400AC input:230V *2
DT-825ADP-U for Satellite/Master I/O Boxes AC input : 120V
AC adaptor
DT-825ADP-Gfor Satellite/Master I/O BoxesACinput:230V *2
PC connection
cable TPX1375-010100
(no. 33356594) RS-232C cross-type cable To be supplied with
PA-2400W.
3-pincableSB-62ForconnectingCasio digital
camera and an existing model Existingproduct *2
3-pinBCRBR-100PenscannerExistingproduct *2
Compact flash card
adapter CF-AD1-S Compact flash to PCMCIA
conversion Newproduct *2
I/O Box daisy-chain
connection cable DT-888RSCRS-422 *2
DT-882RSC RS-232C cross-type
(9-pin female to 25-pin male) *2
DT-883RSC RS-232C cross-type
(9-pin female to 25-pin female) *2
DT-887AX RS-232C cross-type
(9-pin female to 9-pin female)
SB-751HFSCSI cablebetween *2
PA-2110IF-E andPC
SB-752HFSCSI cablebetween *2
PA-2110IF-E and PC
I/O Box cable
SB-753HPSCSI cablebetween *2
PA-2110IF-E and PC
IrDA printerHPLaser Jet 6PseLaser jet printeravailable from
HewlettPackard
Note:
*2 : These items are not supported in US. Please ask the product availability to our sales.

7
2.4 PC Card
Table2.3 Listof available PCcards (Some items are not supported in US, please ask our sales)
Product Model / Size of memory Remark
DT-635MC 256 KB
DT-636MC 512 KB
DT-637MC 1 MB
SRAM card
DT-638MC 2 MB
Existing products
DT-9031BFMC 4 MB
DT-9032BFMC 6 MB
DT-9033BFMC 10 MB
ATA flash card
DT-9034BFMC 20 MB
Existing products
CF-4-S 4 MB
CF-10-S 10 MB
Compact flash card
CF-15-S 15 MB
OEM fromSANDISK(new)
Note:
OperabilityofPC card notlistedin Table 2.3 abovemust be checked thoroughlybyuser if itisused in the
PA-2400W. CASIO willassumeno responsibilityagainstmalfunction, damageinthe PA-2400Wor
whatsoevercausedbyusing locallyavailable card.

8
3. External View
Fig. 3.1 External view of PA-2400W
CASSIOPEIA
A
LIGHT
CHG SYS
POWER
3P
PC CARD
EJECT
CONTRAST
ADP
IrDARS-232C NOTI
CF CARD
ROM
BOARD
LOCK FREE
BACK UP
BATTERY
MAIN BATTERY

9
4. Specifications
4.1 CPU
Table 4.1 CPU
Item Specification Remark
CPU Hitachi SH-3
Clock 80 MHz
4.2 Memory
Table 4.2 Memory
Item Specification Remark
DRAM 8 MB System memory, object storage memory
MASK ROM 16 MB (8MB x 2 pcs) System ROM
4.3 Touch Panel
Table 4.3 Touch Panel
Item Specification Remark
Type Analog resistance membrane (non-glare)
Resolution 480 (H) x 240 (V) dots A/D 10-bit
4.4 Display
Table 4.4 Display
Item Specification Remark
LCD panel FSTN
Backlight EL backlight Color: blue-green
Display size 480 (H) x 240 (V) dots
Dot pitch 0.275 mm/pitch
Gradation B/W 4 levels
Contrast Hardware control + temperature compensation

10
4.5 Switches
Table 4.5 Switches
Item Specification Remark
POWER switch Toggle switch for power ON/OFF
SIP key Toggle switch for SI panel ON/OFF
LIGHT switch Toggle switch for EL backlight ON/OFF
RESET switch Bootup Pin hole on the rear housing
Notification switch Notification LED OFF
Compact flash card
lock switch Power OFF by opening the cover
Card lock switch Mechanical lock (the system is operable
with this mechanism unlocked)
Battery lock switch Power OFF by opening the cover
4.6 Communication Ports
4.6.1 16-pin Serial Interface
Table 4.6 16-pin serial interface
Item Specification Remark
Synchronization Start/stop method RS-232C level
Connector type 16-pin
Baud rate 110 bps to 115.2 Kbps
Pin assignment Pin 1
2
3
4
5
6
7
8
NC
NC
DGND
V IN (+5V)
NC
ADP IN
ADP IN
DGND
Pin 9
10
11
12
13
14
15
16
DOCKB
CTS
DCD
RxD
TxD
RTS
DTR
DGND
4.6.2 IrDA Interface
Table 4.7 IrDA Interface
Item Specification Remark
Synchronization Start/stop method
Baud rate Max. 115.2 Kbps (IrDA ver. 1.0)
Note:
Due to individual IrDA’s specifications of a target device, communication via the IrDA interface may not
be possible. Always make sure first the connectivity and operability of the PA-2400W with a device.

11
4.6.3 3-pin Interface
Table 4.8 3-pin Interface
Item Specification Remark
Synchronization Start/stop method
Baud rate 110 bps to 38.4 Kbps
4.7 PC Card Interface
Table 4.9 PC Card Interface
Item Specification Remark
Standard Conforms to PC Card Standard
Slot 1 slot, Type II
Power supply Vcc: 3.3V/5V
Applicable card Refer to Chapter 2.4. PC Card.
Note:
A PC card that requires more than 300 mA as its operation power cannot be installed to the PA-2400W.
Use of such the card may result the life of battery to be shorten or the low battery warning message to appear
earlier or that the PA-2400W itself turns off the power without any advanced warning message.
4.8 Compact Flash Card Interface
Table 4.10 Compact flash card interface
Item Specification Remark
Slot 1 slot
Power supply Vcc: 3.3V
Applicable card Refer to Chapter 2.4. PC Card.

12
4.9 Power Supply
Table 4.11 Power Supply
Item Specification Remark
Lithium-ion battery pack
Operating time: Approx. 15 hours
(adequate for 10 minutes of continuous display, or
1 minute of continuous input)
Approx. 10 hours
(adequate for 90 Pocket Word strokes/minute)
Alkaline dry cell: LR6 x 2
Operating hours: Approx. 25 hours
(adequate for 10 minutes of continuous display, or
1 minute of continuous input)
Approx. 10 hours
(adequate for 90 Pocket Word strokes/minute)
See note below.
AC adaptor
AD-C50200-S (output DC5V 2A)
Sources of
main power
Contact-type recharging terminal Recharges battery via
I/O Box.
Sub-power
(for memory backup) Button-type lithium battery (CR2032 x 1)
Vanadium secondary battery (IVR2430 x 1)
Backup time: Approx. 5 years
(only if the new main battery is being installed always.)
With low voltage Alkaline dry cell: 28 days
(counting when “Low battery” indication appears)
With new Alkaline dry cell: 56 days
Memory backup
period
With low voltage lithium-ion battery pack:
22days
(counting when “Low battery” indication appears)
With fully charged lithium-ion battery pack:
36days
Days of backup period
are only estimate. They
may vary depending on
environment.
Note:
Temperature and humidity surrounding the PA-2400W can severely affect the operating hour of installed
batteries. High temperature and humidity will cause the battery life to be shorten.
4.10 Speaker
Table 4.12 Speaker
Item Specification Remark
Speaker Dynamic speaker, 20 mm diameter.
Sampling rate: 10-bit D/A
8/11.025/22.05 KHz
For audio output

13
4.11 Microphone
Table 4.13 Microphone
Item Specification Remark
Microphone Electronic condenser type
Sampling rate: 10-bit AD
8/11.025/22.05 KHz
For audio input
4.12 LED
Table 4.14 LED
Item Specification Available LED Remark
Alarm notification x 1 Notification LED RedLED Battery status indication x 1 Full-charge condition LED Green
4.13 Dimensions and Weight
Table 4.15
Dimensions 179 x 107 x 21 mm (when the cover is closed)
Weight 370 g (approx.)
4.14 Environment Data
Table 4.16
Temperature in operation 0 to 40
Temperature in storage -10 to 50
Humidity in operation 30 to 80%RH
Humidity in storage 30 to 90%RH
Other manuals for CASSIOPEIA PA-2400W
1
Table of contents
Other Casio Tablet manuals