Casio 5374 User manual

1
Operation Guide 5374/5392
MA1610-EB
Ú
#!3)/#/-054%2#/,4$
To change the day and day of the week settings
Press Bto change the day and Ato change the day of the week.
Note
•The day setting uses a 31-day month. Make adjustments for months of shorter
lengths.
•Avoid changing the day and day of the week settings between the hours of 9p.m.
and 4a.m.
Otherwise, the day and day of the week may not change correctly at midnight.
To adjust the time setting
When the second hand is at 12o’clock, pull the Crown out.
Rotate the Crown to change the time setting.
Push the Crown back in.
Note
•Take care that you set the correct AM or PM time.
•When changing the time, move the minute hand four or five minutes past your final
setting, and then back it up to the setting you want.
•The 24-Hour Hand indicates the current hour of the day. It makes one complete
rotation every 24hours.
Specifications
Accuracy: ±20seconds average per month
Battery: One silver oxide battery (Type: SR927SW)
Battery Life: Approximately 3 years
•Your watch may differ somewhat from the one shown in the illustration.
24-Hour Hand
Day
Day of the week
Location depends on module number.
5374 5392
* Some buttons are designed to be more diffi
cult to operate to
prevent unintended operation. To operate such a button, use
a thin pointed object to press its depression.
A*
B*
Crown
Crown Operations
Crown
Loosen
Some water-resistant models (100meters, 200meters)
have a screw-in crown. When you need to perform a crown
operation, rotate it towards you to unscrew it. Then pull the
crown out. Avoid applying undue force when pulling. The watch
loses its water resistance while the crown is unscrewed. After
performing a crown operation, fully screw the crown back in.
If your watch has a rotary bezel...
Start
Elapsed time
Current
You can rotate the bezel to align its ▼mark with the
minute hand. Then you will be able to tell how much
time has elapsed since aligning the ▼mark.