CASO DESIGN NOVEA T2 Installation instructions

Original
Operating Manual
T2 Style Toaster (11916)

2
USA Branch
CASO Design USA LLC
[e-mail]
www.CasoDesignUSA.com
T.: 908.604.0677
Document-Number: 11916 06-17-2021
Printing and typographical errors reserved.
© 2021 CASO Design USA LLC

1Operating Manual ...................................................................................5
1.1 IMPORTANT SAFEGUARDS ..................................................................................................5
1.2 General ....................................................................................................................................6
1.3 Information on this manual....................................................................................................6
1.4 Limitation of liability...............................................................................................................6
1.5 Warning notices......................................................................................................................7
1.6 Copyright protection ..............................................................................................................7
2Safety.......................................................................................................7
2.1 Intended use............................................................................................................................7
2.2 Sources of danger ..................................................................................................................8
2.2.1 Danger of burns ......................................................................................................8
2.2.2 Danger of fire ..........................................................................................................8
2.2.3 Dangers due to electrical power..............................................................................9
3Commissioning.......................................................................................9
3.1 Safety information ..................................................................................................................9
3.2 Delivery scope and transport inspection .............................................................................9
3.3 Unpacking .............................................................................................................................10
3.4 Disposal of the packaging ...................................................................................................10
3.4.1 Setup location requirements .................................................................................10
3.5 Electrical connection............................................................................................................11
4Design and Function ............................................................................11
4.1 Overview................................................................................................................................11
4.2 Warning notices on device ..................................................................................................12
5Operation and Handing ........................................................................12
5.1 Before using the appliance the first time ...........................................................................12
5.2 Operation - Toasting.............................................................................................................12
5.3 Operation - Bagel Toasting..................................................................................................13
5.4 Operation - Thawing .............................................................................................................13
5.5 Tips for ideal toasting results..............................................................................................14
6Cleaning and Maintenance ..................................................................14
6.1 Safety information ................................................................................................................14
6.2 Cleaning.................................................................................................................................15
6.3 Storage ..................................................................................................................................15
7Troubleshooting ...................................................................................15
7.1 Safety notices .......................................................................................................................15
7.2 Causes and rectification of faults .......................................................................................16
8Disposal of the Old Device .................................................................16

4
9Guarantee ..............................................................................................16
10 Technical Data ......................................................................................17

5
1 Operating Manual
1.1 IMPORTANT SAFEGUARDS
Please read the following general safety notices with regard – Always maintain safety
when working with any appliance.
1. Check that the mains voltage corresponds with the rating of the appliance before
operating.
2. Do not touch hot surfaces-Use handles or knobs.
3. To protect against electric shock, do not immerse cords, plugs or appliances in water or
any other liquid.
4. Do not leave any appliance unattended while it is operating. Unplug from outlet when not
in use or before cleaning.
5. Allow to cool before putting on or taking off any parts.
6. Do not operate the appliance with a damaged cord or plug, or after the appliance has
been damaged in any manner.
7. If the supply cord or appliance is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
8. The use of accessory attachments not recommended by the appliance manufacturer may
cause injuries.
9. Do not use outdoors.
10. Do not let the cord hang over the edge of a table or counter or let it come into contact with
any hot surfaces.
11. To disconnect-remove the plug from the outlet.
12. Do not pull plug out by the cord.
13. Do not use this product for anything other than intended use.
14. This product is intended for household use only.
15. No liability can be accepted for any damage caused by noncompliance with these
instructions or any other improper use or mishandling.
16. Use the toaster without bread for the first time. There will be some smoke at first; this is
normal.
17. The toaster reaches very high temperatures, particularly in the area of the openings for the
bread.
18. Bread may burn. Therefore this toaster must not be used near or below curtains and other
combustible materials.
19. Do not place the cable or any other object over the bread openings while the toaster is in
operation.
20. Do not attempt to dislodge food while the toaster is in operation.
21. Toasting lever must be in the‘UP’ position before attaching or disconnecting the plug from
wall outlet.
22. Do not insert metal objects or other utensils into the toaster, as this will cause an electric
shock or cause a fire.

6
23. Do not leave the toaster unattended while in operation.
24. This appliance can be used by persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user maintenance shall
not be made by children.
25. Keep the appliance and its cord out of reach of children.
26. The surfaces are liable to get hot during use.
27. The appliances are not intended to be operated by means of an external timer or separate
remote-control system.
28. The door or the outer surface may get hot when the appliance is operating.
1.2 General
Please read the information contained herein so that you can become familiar with your device
quickly and take advantage of the full scope of its functions.
Your Toaster will serve you for many years if you handle it and care for it properly.
We wish you a lot of pleasure in using it!
1.3 Information on this manual
These Operating Instructions are a component of the T2 Style Toaster (referred to hereafter as
the device) and provide you with important information for the initial commissioning, safety,
intended use and care of the device. The Operating Instructions must be available at all times
at the device. This Operating Manual must be read and applied by every person who is
instructed to work with the device: •Commissioning •Operation
•Troubleshooting and/or •Cleaning
Keep the Operating Manual in a safe place and pass it on to the subsequent owner along with
the device.
1.4 Limitation of liability
All the technical information, data and notices with regard to the installation, operation and
care are completely up-to-date at the time of printing and are compiled to the best of our
knowledge and belief, taking our past experience and findings into consideration.
No claims can be derived from the information provided, the illustrations or descriptions in this
manual. The manufacturer does not assume any liability for damages arising as a result of the
following:
•Non-observance of the manual •Uses for non-intended purposes
•Improper repairs •Technical alterations, modifications of the device
•Use of unauthorized spare parts
Modifications of the device are not recommended and are not covered by the guarantee.
All translations are carried out to the best of our knowledge. We do not assume any liability for
translation errors, not even if the translation was carried out by us or on our instructions. The
original English text remains solely binding.

7
1.5 Warning notices
The following warning notices are used in the Operating Manual concerned here.
Danger
A warning notice of this level of danger indicates a potentially dangerous situation.
If the dangerous situation is not avoided, this can lead to death or serious injuries.
►Observe the instructions in this warning notice in order to avoid the danger of death or
serious personal injuries.
Warning
A warning notice of this level of danger indicates a possible dangerous situation.
If the dangerous situation is not avoided, this can lead to serious injuries.
►Observe the instructions in this warning notice in order to avoid the personal injuries.
Attention
A warning notice of this level of danger indicates a possible dangerous situation.
If the dangerous situation is not avoided, this can lead to slight or moderate injuries.
►Observe the instructions in this warning notice in order to avoid the personal injuries.
Please note
A notice of this kind indicates additional information, which will simplify the handling of the
device.
1.6 Copyright protection
This document is copyright protected. CASO Design USA LLC. reserves all the rights,
including those for photomechanical reproduction, duplication and distribution using special
processes (e.g. data processing, data carriers, data networks), even partially. Subject to
content and technical changes.
2 Safety
This chapter provides you with important safety notices. Improper use can result in personal or
property damages.
2.1 Intended use
This device is only intended for use in households in enclosed spaces for
•Toasting or thawing sandwich bread, bread, bagels, buns or similar
Uses for a different purpose or for a purpose which exceeds this description are considered
incompatible with the intended or designated use.

8
Warning
Danger due to unintended use! Dangers can emanate from the device if it is used for an
unintended use and/or a different kind of use.
►Use the device exclusively for its intended use.
►Observe the procedural methods described in this Operating Manual.
Claims of all kinds due to damages resulting from unintended uses are excluded. The User
bears the sole risk.
2.2 Sources of danger
2.2.1 Danger of burns
Warning
The food prepared in the device, the device and the surfaces of the device can become
very hot.
Please observe the following safety notices in order not to burn or scald yourself or
others:
►The temperature of the accessible surface can become very hot when the device is in
operation.
►Do not touch the heating elements. Danger of burns!
►The upper side of the device is very hot during and after use. Do not store any items on the
device. Be carefull when handling hot food.
►Do not move or change the position of the device during use. Danger of burns!
►Let the device cool down before assembling/deassembling of parts and before cleaning.
►Keep children away from the device, since the surfaces of the device become hot during
use and remain hot for a some time.
►Do not remove jammed slices of bread when the device is in operation. Remove the plug
and let it cool down first.
2.2.2 Danger of fire
Warning
There is a danger of fire due to the ignition of the content in the event the device is not
used properly.
Observe the following safety notices to avoid dangers of fire:
►Never use the device to store or dry flammable materials.
►Do not use the device for storage of food or utensils.
►Never cover the device with towels or other materials during use. Heat and steam must be
free to escape. Danger of fire arises if the device is covered with flammable materials or
comes in contact with curtains.
►Do not use the device near to flammable materials for example curtains.
►The cord and / or other objects should not touch or be placed over the toast slots while the
device is in operation.

9
2.2.3 Dangers due to electrical power
Danger
Mortal danger due to electrical power! Mortal danger exists when coming into contact
with live wires or subassemblies!
Observe the following safety notices to avoid dangers due to electrical power:
►Do not open the housing on the device under any circumstances. There is a danger of an
electrical shock if live connections are touched and the electrical or mechanical structure is
altered. In addition, functional faults on the device can also occur.
►Do not operate this appliance if it has a damaged cord or plug, if it is not working properly or
if it has been damaged or dropped. If the supply cord is damaged, it must be replaced by
the manufacturer or its service agent or a similarly qualified person in order to avoid a
hazard.
►Do not unplug by pulling the cord pull the plug.
►Do not insert metal objects or other objects into the device, as this could lead to an electric
shock or fire.
►Do not operate the device if it has come into contact with water or other liquids.
►Unplug the device when it is not in operation, before cleaning and before performing any
repairs.
3 Commissioning
This chapter provides you with important safety notices during the initial commissioning of the
device. Observe the following notices to avoid dangers and damages:
3.1 Safety information
Warning
Personal and property damages can occur during commissioning of the device!
Observe the following safety notice to avoid such dangers:
►Packaging materials may not be used for playing. There is a danger of suffocation.
3.2 Delivery scope and transport inspection
As a rule, the T2 Style Toaster is delivered with the following components:
•T2 Style Toaster •crumb tray •operating instructions
Please note
►Examine the shipment for its completeness and for any visible damages.
►Immediately notify the carrier, the insurance and the supplier about any incomplete
shipment or damages as a result of inadequate packaging or due to transportation.

10
3.3 Unpacking
Remove the device out of the carton, remove the packaging material, shovel and measuring
container.
3.4 Disposal of the packaging
Caso believes in the importance of recycling and has selected packaging materials
that not only protect your unit from damage during transit, but can be recycled to
minimize any ecological impact. Recycling the packaging materials preserves raw
materials and reduces waste. Take any packaging materials that are no longer
required to a recycling collection point for proper disposal.
Please note
►If possible, keep the original packaging for the device for the duration of the guarantee
period of the device, in order that the device can be re-packaged properly in the event of a
guarantee claim.
3.4.1 Setup location requirements
In order to ensure the safe and trouble-free operation of the device, the setup location must
fulfil the following prerequisites:
•Place the device on a firm, flat, level and heat-resistant surface with sufficient load-bearing
capacity for the device and its contents.
•Dot not place the device on a metal surface.
•Choose the setup location in such a way that children cannot reach any hot surfaces on the
device.
•The device is not intended to be installed in a wall or a built-in cupboard.
•Do not set up the device in a hot, wet or extremely damp environment or near flammable
material.
•Do not place the device near a gas or electric cooker or an oven.
•The device requires an adequate flow of air in order to operate correctly.Place the device
with the backside against a wall (with 4” distance). Keep 8” free space at the other sides of
the device.
•Do not cover up any openings on the device and do not block these off.
•The electrical socket must be easily accessible so that the power lead can be disconnected
easily, in the case of an emergency.
•The device and power cord should not come in contact with hot surfaces. The device could
be damaged.
•The installation and assembly of this device in non-stationary setup locations must be
carried out by specialist companies / electricians, provided they guarantee the prerequisites
for the safe use of this device.

11
3.5 Electrical connection
In order to ensure the safe and trouble-free operation of the device, the following instructions
must be observed for the electrical connection:
•Before connecting the device, compare the connection data (voltage and frequency) on
the rating plate with those of your electrical network. This data must agree in order that
no damages occur in the device. If in doubt, ask your qualified electrician.
•The electrical outlet must be protected by a 16A safety cut-out switch, separately from
other electricity consumers.
•The use of multiple plugs or gangs is prohibited because of the danger of fire that is
involved with this.
•Make sure that the power cable is undamaged and has not been installed under the
oven or over hot or sharp surfaces.
•The electrical safety of the device is only guaranteed if the device is connected to a
properly installed protective conductor system. Operations using an electrical outlet
without a protective conductor are prohibited. If in doubt, have the house installation
checked over by a qualified electrician.
The manufacturer cannot be made responsible for damages that are caused by a
missing or damaged protective conductor.
4 Design and Function
This chapter provides you with important safety notices on the design and function of the
device.
4.1 Overview
1 Bread slot
2 Toast lever
3 Cancel button / Cancel
4 Bagel button / Bagel
5 Thaw button / Defrost
6 Roasting grade selector (1-6)
7 Crumb tray

12
4.2 Warning notices on device
Attention
Danger due to hot surface! There is a warning notice referring to dangers due to
hot surfaces located on the device. The surfaces of the device can become
extremely hot.
►Do not touch the hot surfaces of the device. Danger of burns!
►Do not set or lay any items on the device.
5 Operation and Handing
This chapter provides you with important notices with regard to operating the device. Observe
the following notices to avoid dangers and damages:
Warning
►Do not leave the device unsupervised during operation to be able to react quickly in case of
dangers.
Please note
►The crumb tray has always to be placed in the bottom of the device. It is also an additional
heat protection for the surface on which the device is placed.
5.1 Before using the appliance the first time
1. Remove all packaging materials and any transport safety devices.
2. Confirm that all accessories mentioned have been supplied.
3. Clean the toaster with a damp cloth.
4. Confirm that all components are properly assembled and the appliance is placed firmly.
5. Make sure that there is enough space between the toaster and the wall or other appliances,
as the toaster will become hot during operation.
6. Connect the appliance to the mains supply by means of the lead cable (120V,60 Hz).
7. Before using the toaster for the first time, you will have to perform a toasting process without
bread. Press the toast lever down until it latches into place.
8. When the toasting is finished, the toast lever automatically jumps up. You may now start
toasting bread.
5.2 Operation - Toasting
1. Prepare the toaster as described in chapter “Before first use”.
2. Put the slices of bread into the slot of toast chamber.
3. Select the desired toasting grade using the roasting grade selector. The adjustment is
continuous, corresponding level 1 to light toasting and level 6 to dark toasting. The toast will

13
be golden brown when you adjust the selector to toasting level 3 to a medium toasting
grade.
4. Push the toast lever down until it latches into place. The indicator light for “Cancel” lights up
and the toasting process starts.
5. You can interrupt the toasting process at any time pushing the button “Cancel”.
6. When the selected toasting grade is achieved, the bread is ejected automatically and the
indicator lamps go out. The appliance shuts off automatically.
5.3 Operation - Bagel Toasting
The Bagel function can be used to toast bread with one side. The outer side will be browned.
1. Place the bread slices in the slot of the toasting chamber.
2. Select the desired toasting grade using the roasting grade selector. The adjustment is
continuous, corresponding level 1 to light toasting and level 6 to dark toasting. The toast will
be golden brown when you adjust the selector to toasting level 3.
3. Press the toast lever down until it locks into place. The indicator light for “Cancel” lights up
and the toasting process starts.
4. Then press the button “Bagel” right away. The indicator lamp on this button lights up.
5. The bread is toasting one side only.
6. You can interrupt the Bagel cycle any time by pressing the “Cancel” button.
7. After completion of the bagel cycle the bread is automatically ejected and the indicator
lamps go out. The appliance shuts off automatically.
5.4 Operation - Thawing
The thawing function first thaws out the bread and then toasts it, which means that the thawing
cycle lasts somewhat longer than the normal toasting cycle.
1. Place the bread slices in the slot of the toasting chamber.
2. Select the desired toast darkness setting. We recommend the following toast darkness
settings:
1 or 2 for bread from the refrigerator or thin frozen bread slices.
3 or 4 for frozen waffles.
5 or 6 for thicker frozen bread slices and thick toast slices.
3. Press the toast lever down until it locks into place. The indicator light for “Cancel”lights up
and the toasting process starts.
4. Then press the button “Defrost” right away. The indicator lamp on this button lights up.
5. The bread is thawed and toasted.
6. You can interrupt the thawing cycle any time by pressing the “Cancel” button.
7. After completion of the thawing cycle the bread is automatically ejected and the indicator
lamps go out. The appliance shuts off automatically.

14
5.5 Tips for ideal toasting results
1. Different types of bread have varying moisture content. Therefore, the same toast darkness
setting can produce different results.
2. For bread that is slightly dry, use a lower toast darkness setting.
3. For fresh bread or whole grain bread, use a higher toast darkness setting.
4. Bread with an irregular surface requires a higher toast darkness setting.
5. Thick bread slices need more time for toasting; it may even be necessary to toast the bread
a second time.
6. Cut rolls in half before toasting.
7. If you toast only one slice, please select a low toast darkness setting.
8. If you toast several slices one after the other, the bread will be somewhat darker at the
same toast darkness setting.
9. To toast frozen bread, waffles, etc. please use the thaw button.
6 Cleaning and Maintenance
This chapter provides you with important notices with regard to cleaning and maintaining the
device. Please observe the notices to prevent damages due to cleaning the device incorrectly
and to ensure trouble-free operation.
6.1 Safety information
Attention
Please observe the following safety notices, before you commence with cleaning the device:
►The device must be cleaned and food residues must be removed at regular intervals. If the
device is not maintained in a clean condition, this will have a detrimental effect on the
service life of the device and can also result in a dangerous condition in the device as well
as in the growth of fungus and bacteria. Unplug the device before cleaning.
►The device is hot after it is used. There is a danger of burns! Wait until the device has
cooled down.
►Clean the device after use as soon as it has cooled down. Waiting longer periods of time
unnecessarily complicates cleaning and can make it impossible in extreme cases.
Excessive accumulations of dirt can even damage the device under certain circumstances.
Remaining food leftovers can catch fire during next heating.
►If dampness penetrates into the device, this can damage the electronic components. Please
ensure that no liquid can enter the interior of the device through the ventilation slots.
►Do not use any aggressive or abrasive cleaning agents or solvents.
►Do not scrape off stubborn dirt with hard items.
►Never immerse the device or its plug into water. Liquid is not allowed to come in contact
with parts of the device.

15
6.2 Cleaning
UNPLUG THE DEVICE BEFORE CLEANING.
1. Allow the appliance to cool before cleaning it.
2. Before cleaning, always turn off the appliance and unplug it from the power supply.
3. Do not immerse the appliance and power cord in water or other liquids or wash them
in the dishwasher.
4. Wipe off the toaster with a damp cloth and a little dish washing detergent. Do not use any
abrasive scouring agents, steel wool, metal objects, hot cleaning agents or disinfectants,
since they can damage the appliance.
5. To remove stuck bread slices, unplug the toaster and turn it over and shake lightly. Never
attempt to remove stuck bread slices with sharp or pointed tools or silverware.
6. Remove crumbs and any small pieces of bread from the crumb tray regularly. To do this,
pull the crumb tray on the side all the way out and empty it. Wipe the crumb tray with a
damp cloth, then dry it thoroughly and push it back into the appliance.
7. The appliance must be completely dry before you use it again.
Please note
►Do not use any knifes, forks or other utensils to remove bread from the device or to clean
the device. Pull the plug of the device when bread is jammed in the device and try to
remove it then.
6.3 Storage
•Never wrap the cord around the device.
•Wrap the cord properly around the cable storage at the bottom of the device.
•Pull the plug when the device is not in operation and store the device out of reach of
children at dry and safe place.
7 Troubleshooting
This chapter provides you with important notices with regard to operating the device. Observe
the following notices to avoid dangers and damages:
7.1 Safety notices
Attention
►Only qualified electricians, who have been trained by the manufacturer, may carry out any
repairs on electrical equipment.
►Improperly performed repairs can cause considerable dangers for the user and damages to
the device.

16
7.2 Causes and rectification of faults
The following table assists in localizing and rectifying minor faults.
Problem Solution
The device is not functioning Please check whether the power plug is
properly plugged.
Attention
►If you are unable to solve the problem with the steps shown above, please contact
Customer Service.
8 Disposal of the Old Device
To protect the environment, it’s important to dispose of old electronic devices
properly. Do not place your old unit in the non-recyclable waste under any
circumstances.
Please note
►Please take your old unit to the nearest recycling center for safe disposal.
►Until it can be disposed of properly, store your old unit away from children.
9 Guarantee
Caso USA WARRANTY
We provide a 12 month guarantee for this product, commencing from the date of sale, for
faults which are attributable to production or material faults.
Your legal guarantee entitlements in accordance with § 439 ff. BGB-E remain unaffected by
this. The guarantee does not include damages, which were incurred as a result of improper
handling or use, as well as malfunctions which only have a minor effect on the function or the
value of the device. Consumables, transit damages, inasmuch as we are not responsible for
these, as well as damages, which were incurred as a result of any repairs that were not
performed by us, are also excluded from the guarantee entitlements.
This device is designed for use in domestic situations and has the appropriate performance
levels. Any use in commercial situations is only covered under the guarantee to the extent that
it would be comparable with the stresses of being used in a domestic situation. It is not
intended for any additional, commercial use.
In the event of justified complaints, we will repair the faulty device at our discretion or replace it
with a comparable trouble-free device.
Any pending faults must be reported within 14 days of delivery.
All further claims are excluded.

17
To enforce a guarantee claim, please contact us prior to returning the device (always provide
us with proof of purchase) and after this contact, ship the unit back to Caso USA for repair or
replacement at our option.
[e-mail]
10 Technical Data
Device Toaster
Name T2 Style
Item No. 11916
Voltage 120V/60HZ
Power consumption 1000W
Net Weight 2.79 lbs
Product dimension (WXHXD) inch 15.60" x 4.50" x 7.10"

18
Manuel d'utilisation
original
T2 Style Toaster (11916)

19
Succursale USA
CASO Design USA LLC
[e-mail]
www.CasoDesignUSA.com
T. : 908.604.0677
Numéro de document : 11916 06-17-2020
Sous réserve d'erreurs d'impression et de typographie.
© 2021 CASO Design USA LLC

11 Manuel d'utilisation ..............................................................................22
11.1 GARANTIES IMPORTANTES ...............................................................................................22
11.2 Généralités ............................................................................................................................23
11.3 Informations relatives à ce manuel.....................................................................................23
11.4 Limite de responsabilités.....................................................................................................23
11.5 Avis d'avertissement............................................................................................................24
11.6 Protection intellectuelle .......................................................................................................24
12 Sécurité..................................................................................................25
12.1 Utilisation conforme .............................................................................................................25
12.2 Sources de danger ...............................................................................................................25
12.2.1 Danger de brûlures ...............................................................................................25
12.2.2 Danger d'incendie .................................................................................................26
12.2.3 Dangers dus à l'énergie électrique........................................................................26
13 Mise en service .....................................................................................27
13.1 Consignes de sécurité .........................................................................................................27
13.2 Inventaire et contrôle de transport .....................................................................................27
13.3 Déballage...............................................................................................................................27
13.4 Elimination des emballages.................................................................................................27
13.4.1 Exigences relatives au lieu d'installation ...............................................................27
13.5 Raccordement électrique.....................................................................................................28
14 Conception et fonctionnement............................................................29
14.1 Schéma ..................................................................................................................................29
14.2 Avertissements sur l'appareil..............................................................................................29
15 Opération et manipulation ...................................................................29
15.1 Avant la première utilisation de l'appareil..........................................................................30
15.2 Opération - Toast ..................................................................................................................30
15.3 Opération - Grillage de bagels.............................................................................................30
15.4 Fonctionnement - Décongélation........................................................................................31
15.5 Conseils pour un résultat idéal de grillage ........................................................................31
16 Nettoyage et entretien..........................................................................32
16.1 Informations sur la sécurité.................................................................................................32
16.2 Nettoyage ..............................................................................................................................32
16.3 Stockage................................................................................................................................33
17 Dépannage ............................................................................................33
17.1 Consignes de sécurité .........................................................................................................33
17.2 Causes et rectification des défauts ....................................................................................33
18 Elimination des appareils usés ...........................................................34