CASSIDA UNOplus UNIVERSAL COUNTERFEIT DETECTOR
1.6 IMPORTANT SAFETY INSTRUCTIONS
Connect the AC/DC adapter to the Cassida UNOplus unit and plug the adapter plug
into a power outlet. Turn the Cassida UNOplus on by toggling the --/o switch on rear
of the unit to – (see 1.3).
3. DETECTIONS
3.1 INFRARED DETECTION (IR)
To activate infrared detection, press “IR” key. After pressing the key, the indicator will be
lit, showing that detector is ready to operate. Put the bill on the detector (desktop) viewing
surface. When LCD screen will display a picture, the hidden security marks, which are
invisible by visual examination, can be scanned. Check the presence of infrared security
marks on the bill according to the standards.
3.2 ULTRAVIOLET DETECTION (UV)
To activate ultraviolet detection, press “UV” key. Put the bill on the detector (desktop)
viewing surface. The ultraviolet detection allows to verify the background illumination and
fibers of the bills by ultraviolet light. Check the presence of fibers on the bill, and ensure
that background illumination corresponds to the standards.
3.3 TRANSPARENT INFRARED DETECTION AND WATERMARKS (WM)
To activate ultraviolet detection, press “UV” key. Put the bill on the detector (desktop)
viewing surface. The ultraviolet detection allows to verify the background illumination and
fibers of the bills by ultraviolet light. Check the presence of fibers on the bill, and ensure
that background illumination corresponds to the standards.
BILL
BILL