Cassidian THR9i User manual

This document is the property of Cassidian Finland Oy and should not be copied or circulated without permission.
www.cassidian.com
DEFENDING WORLD SECURITY
Description of the main icons
End/reject a call
Access
corresponding
functions
displayed
on the screen
Navigate through
menu items or
keypad
Navigation
Send a status message
Access the list of
talkgroups
or the list of channels
Dial/accept a phone call
Write a text message
Access fast menu
Connect charger
Bottom
microphone
Loudspeaker
ICONS DESCRIPTION
Transmitting a one-way call
Receiving a one-way call
Status message/s received
Battery bar icon
Signal strength bar icon
Loudspeaker in use
Loudspeaker and earpiece not in use
Top microphone selected
Speakers and tones muted
Keypad locked
Text message/s received
Scanning activated
Air interface encryption not in use
Transmission barring active
Connection to network lost, limited
services available
GPS receiver on
THR9i
Quick Guide
UM
PS11357AENAA01
05/2012
Getting familiar with your radio
Adjust
volume
Make a red key call
Activate/deactivate
loudspeaker
Select group
and channel, or
press to select
home group
(group selector,
back key)
Switch power on/off
Push to talk
(PTT key)
Connect
accessories
Make e.g. a home
group call or
dispatcher call
depending on your
configuration
(duty key)
Earpiece
TRA/TR/APP/00034 01.01/EN
Livre.book Page 2 Mercredi, 23. mai 2012 3:25 15

Getting started
Install the battery
1Slide the battery in the radio body
2Press the bottom part of the battery into its
position until it clicks
Install the antenna
Turn the antenna clockwise in its dedicated slot
on top of the terminal
Switch the radio on
1Press and hold the power on/off switch
2If the radio asks for a phone or a security code,
enter these and select OK
Note: the initial phone code is 1234
Note: this Quick Guide aims at helping users get
started with their radio. The detailed
information on radio usage is available in the
full User Guide at
https://pmronline.cassidian.com.
Making and receiving calls (1/2)
Make a call
Group call
1Press
2Scroll to the desired folder
3Choose Select
4Turn the group selector until you reach the
desired group
5Press and hold the PTT key
6Start speaking when a short tone is played
Express call
1To a TETRA number: type the number
To a phone number: type the number, press
and scroll to Phone
2Press and hold the PTT key
Phone call
1Enter the area code and phone number
2Press
3Scroll to the relevant number type among
Private, Abbr. number, Phone, or Office ext. no.
4Press
Making and receiving calls (2/2)
Red key call
Press and hold the red key call button to call the
predefined destination
Call in direct mode
1Select Menu → Settings→Phone settings
→Active mode→Direct
2Turn the group selector until you reach the
desired channel and press the back key to select
the relevant group
or
enter the recipient's number
3Press and hold the PTT key
Respond to a call
Phone call
Press
Group or Express call
1Press and hold the PTT key
2Start speaking when a short tone is played
Sending text messages
Send a status message
1Press
2Scroll to the relevant status message
3Select OK
4Enter the phone number or search for the
recipient
5Select OK
6Scroll to the relevant number type
7Select Send
Send a text message
1Press
2Write the message
3Select Send
4Enter the phone number or search for the
recipient
5Select OK
6Scroll to the relevant number type
7Select Send
Note: your organisation may predefine different
functions for the and key
Livre.book Page 1 Mercredi, 23. mai 2012 3:25 15