CASTLECREEK 709179 User manual

Congratulations on your CASTLECREEK® purchase.
We’re proud to help you furnish and enhance the place you call home. Whether
indoors or outside, CASTLECREEK® is the perfect choice for comfortable living at
an exceptional value.
Item #709179 CASTLECREEK® Oversized Rocking Chair
Forassistancewithyourproduct,pleasecontacttheSportsman’sGuidecustomer
serviceat1‐800‐888‐3006Mon.‐Fri.7:00amto9:00pm,Sat.‐Sun.8:00amto8:00pm
CSTorgotosportsmansguide.com/customerservice/contactus
sportsmansguide.com 709179 - CC Oversized Rocking Chair 1 of 4

OVERSIZED ROCKER ASSEMBLY INSTRUCTIONS
PARTS LIST
Left Side (1) 1pc Right Side (2) 1pc Back (3) 1pc
Seat (4) 1pc Cross Bar (5) 1pc
HARDWARE LIST
Screw (A) 10pcs Hex Wrench (B) 1pc Screw Cover (C) 10pcs
ADDITIONAL DETAILS:
WARNING: This package contains small parts and is a choking hazard, keep away from children and
pets.
•Read and understand all warnings, cautions, assembly, installation and use instructions prior to
assembling, installing or using this product. Failure to follow all warnings, cautions and instructions
may result in serious injury or damage to personal property.
•Confirm all parts are present before assembly. If any part is missing, cracked or damaged, please
contact Sportsman’s Guide customer service before assembly.
•Assemble product on a soft surface (like the cardboard box) to protect from scratching or damaging
the item and other surfaces.
•At least two people are recommended for safe assembly and installation of this product.
•Do not completely tighten screws until the rocker is fully assembled and on a level surface.
•CAUTION: NEVER stand on this item.
•NEVER exceed the weight limit of 400 pounds (181 kgs).
!
Tools Required:
Hex wrench (included)
2 of 4

STEP 2
Attach the Left Side (1) to the
Back (3), the Seat (4), and the
Cross Bar (5) using five Screws
(A) and Hex Wrench (B).
STEP 1
Attach the Right Side (2) to the
Back (3), the Seat (4), and the
Cross Bar (5) using five Screws
(A) and Hex Wrench (B).
3 of 4

STEP 4
Assembly complete.
STEP 3
Make sure that all Screws (A) are
secure and tight.
Cover all of the Screws (A) with the
Screw Covers (C). Please note that
the screw covers can be hard to
remove once in place.
Made in China
4 of 4