Catalyst The Catalyst 34 User manual

Introduction
The CatalystTM 34 by Universal Electron-
ics, Inc. is the complete solution for all of
your remote control requirements. It is
designed to operate up to four devices
with the emphasis on features and func-
tions of your dedicated component(s).
The Catalyst 34 is also customizable to
allow for key configurations that meet
your specific needs.It’s also packed with
these features for you to choose from:
• Preprogrammed technology
for easy setup
• Designed for use with up to
four devices
• Inclusive audio library
• Upgradeability
• Choice of dedicated device(s)
• Custom silk screening
• Custom color system and
key definitions
This manual provides a basic overview
on how to set up and operate the Cata-
lyst 34. Please read the following instruc-
tions to see how easy setup is.
Features & Func-
tions
Use the Key Charts to learn how the Cat-
alyst 34 functions.
Key Charts
The LED (red light) blinks to
show that the remote
control is working and is
sending signals.
Use SETUP for all
programming sequences.
Press PWR once to turn on
or off the selected home
entertainment component.
Press AUX, CBL, VCR, or TV
once to select a home
entertainment component
to control.
Use the keypad (0 - 9) to
directly select channels
(for example, 09 or 31).
Press MUTE once to turn
sound off or on.
Press ENTER once after
entering channel numbers
on some TV models.
Use VOL + (or VOL -) to raise
(or lower) the sound volume.
Use CH + (or CH-) to select
the next higher (or lower)
channel.
Press LAST once to recall
the last channel and to
page back one screen in the
main menu.
Press INPUT once to switch
the input of the chosen
component.
Use GUIDE to display the
program guide.
Use EXIT to exit out of the
selected component’s menu
or guide.
Use the cursor keys to move
the cursor in the program
guide and menu screens.
Use SELECT to choose
options from your selected
component’s menu
or guide.
Use INFO to display current
channel and program
information.
Press MENU to access the
menu of your
chosen component.
Use the transport keys to
control your VCR, or CD or
DVD player.
Use these keys for specific
features on your dedicated
components.
Installing Batter-
ies
1. On the back ofthe Catalyst 34, push
the tab and lift off the battery cover.
2. Obtain two (2) fully-charged AA
alkaline batteries.Match the + and –
marks on the batteries to the + and –
marks in the battery case,then insert
the new batteries.
3. Press the battery cover back into
place.The tab should click when the
cover is locked.
4. Test the unit by pressing PWR and
any mode key (e.g., AUX, CBL, VCR,
etc.). If the batteries are inserted
correctly, the LED will blink once.
NOTE: When batteries need
replacement, the Catalyst 34 will blink
twice with every key press. Simply
replace them and the remote control
will be restored to its full functionality,
including favorite settings.
Programming
Component
Control
The Catalyst 34 can control up to four
different components. Perform the
following instructions for each
component you want controlled:
NOTE: For TV/VCR Combo control,
see the next section.
1. Turn on a component (e.g., VCR)
and, ifapplicable, insert media,
(e.g.,cassette or disc).
NOTE: Please read steps 2-4
completely before proceeding.
We recommend highlighting or
writing down the codes and device
you wish to program before moving
onto step 2.
2. On the Catalyst 34, press a component
key once (i.e., AUX, CBL, VCR, or TV).
Press and hold SETUP until the LED
blinks twice, then release SETUP.
3. Use the Manufacturer’s Codes (on the
back side) to locate the the type of
component and brand name and
then enter the first four-digit code for
your component. If performed
correctly, the LED will blink twice.
NOTE: If the LED did not blink
twice, then repeat steps 2 through 3
and try entering the same code again.
4. Aim the Catalyst 34 at the component
and press PWR once. It should turn off.
If it does not respond, repeat steps 2-
3, trying each code for your brand
until you find one that works. If it still
does not work, try searching for the
code (see Searching For Your Code).
NOTE: If the device does not have a
PWR key, press PLAY.
5. Repeat steps 1 through 4 for each
component you want the Catalyst 34
to control.
Programming
TV/VCR
Combo Control
Perform the following instructions to
control a TV/VCR Combo:
1. Turn on the TV/VCR Combo and insert
a video cassette.
NOTE: Please read steps 2-4
completely before proceeding.
We recommend highlighting or
writing down the code for the brand
you wish to program before moving
onto step 2.
2. On the Catalyst 34, press VCR. Press
and hold SETUP until the LED blinks
twice,then release SETUP.
3. Use the Setup Codes For TV/VCR
Combos (on the back side) to locate
the brand name and then enter the
first four-digit code for your
component. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice,
then repeat steps 2 through 3 and try
entering the same code again.
4. Aim the Catalyst 34at the component
and press PWR once. It should turn off.
If it does not respond, repeat steps
2-3, trying each code for your brand
until you find one that works. If it still
does not work,try searching for the
code (see Searching For Your Code).
NOTE: If the device does not have a
PWR key, press PLAY.
5. If you’ve located a setup code that
works, but it has a separate TV code,
you’ll also need to program it into the
Catalyst 34 to access volume control
as follows:
a. Press TV once.
The LED will blink twice.
b. Enter the TV code for your
TV/VCR Combo.
If correct, the LED will blink twice.
If there is no separate TV code listed,
you will need to perform the
following steps to access
volume control:
a. Press and hold SETUP until the LED
blinks twice, then release SETUP.
b. Enter 9- 9- 3.
The LED will blink twice.
c. Press VCR once.
The LED will blink twice.
Searching for
Your Code
If your device does not respond to the
Catalyst 34 after trying all codes listed
for your brand, or if your brand is not
listed at all, try searching for your code.
For example, to search for a code for
your TV:
Remote Control User Guide
Page 1

1. On the Catalyst 34, press TV once.
2. Press and hold SETUP until the LED
blinks twice, then release SETUP.
3. Enter 9- 9- 1.The LED will blink twice.
4. Aim the remote control at the the TV
and slowly alternate between
pressing PWR and TV.
Stop when the TV turns off.
NOTE: In the search mode, the Catalyst
34 will send IR codes from its library
to the selected device, starting with
the most popular code first.
5. Press SETUP once to lock in the code.
6. To search for the codes of your other
components, repeat steps 1 through
5, but substitute the appropriate key
(i.e., AUX, CBL, or VCR) for the
(Auxiliary, Cable, or VCR) component
you are searching for.
Checking
the Codes
If you have set up the Catalyst 34 using
the Searching For Your Code procedure,
you may need to find out which four-
digit code is operating your equipment:
For example, to find out which code is
operating your TV:
1. On the Catalyst 34, press TV once.
2. Press and hold SETUP until the LED
blinks twice, then release SETUP.
3. Enter 9-9- 0.
The LED will blink twice.
4.To view the code for the first digit,
press 1once. Wait 3 seconds, count
the LED blinks (e.g., 3 blinks = 3)
and write down the number.
NOTE: If a code digit is “0” ,
the LED will not blink.
5. Repeat step 4 three more times for
remaining digits. Use 2for the
second digit, 3for the third digit,
and 4for the fourth digit.
6. To check for the codes of your other
components, repeat steps 1 through
5, but substitute the appropriate key
(i.e., AUX, CBL, or VCR) component
you are checking. As before, write
down each four-digit code.
Re-Assigning
Device Keys
The Catalyst 34 can be set up to
control a second TV or VCR,or any
combination of eight home
entertainment components.
For example, to have the Catalyst 34
control a TV, a Cable Converter, and two
VCRs, you will need to re-assign the un-
used AUX key to operate the second
VCR as follows:
1. On the Catalyst 34, press and hold
SETUP until the LED blinks twice,
then release SETUP.
2. Enter 9- 9- 2.
The LED will blink twice.
3. Press VCR once,then press AUX once.
4. The AUX key is now ready to be
programmed for your second VCR.
See Programming Component
Control.
To re-assign other device keys, repeat
steps 1 through 4 by substituting the key
sequence from the below chart for the
most popular components:
To Re-Assign
Key Sequence
TV as 2nd VCR key: SETUP - 9 - 9 -
2- VCR - TV
TV as 2nd CBL key: SETUP - 9 - 9 -
2- CBL - TV
TV as 2nd AUX key: SETUP - 9 - 9 -
2- AUX - TV
TV back to TV: SETUP - 9 - 9 -
2- TV - TV
VCR as 2nd TV key: S ETUP - 9 - 9 -
2- TV - VCR
VCR as 2nd CBL key: SETUP - 9 - 9 -
2- CBL - VCR
VCR as 2nd AUX key: SETUP - 9 - 9 -
2- AUX - VCR
VCR back to VCR: SETUP - 9 - 9 -
2- VCR - VCR
AUX as 2nd TV key: SETUP - 9 - 9 -
2- TV - AUX
AUX as 2nd VCR key: SETUP - 9 - 9 -
2- VCR - AUX
AUX as 2nd CBL key: SETUP - 9 - 9 -
2- CBL - AUX
AUX back to AUX:SETUP - 9 - 9 -
2- AUX - AUX
When a re-assignment is done, the LED
will blink twice to confirm your choice.
At that time, you will need to program
the Catalyst 34 to control the new
component (see Programming Compo-
nent Control).
Changing
Volume Lock
The Catalyst 34 is set to control volume
of a component through your TV while
in the TV, VCR, or Cable mode. However,
in the auxiliary mode (i.e., AUX), you
have separate control of your audio
component’s volume. If your TV is not re-
mote controllable, or if you want
volume to be controlled by a different
component, you can change the Volume
Lock setting to control a volume through
a non-associated mode (e.g., through
the cable in the TV mode).
To change Volume Lock
to the another mode:
1. On the Catalyst 34,press and hold
SETUP until the LED blinks twice,
then release SETUP.
2. Enter 9- 9- 3and then press any
mode key once (except TV).
The LED will blink twice.
3. Now,whenever you press VOL +,
VOL –, or MUTE, volume will be
controlled by your mode choice.
To change Volume Lock back to the
TV mode:
To change Volume Lock
back to the TV mode:
1. On the Catalyst 34,press and hold
SETUP until the LED blinks twice,
then release SETUP.
2. Enter 9- 9- 3and then press TV.
The LED will blink twice.
3. Now,whenever you press VOL +,
VOL –, or MUTE on the Catalyst 34,
volume will be controlled by your TV.
Troubleshooting
PROBLEM: LED does not blink when
you press a key.
SOLUTION: Replace the batteries with
two (2) new AA alkaline
batteries.
PROBLEM: LED blinks when you press
a key, but home
entertainment component
does not respond.
SOLUTION: Make sure the Catalyst 34 is
aimed at your home
entertainment component
and is not farther than 15
feet away.
PROBLEM: Catalyst 34 does not
control home
entertainment
components or
commands are not
working properly.
SOLUTION: Try all listed codes for the
component brands being
set up. Make sure they can
be operated with an
infrared remote control.
PROBLEM: TV/VCR combo does not
respond properly.
SOLUTION: Use the VCR codes for your
brand. Some combo units
may require both a TV
code and a VCR code
for full operation.
PROBLEM: No volume on a 2nd TV.
SOLUTION: Follow instructions in
Changing Volume Lock.
PROBLEM: CH+, CH-, and LAST do
not work for your RCA TV.
SOLUTION: Due to RCA design (1983-
1987), only the original
remote control will
operate these functions.
PROBLEM: Changing channels does
not work properly.
SOLUTION: If original remote control
required pressing ENTER
to change channels, press
ENTER on the Catalyst 34
after entering the
channel number.
PROBLEM: Tried “Search Method”
and still could not find
a working code.
SOLUTION: Try the “Search Method”
again after
clearing out
the device key as follows:
Press and hold ENTER
until red light blinks
twice, then release. Next
enter 9- 9- 2.
Then press
and release the device
key to be cleared twice.
PROBLEM: Remote control does
not turn on Sony or
Sharp TV/VCR Combo.
SOLUTION: For power on, these
products require
programming TV codes.
For Sony, use TV code
0000 and VCR code 0032.
For Sharp, use TV code
0093 and VCR code 0048.
Page 2

Setup Codes for TVs:
AOC 0030,0019
Admiral 0093
Aiko 0092
Akai 0030
Alaron 0179
Allegro 0720,0774
Ambassador 0177
Ampro 0751
Anam 0180
Audiovox 0451, 0180, 0092,
0623
Aumark 0060
Baysonic 0180
Belcor 0019
Bell & Howell 0154,0016
Bradford 0180
Brockwood 0019
Broksonic 0236,0463
CXC0180
Candle 0030, 0056
Carnivale 0030
Carver 0054
Celebrity 0000
Cineral 0451,0092
Citizen 0060, 0030, 0056,
0039, 0092
Concerto 0056
Contec 0180
Craig 0180
Crosley 0054
Crown 0180, 0039
Curtis Mathes 0047, 0054, 0154,
0051, 0451, 0093,
0060, 0030, 0145,
0056, 0016, 0039,
0166, 0466, 1147,
1347
Daewoo 0451, 0019, 0039,
0092, 0623, 0624
Daytron 0019, 0039
Denon 0145
Dumont 0017, 0019
Dwin 0720, 0774
Electroband 0000
Emerson 0154, 0236, 0463,
0180, 0282, 0178,
0019, 0179, 0039,
0177, 0623, 0624
Envision 0030
Fisher 0154
Fujitsu 0179
Funai 0180, 0179, 0171
Futuretech 0180
GE 0047, 0051, 0451,
0093, 0282, 0178,
0021, 0135, 1147,
1347
Gibralter 0017, 0030, 0019
Go Video 0060
GoldStar 0030, 0178, 0019,
0056, 0039
Gradiente 0053, 0056
Grunpy 0180, 0179
Hallmark 0178
Harley Davidson 0179
Harman/Kardon 0054
Harvard 0180
Hitachi 0145, 0056, 0151
Infinity 0054
Inteq 0017
JBL 0054
JCB 0000
JVC 0053
KEC 0180
KTV 0180, 0030, 0039
Kenwood 0030, 0019
LG 0056
LXI 0047, 0054, 0017,
0154, 0156, 0178,
1347
Logik 0016
Luxman 0056
MGA 0150, 0030, 0178,
0019
MTC 0060, 0030, 0019,
0056
Magnavox 0054, 0030, 0179
Majestic 0016
Marantz 0054, 0030
Matsushita 0051, 0250
Megatron 0178, 0145
Memorex 0154, 0250, 0150,
0060, 0178, 0056,
0016
Midland 0047, 0017, 0051,
0039, 0135
Minutz 0021
Mitsubishi 0093, 0150, 0178,
0019
Motorola 0093
Multitech 0180
NAD 0156, 0178, 0166
NEC 0030, 0019, 0056
NTC 0092
Nikko 0047, 0017, 0154,
0156, 0030, 0178,
0092,1347
Onwa 0180
Optimus 0154, 0250, 0166
Optonica 0093, 0165
Orion 0236, 0463, 0179
Panasonic 0047, 0054, 0154,
0156, 0051, 0250,
0093, 0165, 0150,
0060, 0053, 0178,
0145, 1347
Penney 0047, 0156, 0051,
0060, 0030, 0178,
0021, 0019, 0056,
0039, 0135, 1347
Philco 0054, 0463, 0030,
0145, 0019
Philips 0054, 0017, 0000,
0021, 0019, 0039
Pilot 0030, 0019, 0039
Pioneer 0166
Portland 0019, 0039, 0092
Prism 0051
Proscan 0047, 0030, 1347
Proton 0178, 0466
Pulsar 0017, 0019
Quasar 0051, 0250, 0165
RCA 0047, 0051, 0093,
0019, 0090, 0135,
1047, 1147,
1247, 1347
Radio Shack 0047, 0154, 0165,
0180, 0030, 0178,
0019, 0056, 0039
Realistic 0154, 0165, 0180,
0030, 0178, 0019,
0056, 0039
Runco 0017, 0030, 0603
SSS 0180,0019
Sampo 0030, 0039
Samsung 0060, 0030, 0178,
0019, 0056, 0039
Samsux 0039
Sansei 0451
Sansui 0463
Sanyo 0154
Scimitsu 0019
Scotch 0178
Scott 0236, 0180, 0178,
0019, 0179
Sears 0047, 0054, 0154,
0156, 0178, 0179,
0056, 0171
Semivox 0180
Semp 0156
Sharp 0093, 0165, 0039
Shogun 0019
Signature 0016
Sony 0000
Soundesign 0180, 0178, 0179
Squareview 0171
Starlite 0180
Supreme 0000
Sylvania 0054, 0030
Symphonic 0171
TMK 0178,0056,0177
Tandy 0093
Technics 0047, 0017, 0051,
0250, 1347
Technol Ace 0179
Techwood 0051, 0056
Teknika 0054, 0180, 0150,
0060, 0019, 0179,
0056, 0016, 0039,
0092
Telefunken 0056
Toshiba 0154, 0156, 0060
Totevision 0039
Universal 0021
Vector Research 0030
Victor 0053
Vidikron 0054
Vidtech 0178, 0019
Wards 0054, 0156, 0165,
0030, 0178, 0021,
0019, 0179, 0056,
0016, 0135
White Westinghouse 0623, 0624
Yamaha 0030, 0019
Zenith 0017, 0016, 0092
Setup Codes for VCRs:
Admiral 0048
Adventura 0000
Aiko 0278
Aiwa 0037, 0000
Akai 0041
American High 0035
Asha 0240
Audiovox 0037
Beaumark 0240
Bell & Howell 0104
Broksonic 0184, 0121, 0209,
0002
CCE 0072, 0278
Calix 0037
Canon 0035
Carver 0081
Cineral 0278
Citizen 0037, 0278
Colt 0072
Craig 0037, 0047, 0240,
0072, 0271
Curtis Mathes 0060, 0035,
0041, 0162
Cybernex 0240
Daewoo 0045,0278
Denon 0042
Dynatech 0000
Electrohome 0037
Electrophonic 0037
Emerex 0032
Emerson 0037, 0184, 0000,
0121, 0043, 0209,
0002, 0278
Fisher 0047, 0104
Fuji 0035, 0033
Funai 0000
GE 0060, 0035, 0048,
0240
Garrard 0000
Go Video 0526
GoldStar 0037, 0038
Gradiente 0000
HI-Q 0047
Harley Davidson 0000
Harman/Kardon 0081, 0038
Harwood 0072
Headquarter 0046
Hitachi0 000, 0042, 0041
JVC 0067, 0041
Jensen 0041
KEC 0037, 0278
KLH 0072
Kenwood 0067, 0041, 0038,
0046
Kodak 0035, 0037
LXI 0037
Lloyd’s 0000
Logik 0072
MEI 0035
MGA 0240, 0043
MGN Technology 0240
MTC 0240, 0000
Magnasonic 0278
Magnavox 0035, 0039, 0081,
0000, 0149
Magnin 0240
Marantz 0035,0081,0038
Marta 0037
Matsushita 0035, 0162, 0454
Memorex 0035, 0037, 0048,
0039, 0047, 0240,
0000, 0104, 0046,
1162,1262
Minolta 0042
Mitsubishi 0048, 0067, 0043
Motorola 0035, 0048
Multitech 0000, 0072
NAP 0035, 0037, 0039,
0042, 0033
NEC 0104, 0067, 0041,
0038
Nikko 0037
Noblex 0240
Olympus 0035
Optimus 0037, 0048, 0104,
0162, 0454, 1062,
1162, 1262
Orion 0184, 0002
Panasonic 0035, 0162, 0225,
0454, 1162
Penney 0035, 0037, 0240,
0042, 0038
Pentax 0042
Philco 0035, 0209
Philips 0035, 0081
Pilot 0037
Pioneer 0067
Profitronic 0240
Proscan 0060
Protec 0072
Pulsar 0039
Quarter 0046
Quartz 0046
Quasar 0035, 0162, 0454,
1162
RCA 0060, 0035, 0048,
0240, 0042, 0149
Radio Shack 0000
Radix 0037
Randex 0037
Realistic 0035, 0037, 0048,
0047, 0000, 0104,
0046
Runco 0039
STS 0042
Samsung 0240, 0045
Sanky 0048, 0039
Sansui 0000, 0067, 0041,
0271
Sanyo 0047, 0240, 0104,
0046
Scott 0184, 0045,
0121, 0043
Sears 0035, 0037,0 047,
0000, 0042,
0104, 0046
Semp 0045
Sharp 0048
Shintom 0072
Shogun 0240
Signature 0035
Singer 0072
Sony 0035, 0032, 0000,
0033
Sylvania 0035, 0081, 0000,
0043
Symphonic 0000
TMK 0240
Tatung 0041
Teac 0000, 0041
Technics 0060, 0035,
0039, 0162
Teknika 0035, 0037, 0000
Thomas 0000
Toshiba 0045, 0043
Totevision 0037, 0240
Unitech 0240
Vector 0045
Vector Research 0038
Video Concepts 0045
Videosonic 0240
Wards 0060, 0035, 0048,
0047, 0081, 0240,
0045, 0000, 0042,
0072, 0149
White Westinghouse 0278
XR-1000 0035, 0000, 0072
Yamaha 0041, 0038
Zenith 0039, 0000, 0033
Setup Codes for
TV/VCR Combos:
American High 0035 (for TV use 0051)
Brocksonic 0002, 0294
Colt 0072
Curtis Mathis 0035 (for TV use 0051)
Daewoo 0278
Emerson 0002, 0294, 0479
Funai 0000
GE 0035 (for TV use 0051),
0060 (for TV use 0047),
0048 (for TV use 0093),
0240
Hitachi 0035 (for TV use 0051),
0000
HQ 0000
Lloyds 0000
MGA 0240
Magnavox 0081 (for TV use 0054),
0035 (for TV use 0051),
0000
Magnin 0240
Memorex 0037, 0162 (for TV use 0250)
Mitsubishi 0048 (for TV use 0093)
Orion 0002,0294,0479
Panasonic 0035 (for TV use 0051),
0162 (for TV use 0250)
Penney 0035 (for TV use 0051),0240,
0162 (for TV use 0250)
Quasar 0035 (for TV use 0051),
0162 (for TV use 0250)
RCA 0060 (for TV use 0047),
0035 (for TV use 0051),
0048 (for TV use 0093)
Sansui 0000, 0479
Sanyo 0240
Sears 0000, 0037
Sharp 0048 (for TV use 0093)
Sony 0032 (for TV use 0000)
Symphonic 0000
Setup Codes for
Cable Coverters:
ABC 0003, 0008, 0014,
0017, 0007,
0011, 0013
Allegro 0153, 0315
Archer 0153, 0797
Bell & Howell 0014
Century 0153
Citizen 0153, 0315
Comtronics 0040
Contec 0019
Eastern 0002
Emerson 0797
Everquest 0015, 0040
Focus 0400
Garrard 0153
Gemini 0015
General Instrument
0476, 0276, 0011, 0810
GoldStar 0144, 0040
Goodmind 0797
Hamlin 0020, 0259,
0009, 0034
Hitachi 0011
Hytex 0007
Jasco 0015, 0153, 0315
Jerrold 0003, 0012, 0476,
0276, 0014, 0015,
0011, 0810
Magnavox 0014
Memorex 0000
Movie Time 0063
NAP 0007
NSC 0063
Oak 0019, 0007
Optimus 0021
Panasonic 0000, 0107, 0021
Paragon 0000
Philips 0153
Pioneer 0144, 0533
Popular Mechanics 0400
Proscan 0021
Pulsar 0000
Quasar 0000
RCA 0021
Radio Shack 0015, 0315,
0797, 0883
Recoton 0400
Regal 0020, 0259
Regency 0002
Rembrandt 0011
Runco 0000
SL Marx 0040
Samsung 0144, 0040
Scientific Atlanta 0008, 0477, 0017, 0877
Signal 0015, 0040
Signature 0011
Sprucer 0021
Starcom 0003, 0015
Stargate 0015, 0040, 0797
Starquest 0015
TV86 0063
Teleview 0040
Tocom 0012, 0013
Toshiba 0000
Tusa 0015
Unika 0153
United Artists 0007
Universal 0153, 0191
Viewstar 0063
Zenith 0008, 0000,
0015, 0525
Zentek 0400
Setup Codes for
Satellite or
DBS Receivers:
AlphaStar 0772
Echostar 0775
Expressvu 0775
General Instrument 0627, 0361, 0869
HTS 0775
Hitachi 0819
Hughes Net.Sys. 0749
JVC 0775
Jerrold 0627, 0361
Magnavox 0724, 0722
Memorex 0724
Next Level 0869
Panasonic 0701
Philips 0724, 0722
Primestar 0627, 0361
Proscan 0566
RCA 0566, 0143, 0855
Radio Shack 0566, 0869
Sony 0639
Star Choice 0869
Toshiba 0790
Uniden 0724, 0722
Zenith 0856
Setup Codes
for CD Players:
Aiwa 0157, 0124
Burmester 0420
California Audio Lab 0029
Carver 0157, 0179, 0437
Curtis Mathes 0029
DKK 0000
Denon 0003, 0873
Emerson 0305
Fisher 0179, 0174
Garrard 0420, 0393
Genexxa 0032, 0305
Harman/Kardon 0157, 0173
Hitachi 0032
JVC 0072
Kenwood 0028, 0037, 0190,
0826, 0681
Krell 0157
LXI 0305
Linn 0157
MCS 0029
MTC 0420
Magnavox 0157, 0305
Marantz 0029, 0157, 0180
Mission 0157
NSM 0157
Nikko 0174
Onkyo 0101, 0868
Optimus 0000, 0032, 0179,
0305, 0037, 0420,
0145, 0468, 0437
Panasonic 0029, 0303
Parasound 0420
Philips 0157, 0626
Pioneer 0032, 0305,
0468, 0244
Proscan 0053
Proton 0157
QED 0157
Quasar 0029
RCA 0179, 0305,
0053, 0764
Realistic 0179, 0420, 0180
Rotel 0157, 0420
SAE 0157
Sansui 0157, 0305
Sanyo 0179
Scott 0305
Sears 0305
Sharp 0037, 0180, 0861
Sherwood 0180
Sony 0000, 0185, 0490
Soundesign 0145
Sylvania 0157
Tascam 0420
Teac 0420, 0393,
0174, 0180
Technics 0029, 0303
Victor 0072
Wards 0157, 0053
Yamaha 0036, 0187
Yorx 0461
Setup Codes
for DVD Players:
Harman/Kardon 0582
JVC 0558
Kenwood 0534
Magnavox 0503
Mitsubishi 0521
Onkyo 0503
Optimus 0525
Panasonic 0490
Philips 0503, 0539
Pioneer 0525, 0571
Proscan 0522
RCA 0522
Samsung 0573
Sony 0533
Technics 0490
Theta Digital 0571
Toshiba 0503
Yamaha 0490, 0545
Zenith 0503, 0591
Setup Codes for
Stereo Tuners
or Receivers:
ADC 0531
Aiwa 0158, 0189,
0121, 0405
Capetronic 0531, 0195
Carver 0189, 0042, 0360
Casio 0195
Clarinette 0195
Curtis Mathes 0039, 0080
Denon 0004
Emerson 0424
Fisher 0042, 0219,
0360, 0801
Garrard 0463, 0424
Harman/Kardon 0110, 0189, 0891
JBL 0110
JVC 0074
Kenwood 0027, 0186, 0042
Koss 0424
LXI 0181
Linn 0189
Lloyd’s 0195
MCS 0039
Magnavox 0531, 0189,
0195, 0391
Marantz 0039, 0189
Modulaire 0195
NAD 0320
Nakamichi 0097
Onkyo 0135
Optimus 0531, 0670, 0186,
0042, 0181, 0219,
0738, 0801, 1023
Panasonic 0039, 0309
Penney 0195
Philips 0189, 0391
Pioneer 0531, 0014, 0150,
0630, 0080, 1023
Proscan 0054
Quasar 0039
RCA 0531, 0054, 0360
Realistic 0195, 0181
Sansui 0189
Sanyo 0219, 0801
Sharp 0186
Sherwood 0491, 0502
Siemens 0424
Sony 0158, 0474
Soundesign 0670
Teac 0463
Technics 0039, 0309
Victor 0074
Wards 0158, 0014, 0189,
0080, 0042, 0054
Yamaha 0176, 0186
Yorx 0195
Zenith 0857
Setup Codes for
Stereo Amplifiers:
Aiwa 0406
Carver 0269
Curtis Mathes 0300
Denon 0160
Harman/Kardon 0892
JVC 0331
Linn 0269
Magnavox 0269
Marantz 0269, 0892
Panasonic 0308
Philips 0269, 0892
Pioneer 0300
Sony 0220, 0689
Technics 0308
Victor 0331
Yamaha 0354
Setup Codes for
DBS Audio Services:
Jerrold 0459, 0520
Scientific Atlanta 0460
Starcom 0459
Setup Codes for
LD Players:
Denon 0059
Mitsubishi 0059
NAD 0059
Pioneer 0059
Sony 0193, 0201
ADDITIONAL INFORMATION
The Catalyst 34 does not have any
user- serviceable parts. Opening the case,
except for the battery cover, may cause
permanent damage to your Catalyst 34.
Copyright 1999 by Universal Electronics,
Inc. No part ofthis publication may be
reproduced, transmitted, transcribed,
stored in any retrieval system, or
translated to any language, in any form
or by any means, electronic, mechanical,
magnetic, optical, manual, or otherwise,
without the prior written permission of
Universal Electronics,Inc.
M34008/99
Manufacturer Codes
Page 3