CDVI RTE-AIR User manual

EN EN
RTE-AIR
Architrave Infrared Touchless Exit Switch
1
Instructions of Use
Quick Start Guide
Power Supply & Connections
A permanent 12-24 VDC supply is required to operate the touchless series of Exit
Buttons.
Product Features & Technical Specications
NO/NC/COM Single pole architrave switch with LED Status
• Sensor: infrared adjustable 3-15cm
• Input Power: 12-24vdc
• Relay Timed: 0.1 sec – 30 sec
• Contact Rating: 24vdc 2A
• Output Contact: Single Pole
NO/NC/COM
• Mechanical Life – 500,000
• IP rating: IP68
• Surface mount
• Operating temperature: -20°C to 55°C
• Operating humidity: 0-95%
• LED Status
Blue = Standby
Green = Activated
WARRANTY
YEAR
2

EN EN
RTE-AIR
Architrave Infrared Touchless Exit Switch
2
For queries visit our website www.cdvi.co.uk or contact us at
[email protected]
[phone]
CDVI UK, Unit B1, Knaves Beech Business Centre, Davies Way,
Loudwater, High Wycombe, HP10 9QR
Adjusting Timer & Activation Distance
The Exit button has a timed output function this is set to 0.3s and can be increased to
30s max.
Relay Time
Turn left for reduced time
Turn right for increased time
Note: DO NOT face the infrared sensor directly into the sunlight, as this will
affect the performance of the unit.
CDVI_RTE-AIR_QS_02_EN_A4_C
VR1
The Exit button has sensitivity adjustment from 3-15cm this can be adjusted as follows:
Activation Distance
Turn left to reduce activation distance
Turn right to increase activation distance
VR2