CDVI RTE-IR Instruction Manual

EN EN
RTE-IR
Infrared Touchles Exit Switch
1
Instructions of Use
Quick Start Guide
Power Supply & Connections
A permanent 12-24 VDC supply is required to operate the RTE-IR & Touchless Series of
Exit Buttons.
Product Features & Technical Specications
NO/NC/COM Single pole switch with LED Status
• Infrared Exit Switch, Touchless sensor
• 304 stainless steel
• Adjustable Sensitivity 3-15cm
• DC12~24V, 2A Contact
• LED Status
Blue = Standby
Green = Activated
• UK back box format
• Surface or ush mount
• Dimensions: 85.5 x 85.5 x 42mm
(1.7mm ush)
• Operating temperature: -20°C to 55°C
• Operating humidity: 0-95%
1.7mm
WARRANTY
YEAR
2

EN EN
RTE-IR
Infrared Touchles Exit Switch
2
For queries visit our website www.cdvi.co.uk or contact us at
[email protected]
[phone]
CDVI UK, Unit B1, Knaves Beech Business Centre, Davies Way,
Loudwater, High Wycombe, HP10 9QR
Adjusting the Activation Distance
You can adjust the activation distance of the IR Exit button from 3-15cm. The distance
is adjusted by turning the POT in the direction required for shorter (3cm) or longer
(15cm) activation, as shown below:
Adjustment POT
Turn left to increase the activation distance
Turn right to reduce the activation distance
Note: DO NOT face the infrared sensor directly into the sunlight, as this will
affect the performance of the unit.
CDVI_RTE-IR_QS_02_EN_A4_C