CEL-FI GO Mobile User manual

For more information, visit: www.cel-.com
Cel-Fi GO Mobile
Quick Start Guide
Smart Signal Repeater
Cel-Fi GO Mobile is an evolved cellular smart
signal repeater design that can amplify cellular
signals up to 100dB. Connect a single Donor
Antenna to receive the macro-network signals,
and then a single indoor Service Antenna
where you need service, and Cel‑Fi GO will do
the rest automatically.
IN THE BOX
• Quick Start Guide
• Smart Signal Booster
• Power Supply
• Legal Insert
Copyright © 2019 by Nextivity, Inc, U.S. Patents pending. All rights reserved. The
Nextivity and Cel-Fi logos are registered trademarks of Nextivity Inc. All other
trademarks or registered trademarks listed belong to their respective owners.
Designed by Nextivity Inc in California. qsg_go-mobile-pt-aus_19-1106
7Tips & Tricks
• Keep Donor and Service Antennas separated/isolated
from each other for best performance
• For best performance, the cable between the Donor
Antenna and GO unit should be as short as possible
• Use sealant if any connections are exposed to elements
8Cel-Fi WAVE
For more Cel‑Fi GO features, go to App Store or Google
play and download the mobile Cel‑Fi WAVE app.
(NOTE: If you do not have a compatible smartphone,
go to cel-.com/wave to download the Desktop app.)
NETWORK STRENGTH
The Cel-Fi WAVE app can help you
optimize your system’s performance.
Cel-Fi GO Mobile Smart Signal Repeater www.cel-.com
Press the MODE button on the unit to select desired scanning
mode. Status Indicator will blink during the setup process,
and may take a few minutes to complete.
(OPTIONAL: use your smartphone to select mode.
Download the Cel‑Fi WAVE app, and follow the on-screen
instructions.)
NETWORK STRENGTH
6Plug in Cel-Fi GO & Select Mode
SERVICE ANTENNA
12V POWER
SUPPLY
DONOR ANTENNA
CEL-FI GO
(*NOTE: if Error, go to troubleshooting at cel-.com/support)
AUTO
3G
4G LTE
MODE
SELECT
BUTTON
MODE
STATUS
INDICATOR
AUTO
3G
4G/4GX
MODE
SELECT
BUTTON
MODE
STATUS
INDICATOR
STATUS INDICATOR
LEGEND
Boosting 3G
Boosting 4G LTE
Error*
STATUS INDICATOR
LEGEND
Boosting 3G
Boosting 4G/4GX
Error*
4G LTE
4G/4GX
...CONTINUED

If your unit has a 12V CLA with a grounding tab on the
end, then:
(1) attach that tab to the grounding
post* on the Cel-Fi GO prior to
attaching to power.
(2) Use the nut (included)
(3) to secure the tab to the unit.
* If your Cel‑Fi GO unit does not include a grounding post,
simply attach the grounding tab to any available ground
source.
GROUNDING
TAB
12V CLA
1
3
Install Service Antenna
2
For best performance make sure
there is 50cm of metal around the
base of the antenna.
Mount your Donor Antenna on the exterior of the
vehicle, towards the rear, according to its design, and
the type of vehicle it’s being used with. Make sure you
consider the cable connection to the Cel‑Fi GO unit
with your location choice.
Install Service Antenna in the cab, towards the front,
where coverage is needed. Ideally, there should be
substantial material, like the metal of the roof, between
the Donor and Service Antennas, to improve isolation.
DONOR ANTENNA
Install Donor Antenna
I
SERVICE ANTENNA
SERVICE ANTENNA
SERVICE ANTENNA
DONOR ANTENNA
Cel-Fi GO Mobile Installation
3Mount Cel-Fi GO
Find a good mounting location in your vehicle. Location
should have airow and be secure from contact with
external objects.
Make sure the unit is within cable range of the 12V power
supply on your vehicle.
Best to make sure all cable lengths support the intended
mounting location BEFORE permanent mounting.
DO NOT plug in at this time.
CEL-FI GO
CEL-FI GO
4Connect Donor & Service Antennas
to the Cel-Fi GO Unit
LEFT SIDE: Service Antenna
Connector
RIGHT SIDE: Donor Antenna
Connector
DONOR ANTENNA
DONOR ANTENNA
TOP VIEW
STATUS
INDICATOR
MODE
5Ground the Cel-Fi GO
Cel-Fi GO Mobile Smart Signal Repeater www.cel-.com
CEL-FI GO OPTIONAL
LOCATION
TOP
NUT BOTTOM
NUT
2
CONTINUED...