celadon BW7070 Parts list manual

Celadon, Inc.
TRX Series
Infrared Remote and Receiver
Assembly and Operation
Instruction Manual
ADDENDUM
For using the BW7070 Infrared Remote Control with the BW0006 Receiver
REV 2.1 Addendum COPYRIGHT 2000

1. Introduction
This addendum is supplemental instructions for operating the BW-7070
Infrared Remote with the BW-0006 Infrared Receiver.
4.2 Operation
•Insert new batteries in the battery compartment
•Place the receiver so that you can directly aim at the
receiver’s IR module at a distance of 50 feet or less
•Apply power to the remote control receiver (Vdd is +5v, Vss is
GND)
•The BW-7070 Infrared Remote has 5 buttons that will function
with the BW-0006 Infrared Receiver. These buttons are: 3, 4,
7, 9, and 10. SEE DIAGRAM BELOW FOR KEY NUMBERING LAYOUT
Key No. Location
BW-7070

For BW-7070
SYSTEM CODE '01010110'
Remote key no., Tx'er data & Data output form decoder table
1) Remote Key No. 2) Data output from the BW-0006
IC
(K5....K0)
03 000100
04 000011
07 111010
09 000101
10 111100
Note: In column no 2), Data ‘0’ stands for output LOW, Data ‘1’
stands for output HIGH.
Connector (Con 0) Configuration
Pin Description of U1 Pin Description of U1
1K0 8K7
2K1 9LATCH
3 K2 10 STATUS
4K3 11VSS
5K4 12VDD
6 K5 13 N.C.
7 K6 14 N.C.
Note:
Pin 1-8: Data Output
Pin 9 : LATCH signal which strobes when data is ready on the data
output lines
Pin 10 : STATUS signal flashes for any valid code received.

Celadon, Inc.
500 Tamal Plaza, Suite 520
Corte Madera, CA 94925
Sales Tel: [phone] x201
Fax: [phone]
Main Tel: [phone]