celesco MT150 User manual

common
+out
regulated DC supply
(20 volts max.)
–
+
(black)
(red)
(green)
red
green
black
celesco.com
v1.0
MT150 Installation Guide
Voltage Divider / 5k ohms Mounting Dimensions
specication summary Eyelet Option Leader Cable Option Mounting Hole Options
General
Stroke Range: 1.5 inches
Output Signal: voltage divider (potentiometer)
Accuracy: 1% fs.
Measuring Cable: 0.014-in. dia. nylon-coated stainless
Measuring Cable Tension: 4 oz. ±25%
Enclosure: anodized aluminum
Sensor: conductive plastic precision potentiometer
Potentiometer Cycle Life: ≥ 5 million cylcles
Electrical
Resolution: essentially innite
Sensitivity: 897 - 924 mV/V
Input Resistance: 5K ohms, ±10%
Recommended Output Current: <1 µA
Recommended Maximum Input Voltage: 20 Vdc
Environmental
Enclosure: NEMA 12, IP50
Operating Temp: -40° to -185°F (-40° to 85°C)
Temp. Coe. of Sensing Element: .0028%/°F (.005%/°C)
M150 Specs: celesco.com/_datasheets/m150.pdf
5K Ω
+in
common+out
.74”
Eyelet Detail
18-inch, 30 gauge multiconductor cable
.740 [18,8]
.188 [4,78]
.095 [2,41]
.570 [14,48]
.570 [14,48]
Ø.125 [3,18]
Ø.250 [6,35]
.375 ± .02
[9,53 ± 0,05]
.740 [18,8]
15º ±15º
units are in inches [mm]
tolerances are ±0.010 inches [±0,25 mm] unless specied otherwise.
1.06 ± .03 in.
26,9 ± 0,75 mm
.981 ± .03 in.
24,9 ± 0,75 mm
.553 ± .03 in.
14,22 ± 0,75 mm
.062 [1,57]
mounting holes (2 plcs.)
#2-56 threaded or .093 inch dia.
thru option (see datasheet)
see detail
24-inch leader cable
1 - eyelet 5 - crimps
crimp*
*note: crimped stop prevents leader cable
from retracting into sensor body
included: {
*–includes:
4) #2-56 x 3/8” pan head mounting screws with washers
.093 ±.010 in.
2,36 ±0,25 mm
dia. thru
#2-56 threaded
Thru Hole Threaded Hole*

common
+out
regulated DC supply
(20 volts max.)
–
+
(black)
(red)
(green)
red
green
black
celesco.com
v1.0
MT150 Installation Guide
Voltage Divider / 5k ohms Mounting Dimensions
specication summary Eyelet Option Leader Cable Option Mounting Hole Options
General
Stroke Range: 1.5 inches
Output Signal: voltage divider (potentiometer)
Accuracy: 1% fs.
Measuring Cable: 0.014-in. dia. nylon-coated stainless
Measuring Cable Tension: 4 oz. ±25%
Enclosure: anodized aluminum
Sensor: conductive plastic precision potentiometer
Potentiometer Cycle Life: ≥ 5 million cylcles
Electrical
Resolution: essentially innite
Sensitivity: 897 - 924 mV/V
Input Resistance: 5K ohms, ±10%
Recommended Output Current: <1 µA
Recommended Maximum Input Voltage: 20 Vdc
Environmental
Enclosure: NEMA 12, IP50
Operating Temp: -40° to -185°F (-40° to 85°C)
Temp. Coe. of Sensing Element: .0028%/°F (.005%/°C)
M150 Specs: celesco.com/_datasheets/m150.pdf
5K Ω
+in
common+out
.74”
Eyelet Detail
18-inch, 30 gauge multiconductor cable
.740 [18,8]
.188 [4,78]
.095 [2,41]
.570 [14,48]
.570 [14,48]
Ø.125 [3,18]
Ø.250 [6,35]
.375 ± .02
[9,53 ± 0,05]
.740 [18,8]
15º ±15º
units are in inches [mm]
tolerances are ±0.010 inches [±0,25 mm] unless specied otherwise.
1.06 ± .03 in.
26,9 ± 0,75 mm
.981 ± .03 in.
24,9 ± 0,75 mm
.553 ± .03 in.
14,22 ± 0,75 mm
.062 [1,57]
mounting holes (2 plcs.)
#2-56 threaded or .093 inch dia.
thru option (see datasheet)
see detail
24-inch leader cable
1 - eyelet 5 - crimps
crimp*
*note: crimped stop prevents leader cable
from retracting into sensor body
included: {
*–includes:
4) #2-56 x 3/8” pan head mounting screws with washers
.093 ±.010 in.
2,36 ±0,25 mm
dia. thru
#2-56 threaded
Thru Hole Threaded Hole*