Celexon Economy LP100 User manual

celexon Laser presenter Economy LP100
User guide
celexon Laser presenter Economy
LP100
Thank you for purchasing this product from celexon.
Please read the user guide carefully and keep for
future reference.

celexon Laser presenter Economy LP100
WARNING - RISK OF INJURY!
Laser product class 2M
According to DIN EN 60825-1
Wavelength 650nm
Laser power <1 mW
Laser beams can cause permanent eye
damage. Do not look into the laser beam
and do not direct it at other people or
animals. Keep this device away from
children. This is a working tool and not a
toy and should only be used by adults.
Any use other than that described in this
manual is not permitted and will invalidate
the warranty.
The information in this document is
subject to change without notice. No part
of this document may be reproduced or
transmitted in any form or by any means
without the prior consent of the
manufacturer.
The manufacturer assumes no liability for
damage and / or injuries caused by
improper use.

celexon Laser presenter Economy LP100
Introduction
I. Key features
1) Supports PowerPoint, Keynote and
Prezi
2) Thanks to the ISM-free 2.4GHz
frequency, this presenter can be used
worldwide without restrictions
3) The omnidirectional emitter allows the
control of devices in other rooms
4) A transmitter can control up to 6 USB
receivers
5) Supports the following functions:
Page up / down, full screen, black
screen
6) The LED flashes when battery is low
7) The receiver can be inserted into the
presenter's housing
8) Safe laser class according to
EN60825-1
9) Compatible with USB3.0, plug and
play
10)Energy-saving with auto standby and
on / off switch
11)Power supply via an AAA battery

celexon Laser presenter Economy LP100
Supported Operating Systems
Windows 7, Windows 8, Windows 10,
Mac OS, Linux, Android 4.3 and later
In the box
1) Laser Presenter Economy LP100
2) AAA battery
3) User guide
Technical spec
Transmitter
Technology: Radio frequency
Frequency: 2.4GHz
Range control: >100m
Laser: Class 2M
Laser power: <1mW
Laser distance: > 200m
Wavelength: 650nm
Battery: 1 x AAA
Operating Voltage: 1.5V
Weight: 18.6g
Dimensions: 138.8x17.6x15mm
USB receiver
USB version: USB 2.0
Operating voltage: 5V DC
Dimensions: 24.7x13.8x5.2 mm
Weight: 1.6g

celexon Laser presenter Economy LP100
II. Functions - overview

celexon Laser presenter Economy LP100
Functions
1) To use the laser pointer on, press and
hold the ‘laser pointer’ button
2) Press the ‘page up’ button for 2
seconds to view the current slide. If
the button is held for another 2
seconds, the slide will appear in full
screen mode.
3) Press the ‘page up’ button to move to
the next slide during the presentation.
The ‘page down’ takes you back to
the previous slide.
4) To pause the presentation with a
black screen, hold the ‘page down’
button for 2 seconds. If held for
another 2 seconds, the presentation
will continue with the following slide.
5) The LP100 supports PowerPoint,
Keynote and Prezi. The presentation
mode can be changed simultaneously
pressing the ‘page up / page down’
buttons. By default, the up and down
buttons on the LP100 have the same
function as the up and down arrows
on your keyboard (PowerPoint /
Keynote). If you press the up and
down buttons simultaneously, they
function as left and right arrows when
using Prezi. When pressed 3 times,
the LP100 goes back to its default
settings.

celexon Laser presenter Economy LP100
Installation
1) Insert the battery
2) Remove the mini USB receiver
3) Insert the USB receiver into a USB
port

celexon Laser presenter Economy LP100
Operating systems such as Windows,
Android and Linux automatically install
the driver for the USB receiver.
4) After the installation, the presenter
can be used. The blue LED will flash
with each press of a button.
5) To switch the presenter off, use the
switch on the side.
6) If the LED flashes slowly, the battery
is empty and needs to be replaced

celexon Laser presenter Economy LP100
FAQs
1. How do I know that the battery is
low?
Turn on the presenter. When the LED
flashes slowly, the battery is empty and
needs to be replaced
2. Why does the laser pointer not
work?
Check whether Presenter is switched on.
If the LED flashes slowly, it means that
the power is low and the battery needs to
be replaced.
III. certificates
CE, ROHS, FDA ,FCC