Celluon PicoBit User manual

User Manual

2
Table of Contents
Product Features .............................................................. 3
Using Touchpad................................................................ 3
Product Mode ................................................................... 4
Charging the Device ......................................................... 5
PicoBit Main Menu............................................................ 6
Connection Methods......................................................... 6
Screen Mirroring ...................................................................................... 6
Air Pico..................................................................................................... 7
HDMI........................................................................................................ 8
DLNA ....................................................................................................... 8
Micro SD Card .......................................................................................... 9
Internet.................................................................................................. 10
Bluetooth ............................................................................................... 10
Android Settings............................................................. 11
Projector Settings .......................................................... 11
Keystone Adjustment ............................................................................ 11
Screen Rotation ..................................................................................... 12
Screen Setting ....................................................................................... 12
Laser Alignment..................................................................................... 13
Bi-Phase Adjustment ............................................................................. 13
Pico Reset .............................................................................................. 13
Specifications ................................................................. 14
Safety Precautions ......................................................... 14
Product Certifications..................................................... 15
FCC Compliance Information................................................................. 15
FCC Class Notice .................................................................................... 15
FCC Caution............................................................................................ 15
FCC RF Radiation Exposure Statement:................................................. 15
Industry Canada Statement .................................................................. 15
CE Class Notice ...................................................................................... 16
CE Caution.............................................................................................. 16
IEC-60825-1 Caution ............................................................................. 16
The MIT License (MIT)........................................................................... 16
Warranty ........................................................................ 16

3
Product Features Using Touchpad
For your safety, do not point the laser light directly into eyes or people. Doing so may
cause serious injuries.
Volume Down
Projection Aperture
Volume Up
Touchpad
Micro SD Card
Power
Micro HDMI
Speaker USB Type-C Charging Port
3.5 mm Audio Jack
The top surface of PicoBit is touchpad. When PicoBit is fully loaded, cursor will appear
on the screen for users to control using this touchpad.
1
2
1Tap these icons to increase and decrease volume.
2Freely navigate the screen using a finger - this area recognizes your finger
movement as cursor movement on the screen.

4
• Left click – Tap once • To go back or cancel – Tap once
with two fingers
• Scroll – Tap once and hold down
with two fingers. Without releasing
the fingers, scroll up and down.
• Zoom in & out – Using two
fingers, pinch in to zoom out and
pinch out to zoom in.
• Drag – Tap once and hold down.
Without releasing the finger, slide
finger in any direction to drag.
Release finger on desired area.
Product Mode
1 LED Indicator - Different colors of LED indicators located below touchpad
represent status of the PicoBit.
• Solid Blue – PicoBit is powered on
• Blinking Blue – In Sleep Mode
• Green – Fully charged
• Red – Charging
2 Power On – Press power switch for 3 seconds.
3 Power Off – Press power switch for 6 seconds. After 3 seconds, power menu
will be displayed. Continue to press it for another 3 seconds, and the product will
power off.
4 Power Menu – While product is turned on, press power switch for 3 seconds
to see the Power menu (Power off or Restart option). This menu does not show
during HDMI or WiFi Display mode.
5 Sleep Mode – When PicoBit is in Sleep Mode (or Power Save Mode), laser
projection is turned off while product is still powered on. To enter Sleep Mode,
lightly press the power button once. To wake up Sleep Mode, press the power
button shortly again and PicoBit will display the image shown before entering the
Sleep Mode.
6 APC (Auto Power Control) Setting – This setting is to efficiently control the
amount of light emitting from PicoBit’s laser diodes. Due to this setting, a thin
white line on the top of the screen will always be present when PicoBit is turned
on.

5
Charging the Device
Battery Operating Time: Approx. 2.5 hours
Battery Charging Time: 4-5 hours
To charge PicoBit : Use the supplied USB Type-C cable and power adapter to charge
the device.
Please note that using other adapters than the one provided may result in longer
charging times or damage to the internal battery.
IMPORTANT!
It is not recommended to use PicoBit continuously for more than 4-5
hours or continuously charge for a long period of time. Due to the
structure of the projection module, heat problem with module may occur
if PicoBit is continuously played or charged for a long period of time.
Please cool off the device by turning it off after playing it for 4-5 hours.
Environmentally Friendly Disposal and Recycling
To protect the environment, dispose this product separately
from household waste once it has reached its end of life, or
take it to your local electronic waste disposal center.
Built-in Battery Specification
Battery Type Rechargeable Lithium-ion Polymer Battery
Battery Operating Time Approx. 2.5 hours (with continuous use)
Battery Capacity 3500 mAh @ 3.8 V
Charging the Battery Use supplied cable and power adapter to charge the battery.
(Green LED – Fully Charged / Red LED – Charging)
Battery Charging Time Approx. 4 – 5 hours

6
PicoBit Main Menu
1 2 3 4 5 6
1Power Menu To power off or restart the device
2Volume Control To decrease volume
3Back To go back to the previous page
4Home To go back to the main menu
5Task Manager To manage applications running on PicoBit
6Volume Control To increase volume
Connection Methods
Screen Mirroring
(WiFi Display / Smart View / Screen Sharing / Media Output)
• On the default menu screen, select “WiFi Display” icon to enter WiFi Display mode.
• On a mobile device, find and select Screen Mirroring feature (WiFi Display / Smart
View / Screen Sharing / Media Output).
Note
Wireless display feature is called different names on different devices.
( i.e. Samsung device = Smart View / Screen Mirroring, LG device = Screen
Sharing, etc.)

7
• When device discovers “Android_XXXX”, tap to connect.
• PicoBit will start mirroring display upon successful connection.
Air Pico
• PicoBit and the desired iOS device must be connected to the same WiFi network
for this feature (If there is no WiFi network available, use iOS device’s hotspot to
connect PicoBit’s WiFi to the device).
• After checking both devices are connected to the same WiFi network, select “Air
Pico” icon on the default menu screen to enter the Air Pico mode.
• Below image will be displayed upon entering Air Pico mode.
• Follow instructions on screen: On your iOS device, pull up the task bar from the
bottom of screen and select AirPlay.
• Select “PICOBIT-XXXXX” and turn on “Mirroring” option.
• PicoBit will start mirroring display upon successful connection.

8
HDMI
• On the default menu screen, select “HDMI” icon to enter wired connection mode.
• For HDMI connection, use Micro HDMI to HDMI cable (sold separately) to connect
PicoBit with the device.
• You may tap touchpad with two fingers or disconnect cable connection to exit HDMI
mode during usage.
Note
During HDMI connection, it is recommended to use 3.5mm audio jack to
connect to an external speaker (Bluetooth speaker is not recommended).
DLNA
Desired mobile device must have applicable DLNA app installed and running.
(Ex. ArkMC, BubblePnP, etc.)
1 Go to “Apps” icon on the default menu screen, then find “Settings” icon to
check connected WiFi on PicoBit.
2 Connect to that same WiFi network on a mobile device.
3 After verifying that PicoBit and the mobile device are connected to the same
network, select “Apps” icon on the main menu.
4 Find and select “eHomeMediaCenter” app to enter DLNA mode.

9
5 Go to the mobile device you wish to connect, and open up DLNA app
(ex. ArkMc DLNA).
6 On PicoBit, select the “Media Player” option to see the list of saved media
contents in connected mobile device.
7 Select your device.
8 Find an image or a video to play through PicoBit (Files saved on Micro SD card
will be not discovered).
Micro SD Card
• Insert Micro SD card.
• To enjoy videos or movies stored on Micro SD card, select “Video” icon on the
default menu.
• Browse through and select a video to play through PicoBit.
• To share images stored in the SD card, select “Gallery” icon on the default menu.
• Browse through and select an image to display through PicoBit.

10
Internet
1 To connect to WiFi network, select “Apps” icon on the default menu.
2 Find and select “Settings” app.
3 Go to WiFi option and connect to available WiFi network.
4 On the default menu screen, select “Internet” icon to use internet browser.
5 Freely use the web to do web surfing, streaming, etc.
Bluetooth
• To connect a Bluetooth device to PicoBit, select “Apps” icon on the default menu.
• Find and select “Settings” app.
• Go to Bluetooth option and turn on Bluetooth.
• Find and connect desired Bluetooth device (Bluetooth mouse, speaker, headset, etc)
to PicoBit.