NEC NP-NC2402ML User manual

User’s Manual
DLP Cinema®Projector Head
NP-02HD
Light Module
NP-24LU01/NP-20LU01/NP-18LU01
DLP Cinema®Projector
NP-NC2402ML/NP-NC2002ML/
NP-NC1802ML
DLP Cinema®Projector
Model No. (Some models are not available for sales in certainregions.)
NP-02HD/NP-NC2402ML/NP-NC2002ML/NP-NC1802ML
NP-24LU01 / NP-20LU01 / NP-18LU01

2
Important Information
Precautions: Please read this manual carefully before
using your NP-02HD/NP-NC2402ML/NP-NC2002ML/
NP-NC1802ML and keep the manual handy for future ref-
erence. The NP-02HD (projector head) is called the “projec-
tor” in this manual.
• DLP (Digital Light Processing), DLP Cinema and DLP
Cinema logo are trademarks of Texas Instruments.
• Microsoft, Windows and Internet Explorer are either reg-
istered trademarks or trademarks of Microsoft Corporation
in the United States and/or other countries.
• Mozilla and Firefox are either registered trademarks or
trademarks of the Mozilla Foundation in the United States
and/or other countries.
• Oracle and Java are registered trademarks of Oracle
and/or its affiliates.
• Linux is a registered trademark of Linus Torvalds in the
United States and/or other countries.
• Other product names and logos mentioned in the user’s
manual may be the trademarks or registered trademarks
of their respective holders.
• The display screens and illustrations shown in this man-
ual may differ slightly from the actual ones.
• GPL/LGPL Software Licenses
• The product includes software licensed under GNU
• General Public License (GPL), GNU Lesser General
Public License (LGPL), and others.
• For more information on each software, see “readme.pdf”
inside the “about GPL&LGPL” folder on the supplied
CD-ROM.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION
TO PREVENT ELECTRIC SHOCK, DO NOT OPEN TOP
COVER. NO USER SERVICEABLE PARTS INSIDE.
This symbol warns the user that uninsulated
voltage within the unit may have sufficient
magnitude to cause electric shock.Therefore,
it is dangerous to make any kind of contact
with any part inside of this unit.
This symbol alerts the user that important lit-
erature concerning the operation and mainte-
nance of this unit has been included.Therefore,
it should be read carefully in order to avoid any
problems.
Laser Safety Caution
This product is classied as Class 1 of IEC 60825-1 Third
edition 2014. This product is classied as RG3 of IEC/EN
62471-5 First edition 2015.
This product is classied as RG3 of IEC 62471:2006.(for
USA). Obey the laws and regulations of your country in rela-
tion to the installation and management of the device.
CAUTION
Use of controls or adjustments of procedures other than
those specied herein may lead to hazardous laser radi-
ation exposure.
• Hazardous optical radiation is emitted from this product,
RG3 IEC 62471:2006. (for USA).
• No direct exposure to the beam shall be permitted, RG3
IEC/EN 62471-5:2015.
• Operators shall control access to the beam within the
hazard distance or install the product at the height that
will prevent spectators’ eyes from being in the hazard
distance.
• Do not look at operating light source. Eye injury may
result, RG3 IEC 62471:2006. (for USA)
• No direct exposure to beam shall be permitted, RG3 IEC
62471:2006. (for USA).
• Not for household use, RG3 IEC 62471:2006. (for USA)
• This projector must be installed high enough to provide
clearance for people who may walk beneath the beam
path or hazard distance, RG3 IEC 62471:2006. (for USA)
• Direct exposure of human eyes to beam is prohibited.
• The following graphic symbol indicating that looking into
the projector is prohibited is displayed on the projector
cabinet.
• Do not look at the projected light using optical devices
(magnifying glasses, reectors, etc.). Doing so could
result in vision impairment.
• When performing the lens shift adjustment, make sure
that you are behind or beside the projector. Doing so from
the front of the projector may cause intense light to enter
into your eyes, resulting in damage to them.
• This projector, which is an RG3 product, is for business
use and must be installed in location where safety is
assured. For this reason, installation of the projector and
mounting and removal of the lens unit must be performed
by professional service personnel. To do the works, be
sure to consult your dealer. NEVER install the projector
by end users. Doing so may cause visual impairment and
other injuries.
• Keep any items such as magnifying glass out of the light
path of the projector. The light being projected from the
lens is extensive, therefore any kind of abnormal objects
that can redirect light coming out of the lens, can cause
unpredictable outcome such as re or injury to the eyes.
• When turning on the projector, ensure that nobody is fac-
ing towards the lens in the path of the light emitted from
the laser.
• This product can only be operated in theaters by specied
personnel. Customers should not operate this product.
Machine Noise Information Regulation - 3. GPSGV,
The highest sound pressure level is less than 70 dB (A) in
accordance with EN ISO 7779.
WARNING
This equipment is compliant with Class A of CISPR 32.
In a residential environment this equipment may cause
radio interference.

3
Important Information
FCC Information (for USA only)
WARNING
• The Federal Communications Commission does not
allow any modications or changes to the unit
EXCEPT those specied by NEC Display Solutions of
America, Inc. in this manual. Failure to comply with
this government regulation could void your right to
operate this equipment.
• This equipment has been tested and found to comply
with the limits for a class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruc-
tion manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference
in which case the user will be required to correct the
interference at his own expense.
Supplier’s declaration of conformity (for USA only)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions.
(1) This device may not cause harmful inter-
ference, and (2) this device must accept any
interference received, including interference
that may cause undesired operation.
U.S. Responsible
Party:
NEC Display Solutions of America, Inc.
Address: 3250 Lacey Rd, Ste 500
Downers Grove, IL 60515
Telephone Number: 630-467-3000
Type of Product: Projector
Equipment
Classication:
Class A Peripheral
Model Number: NP-02HD/NP-NC2402ML/
NP-NC2002ML/NP-NC1802ML
WARNING
THE END USER IS NOT ALLOWED TO OPEN OR
MODIFY THE PRODUCT.
NO USER SERVICEABLE PARTS.
MAINTAIN AND SERVICE OF THE PRODUCT IS ONLY
TO BE HANDLED BY NEC AUTHORIZED TECHNICIANS.
Important Safeguards
These safety instructions are to ensure the long life of your
projector and to prevent re and shock. Please read them
carefully and heed all warnings.
Installation
1. Do not point the projection beam toward other people or
reective objects.
2. Consult your dealer for information about transporting
and installing the projector. Do not attempt to transport
and install the projector yourself.
The projector must be installed by qualied technicians
in order to ensure proper operation and reduce the risk
of bodily injury.
3. Place the projector on a at, level surface in a dry area
away from dust and moisture. Tilting the front of the pro-
jector up or down from level could reduce laser life.
Do not put the projector on its side when the laser is on.
Doing so may cause damage to the projector.
4. Do not place the projector in direct sunlight, near heaters
or heat radiating appliances.
5. Exposure to direct sunlight, smoke or steam could harm
internal components.
6. Handle your projector carefully. Dropping or jarring your
projector could damage internal components.
7. When moving the projector, be sure to remove the lens
from the projector before moving it.
8. To carry the projector, a minimum of six persons are
required.
9. Do not hold the lens part with your hand. Otherwise the
projector may tumble or drop, causing personal injury.
10.Do not place heavy objects on top of the projector.
11. Turn off the projector, and disconnect the power cable
before moving the projector.
For C2 connection, turn off the projector, shut down the
AC power to the projector and the light using a
circuitbreaker.
Disconnect the cables between devices and the light
before moving the projector.
12.The cooling fan settings need to be congured when
using the projector in a location at an altitude of approxi-
mately 5500 feet/1600 meters or higher. Consult your
dealer in advance.
13.Turn off the projector when removing and installing
lenses. Failure to do so can cause loss of vision.
For mounting or replacing the lens, please contact your
dealer.
14.Do not install and store the projector in the below
circumstances.
Failure to do so may cause of malfunction.
• Inpowerfulmagneticelds
• Incorrosivegasenvironment
• Outdoors
15.If you wish to have the projector installed on the ceiling;
• Donotattempttoinstalltheprojectoryourself.
• Theprojectormustbeinstalledbyqualiedtechni-
cians in order to ensure proper operation and reduce
the risk of bodily injury.
• Inaddition,theceilingmustbestrongenoughtosup-
port the projector and the installation must be in
accordance with any local building codes.
• Pleaseconsultyourdealerformoreinformation.
16.When moving the projector, check the following:
• Thattheprojectoristurnedoff,thepowerplugisdis-
connected from the outlet
• Thattheconnectorcablethatconnectsthedeviceto
the projector is unplugged

4
Important Information
WARNING
1. Do not cover the lens with the supplied lens cap or
equivalent while the projector is on. Doing so can
lead to distorting or melting of the cap and burning
your hands due to the heat emitted from the light
output.
2. Do not place any objects, which are easily affected by
heat, in front of the projector lens. Doing so could
lead to the object melting from the heat that is emitted
from the light output.
The following graphic symbol is shown on the projec-
tor cabinet.
When using the projector tilted in the forward or backward
direction, use it in the range of (+15° to -15°) from horizontal.
If you tilt it outside of this range or tilt it to the left or right, it
may become damaged.
If the projector is tilted outside of this range when used tilted
in the forward or backward direction, “TiltDegreeOver” is
displayed on the LCD screen. If this message appears,
change the installation of the projector so that the angle is
within the given range from horizontal.
When installed on a oor or a desktop

CAUTION
This equipment is not suitable for use in locations where
children are likely to be present
Power Supply
1. Consult your dealer for installing the power cable to the
projector. DO NOT install the power cable by yourself.
Doing so may cause a re or electric shock.
The projector is so designed that it operates with the
power supply voltage described below.
For C1 connection
(When the AC power to the projector power supply and
the light power supply is provided by a single cable)
• AC200V-240Vsinglephase50/60Hz
For C2 connection
(When the AC power to the projector power supply
and the light power supply is provided by separate
cables)
• AC100V-240Vsinglephase50/60Hz(projector
power supply)
• AC200V-240Vsinglephase50/60Hz(lightpower
supply)
Ensure that your power supply ts this requirement
before attempting to use your projector.
2. The power cable is not included with the projector. Ask
your dealer for the power cable to select and purchase.
Use a power cable that meets the standards and power
supply voltage of the country where you are using the
projector.
Refer to “2-2. Connecting the Power Cable” (page 26) for
details on connecting the power cable.
3. Handle the power cable carefully. A damaged or frayed
power cable can cause electric shock or re.
• Donotbendortugthepowercableexcessively.
• Donotplacethepowercableundertheprojector,or
any heavy object.
• Donotcoverthepowercablewithothersoftmateri-
als such as rugs.
• Donotheatthepowercable.
• Do not change the arrangement of the installed
power cable.
4. If the projector will not be used for an extended period of
time, turn off the projector, and disconnect the power
plug from the outlet.
5. Placing the power cable and the signal cable closely to
each other can cause beat noise. If this happens, keep
the two separated so that beat noise is not generated.
Beat noise is corruption of the picture often seen as a
rolling band moving through the image.
6. Do not touch the projector during a thunder storm. Doing
so can cause electrical shock or re.
7. When installed on the ceiling, install the breaker in a
location that is easy to reach by hand.
Fire and Shock Precautions
1. Ensure that there is sufficient ventilation and that vents
are unobstructed to prevent potentially dangerous con-
centrations of ozone and the build-up of heat inside your
projector. Allow at least 24 inches (60 cm) of space
between your projector and a wall. In particular, clear a
space of 26.7 inches (70 cm) or more in front of the air
outlet on the rear surface and 12 inches (30 cm) or more
on the upper part of the projecter body.
2. Prevent foreign objects such as paper clips and bits of
paper from falling into your projector. Do not attempt to
retrieve any objects that might fall into your projector. Do
not insert any metal objects such as a wire or screw-
driver into your projector. If something should fall into
your projector, shut down the AC power to the projector
immediately and have the object removed by a qualied
service person.
For C2 connection, turn off the projector, shut down the
AC power to the projector and the light using a circuit
breaker, and contact your dealer/distributor.
3. Turn off the projector, shut down AC power by using a
circuit breaker and contact qualied service personnel
under the following conditions. For C2 connection, turn
off the projector, shut down the AC power to the projector
and the light using a circuit breaker, and contact your
dealer/distributor for a repair.
• Whenthepowercableorplugisdamagedorfrayed.
• Ifliquidhasbeenspilledintotheprojector,orifithas
been exposed to rain or water.

5
• Iftheprojectordoesnotoperatenormallywhenyou
follow the instructions described in this user’s
manual.
• Iftheprojectorhasbeendroppedorthecabinethas
been damaged.
• If the projector exhibits a distinct change in perfor-
mance, indicating a need for service.
4. Keep any items such as magnifying glass out of the light
path of the projector. The light being projected from the
lens is extensive, therefore any kind of abnormal objects
that can redirect light coming out of the lens, can cause
unpredictable outcome such as re or injury to the eyes.
5. Never remove or open the projector cabinet and never
modify the projector. Otherwise, re, electric shock, or
leakage of laser light may cause visual impairment or
burn injuries.
6. When using a LAN cable:
For safety, do not connect to the connector for peripheral
device wiring that might have excessive Voltage.
7. Do not try to touch the air outlets on the projector during
normal projector operation as it is hot.
Cleaning
1. Shut down AC power by using a circuit breaker before
cleaning.
For C2 connection, turn off the projector, shut down the
AC power to the projector and the light using a circuit
breaker.
2. Clean the cabinet periodically with a cloth. If heavily
soiled, use a mild detergent. Never use strong deter-
gents or solvents such as alcohol or thinner.
3. Use a blower or lens paper to clean the lens, and be
careful not to scratch or mar the lens.
4. Do not handle the projector and the power cable with wet
hands. Doing so can cause electrical shock or re.
CAUTION
1. Do not shut down AC power to the projector under
the following conditions. Doing so can damage the
projector.
• Whileprojectingimages
• Whilecoolingafterthepoweristurnedoff.
(The STATUS indicator LED blinks in orange while
the fan is rotating, and “cooling...” is displayed on
the LCD screen. )
- When using the IMB: 90 seconds
• During IMB Operation (if the projector is not in
standby state)
2. Do not turn of the AC power for 90 seconds after the
Laser is turned on and while the POWER indicator is
blinking green. Doing so could cause premature
Laser failure.
3. Keep hands away from the lens mounting portion
while the lens shift is in operation. Failure to do so
could result in ngers being pinched between the
cabinet and lens cover.
4. When main body is damaged, cooling uids may
come out of internal part.
Should this happen, immediately turn off the AC sup-
ply to the projector and contact your dealer.
DO NOT touch and drink the cooling uid.
When the cooling uids are swallowed or contacted
with your eyes, please consult with doctors
immediately.
Important Information
Caution on Carrying the Projector/Handling the
Optional Lens
The projector should always be carried by at least 6 people,
holding the handles on the front and back of the main body
and the grips on the bottom. Remove the lens unit from the
projector body when moving the projector.
When installing / removing a lens, shut down the AC power
to the projector.
When shipping the projector with the lens, remove the lens
before shipping the projector. Always attach the dust cap to
the lens whenever it is not mounted on the projector. The
lens and the lens shift mechanism may encounter damage
caused by improper handling during transportation.
Light Module
1. A light module containing multiple laser diodes is
included in the product as the light source.
2. These laser diodes are sealed in the light module. No
maintenance or service is required for the performance
of the light module.
3. End user is not allowed to replace the light module.
4. Contact qualied distributor for light module replace-
ment and further information.
Cable information
Use shielded cables or cables attached ferrite cores so as
not to interfere with radio and television reception.
For details, please refer to “2. Installation and Connection”
in this user’s manual.
Installing the Projector
This projector is an RG3 product.The projector is for profes-
sional use and must be installed in location where safety is
assured. For this reason, be sure to consult your dealer as
installation and attachment/detachment of the lens unit
must be performed by a professional service personnel.
Never try to install the projector by yourself. This may result
in visual impairment etc.
Connecting the power cord to earth
This equipment is designed to be used in the condition of
the power cord connected to earth. If the power cord is not
connected to the earth, it may cause electric shock. Please
make sure the power cord is earthed properly.
Do not use a 2-core plug converter adapter.
Handling the power cord
• Whenconnectingthepowercordtotheprojector’sACIN
terminal, make sure the connector is fully and rmly
inserted. Be sure to x the power cord using the power
cord stopper. Loose connection of the power cord could
lead to re or electric shock.
• Donotconnectordisconnectthepowercordwithwet
hands. Doing so could result in electric shock.
Lens shift, focus and zoom operations
• Whenshiftingthelensoradjustingthefocusorzoom,do
so from either behind or to the side of the projector. If
adjustments are performed from the front, your eyes
could be exposed to strong light and get injured.
• Keepyourhandsawayfromthelensareawhenperform-
ing the lens shift operation. If not, your ngers could get
caught in the gap between the cabinet and the lens.

6
Disposing of your used product
EU-wide legislation as implemented in each
Member State requires that used electrical
and electronic products carrying the mark (left)
must be disposed of separately from normal
household waste.
This includes projectors and their electrical
accessories. When you dispose of such prod-
ucts, please follow the guidance of your local
authority and/or ask the shop where you pur-
chased the product.
After collecting the used products, they are
reused and recycled in a proper way. This
effort will help us reduce the wastes as well as
the negative impact to the human health and
the environment at the minimum level.
The mark on the electrical and electronic prod-
ucts only applies to the current European
Union Member States.
Outside the European Union
If you wish to dispose of used electrical and
electronic products outside the European
union, please contact your local authority and
ask for the correct method of disposal.
For EU: The crossed-out wheeled bin implies
that used batteries should not be put to the
general household waste! There is a separate
collection system for used batteries, to allow
proper treatment and recycling in accordance
with legislation.
According the EU directive 2006/66/EC, the
battery can’t be disposed improperly. The
battery shall be separated to collect by
local service.
For questions relating to unclear points or repairs
Contact your dealer or the following support branch for
questions relating to unclear points, malfunctions and
repairs of the product.
In Europe
Company Name: NEC Display Solutions Europe GmbH
Address: LandshuterAllee 12-14, D-80637 Munich, Germany
Telephone: [phone]
Fax Line: [phone]
Email Address: [e-mail]
WEB Address: http://www.nec-display-solutions.com
In North America
Company Name: NEC Display Solutions of America, Inc.
Address: 3250 Lacey Rd, Ste 500
Downers Grove, IL 60515 U.S.A.
Telephone: [phone]
Email: [e-mail]
WEB Address: https://www.necdisplay.com/
Important Information
In China
Company Name: NEC (China) Co., Ltd.
Address: 6F, Landmark diplomatic office building D2,
No. 19 East Road, Chaoyang District,
Beijing 100600, R.P.C.
Telephone: [phone]
Email Address: nec-suppor[email protected]
In Hong Kong and Taiwan
Company Name: Strong Westrex, Inc.
Address: Room 4108 China Resources Building, No. 26
Harbour Road, Wanchai, Hong Kong
Telephone: [phone]
Fax Line: [phone]
Email Address: [email protected]
In South Korea
Company Name: Hyosung ITX Co., Ltd.
Address: 1F, Ire Building, 2, Yangpyeong-dong 4-ga,
Yeongdeungpo-gu, Seoul, Korea 150-967
Telephone: [phone]
Fax Line: [phone]
Email Address: [e-mail]
WEB Address: http://www.hyosungitx.com
In Australia and New Zealand
Company Name: NEC Australia Pty Ltd
Address: 26 Rodborough Road Frenchs Forest NSW 2086
Telephone: 131 632 (from anywhere in Australia)
Email Address: display[email protected]
WEB Address: http://www.nec.com.au
In Thailand, Singapore, Malaysia, Indonesia and
Philippines
Company Name: Goldenduck International Co., Ltd.
Address: 65 Soi Phutthamothon Sai 1, 21 Bangramad,
Talingchan, Bangkok, Thailand 10170
Telephone: [phone]
Fax Line: [phone]
Email Address: [e-mail]

7
Important Information
Label Information
Label A
Label C
Label D
Label E
Label B
About the laser module used in the light source
• This product has a built-in laser module. Control and adjustment procedures other than those described in this document
may result in exposure to hazardous laser radiation.
• This product is classied as a Class 1 of Laser Product Safety Standard JIS C 6802: 2014, IEC 60825-1 3rd Edition: 2014.
This product is classied as Risk Group 3 of IEC/EN 62471-5 1st Edition: 2015.
• This product is classied as RG3 of IEC 62471:2006. (for USA).
• This product complies with performance standards for laser products under 21 CFR Part 1040 except with respect to
those characteristics authorized by Variance Number 2015-V-3435 effective on April 7, 2016.
Outline of laser emitted from the built-in light module:
Wave length: Red 635–647 nm, Blue 450–470 nm
Maximum power: Red 91 W, Blue 978 W
Radiation pattern from the protective housing:
Wave length: Red 635–647 nm, Blue 450–470 nm
Maximum laser radiation output: Red 500 mW, Blue 900 mW
The explanatory label of the laser product is put on the top of the projector.
CLASS 1 LASER PRODUCT
WARNING RG3 PRODUCT
• No direct exposure to the beam shall be permitted.
• Do not look into the projector’s lens. Serious damage to your eyes could result.
• Hazardous optical radiation is emitted from this product.
• Not for household use.
• Operators shall control access to the beam within the hazard distance and install the product at the height that will
prevent exposures of spectators’ eyes within the hazard distance.
• This projector must be installed high enough to provide clearance for people who may walk beneath the beam path or
hazard distance. (FDA)

8
Important Information
Label A
Lamp Warning Label
Label B
Laser Explanatory Label

9
Important Information
Label C (NP-02HD)
Label C (NP-NC2402ML)

10
Important Information
Label C (NP-NC2002ML)
Label C (NP-NC1802ML)

11
Important Information
Label D
Label E

12
Laser radiation range/No entry range (HD: Hazard distance)
• The below table describes the radiation range of emitted light by the projector that is classified as Risk Group 3 (RG3) of IEC
62471-5 First edition 2015.
• The below table describes the radiation range of emitted light by the projector that is classified as Risk Group 3 (RG3) of IEC
62471:2006.(for USA).
• Please keep within bounds for installing the projector.
Install a barrier for preventing human eyes from entering the RG3 area.For the barrier installation position, keep horizontal safety
zone over 1m from the RG3 area.In case to install the projector over head, keep over 2m (2.5m for USA) distance at least between
the floor surface and the RG3 area.
Operators shall control access to the beam within the hazard distance or install the product at the height that will prevent expo-
sures of spectators’ eyes within the hazard distance.
NP-02HD/NP-NC2402ML/NP-NC2002ML/NP-NC1802ML
(IEC 62471-5 First edition 2015) (IEC 62471:2006 (for USA))
Lens RG3
HD(m)
Screen size(m)
Lens RG3
HD(m)
Screen size(m)
EHv
H V H V
NC-60LS12Z Wide 1.2 1.1 0.6 NC-60LS12Z Wide 1.7 1.4 0.8 5.9
Tele 2.2 1.3 0.7 Tele 3.0 1.7 0.9 10.2
NC-60LS14Z Wide 1.7 1.3 0.7 NC-60LS14Z Wide 2.3 1.7 0.9 8.5
Tele 2.6 1.3 0.7 Tele 3.4 1.7 0.9 12.2
NC-60LS16Z Wide 1.9 1.2 0.6 NC-60LS16Z Wide 2.5 1.6 0.8 8.7
Tele 3.3 1.4 0.7 Tele 4.5 1.8 0.9 15.0
NC-60LS19Z Wide 2.3 1.2 0.6 NC-60LS19Z Wide 3.1 1.6 0.8 9.7
Tele 4.0 1.2 0.6 Tele 5.4 1.6 0.9 13.7
NC-60LS24Z Wide 3.0 1.2 0.6 NC-60LS24Z Wide 4.0 1.6 0.9 12.6
Tele 4.9 1.2 0.6 Tele 6.6 1.7 0.9 16.8
NC-60LS39Z Wide 5.0 1.2 0.7 NC-60LS39Z Wide 6.7 1.7 0.9 18.5
Tele 8.4 1.3 0.7 Tele 11.2 1.7 0.9 25.7
When installed on a oor or a desktop
HD
H
V
Horizontal safety zone: over 1m
RG3 range
RG3 range
Vertical safety zone: over 2m (2.5m for USA)
floor
Horizontal safety zone: over 1m
[Plan view]
[Side view]
When installed on a ceiling
* If lens shift is utilized, please consider the shift of projected image according to the volume of lens shift.

13
CAUTION
Please heed all precaution for safety.
To install the projector
• For planning the layout of the projector, make sure to take safety measures instructed on the installation manual.
• In order to refuse danger, install either a wall outlet within easy reach for pulling out the power plug in emergency or a device
as a breaker to shut down the power supply to the projector.
• Take safety measures preventing human eyes from entering the RG3 area.
• Considering the installation place, select an appropriate lens and secure safety zone that is determined for each lens. For
operation on the powered projector as light adjustment, make sure appropriate safety measures have been taken.
• Check the validity of taken security measures if appropriate safety zone based on the installed lens is secured. Periodically
check the validity and keep these results.
• Educate the administrator of the projector (operators) about safety before starting to operate the projector.
• This projector is an RG3 product. The projector is for professional use and must be installed in location where safety is
assured. For this reason, be sure to consult your dealer as installation and attachment/detachment of the lens unit must be
performed by a professional service personnel. Never try to install the projector by yourself. This may result in visual impair-
ment etc.
To use the projector
• Instruct the administrator of the projector (operators) to perform inspections before powering on the projector. (Including the
safety check against emitted light by the projector)
• Instruct the administrator of the projector (operators) to be in circumstances able to control the projector whenever the projec-
tor is powered on for an emergency.
• Instruct the administrator of the projector (operators) to keep the installation manual, user’s manual and inspection records to
a place where they can take these documents out easily.
• Instruct them to clarify if the projector is conformed to standards of each country and region.

14
Table of Contents
Important Information ..................................................................... 2
1. What’s in the Box? and the Names of the Projector Parts.......... 16
1-1. Features..............................................................................................................................16
1-2. What’s in the Box? .............................................................................................................18
1-3. Names of the Projector Parts ............................................................................................19
2. Installation and Connection....................................................... 25
2-1. Steps for setting up and connecting.................................................................................25
2-2. Connecting the Power Cable ............................................................................................26
2-3. Connecting the image input terminals..............................................................................31
2-4. Connecting the various control terminal ..........................................................................31
3. Projection of Images (Basic Operation)...................................... 32
3-1. Steps of projecting images................................................................................................32
3-2. Turning your projector on ..................................................................................................33
3-3. Selecting the title of input signal.......................................................................................35
3-4. Adjusting the position and the size of projected screen..................................................................36
3-5. Preventing misoperations..................................................................................................40
3-6. Turning on/off the light with the projector turned on ............................................................. 41
3-7. Turning your projector off ..................................................................................................42
4. Using Menus ............................................................................. 44
4-1. Basic operation with adjustment menus ..........................................................................44
4-2. Table of adjustment menus ...............................................................................................49
4-3. Title Select..........................................................................................................................51
4-4. Configuration......................................................................................................................52
4-5. Title Setup ..........................................................................................................................54
4-6. Information .........................................................................................................................54
5. Maintenance of Your Projector .................................................. 58
5-1. Cleaning the Cabinet .........................................................................................................58
5-2. Cleaning the Lens ..............................................................................................................59
5-3. Cleaning the Air Filters.......................................................................................................59

15
6. Appendix ................................................................................... 62
6-1. Troubleshooting .................................................................................................................62
6-2. Indicator display list...........................................................................................................63
6-3. Operation using an HTTP browser....................................................................................66
6-4. Writing of the log file (Save Information)...........................................................................68
6-5. Outline Drawing..................................................................................................................71
6-6. Specifications.....................................................................................................................72
6-7. Pin Assignment and Functions of Terminal ......................................................................73
6-8. Related products list..........................................................................................................80

16
1.
What’s in the Box? and
the Names of the
Projector Parts
1-1. Features
• DLPCinema®projector
Complies with the strict projection standards defined by the Digital Cinema Initiatives (DCI) industry group in the United States using
leading imaging technology of NEC. It also supports 3D projection and high frame rates (HFR).
• Employsalonglifelaserlightsource
The projector employs a newly developed laser light source offering excellent reliability and redundancy. Since the laser light source
has a long life (approx. 30,000 hours), this delivers low cost operation by removing the need for maintenance such as replacing and
adjusting the light module over extended periods of time. Furthermore, it reduces the risk of the light source suddenly shutting off
and leaving a black screen.
• Deliversreducedinstallationspaceandincreasedfreedomthroughamorecompactandlightweight
body
The use of a 0.98" DLP cinema chip together with integration of the light module into the projector main unit both delivers a reduced
installation area as well as improving the degree of freedom of installation, such as removing the need to connect to external ventila-
tion ducting and supporting both pedestal-mounted and ceiling-suspended installation. A wide variety of optional lenses (sold sepa-
rately) are also available for the projector in order to support a wide variety of installation methods (a lens is not mounted when the
projector is shipped from the factory).
• Equippedwitheasytousefunctions
(1) Lens memory function and light memory function that can be operated with one touch.
The projector is equipped with a lens memory function that can save the zoom position and shift position of the lens and a light
memory function that can save the brightness setting separately for each input signal. This makes it possible to project using
preconfigured settings simply by selecting the signal when projecting multiple different input signals each with different screen
size and brightness settings (Refer to “6-8. Related products list” (page 80) for details on the lenses that support the lens
memory function).
(2) Built-in automatic adjustment function that makes the brightness and color of the light source uniform
Degradation of brightness and variations in color that occur as the light source is used for longer periods of time are kept to a
minimum (the period over which variations in brightness can be limited varies depending on the brightness setting).

17
1. What’s in the Box? and the Names of the Projector Parts
(3) Frequently used titles can be registered in preset buttons
The projector has been equipped with 8 preset buttons that make it easy to select registered title (input signal). To this projector,
100 titles at most can be registered (input signal registration). Among the registered titles, any 16 titles can be assigned to the
preset buttons.
(4) You can operate and configure the projector via a network from a PC
You can operate and configure the projector via a network from a PC by using the separately supplied software Digital Cinema
Communicator (DCC) v2.
• Excellentdust-proofperformance
A circulating cooling system is used to cool the optical components. The system converts warm air into cold air and circulates it
inside a sealed structure, so external air does not come into contact with the optical components. This prevents dust and dirt from
getting on the optical components, maintaining brightness.
* Note that dust and dirt cannot be completely shut out.
• Reducedrunningcostthankstotheuseofmetalfilters
The filters are made of metal, so they can be used repeatedly and do not have to be replaced when performing periodic cleaning.
This not only reduces running costs, but also contributes to preserving the environment since no spent filters are discarded.

18
1. What’s in the Box? and the Names of the Projector Parts
1-2. What’s in the Box?
Check the content of the accessories.
1-2-1. Projector
Projector Service door key x 2 Keys for administrator x 2
Plate Inlet φ35 NFK NFK-G18
M5 × L20 light module fixing screws × 2 Power cable stopper
CD-ROM (User’s Manual) Important Information
TIP
In the event that you did not receive all of the accessories outlined above, or some are damaged, contact your dealer/
distributor.
Differs slightly from the drawings in this manual, but there is no problem in actual use.

19
1. What’s in the Box? and the Names of the Projector Parts
1-3. Names of the Projector Parts
1-3-1. Front of the projector
14
5
12
3
6
12
7
13
11
4
8
10
9
1. LIGHT status indicator
Displays the status of the light source. The indicators turn on when the light source is on and turn off when the light source is off
(See page 65).
2. SYSTEMstatusindicator
These indicate the status of the projector. When the projector is operating normally, these light/blink in green or orange. When
an error occurs, they light/blink in red. When an error occurs, check the contents of the display on the LCD screen. (See page
65)
3. Light power switch
While AC power is being supplied, set the projector power switch and light power switch to ON position, then your projector will
enter a standby state.
4. AC input
Connects to the AC power cable. The AC power cable is not an accessory. Consult with your dealer/distributor about the AC
power cable.
5. Switch for administrator
The projector can be operated normally by inserting the administrator key horizontally and turning it clockwise to the vertical
position.
At this time, the administrator key cannot be removed. The projector will not function unless the administrator key is inserted.
6. Control panel
On the control panel, power to your projector is turned on or off, titles are selected, and various adjustments are made of pro-
jected screen. (See page 23)
7. Connection terminals
Various image signal cable are to be connected here. (See page 22)
You can expand signal input terminals by installing the optional board.
Contact your dealer/distributor for more information on separately sold optional products.
8. Air inlet
The air inlet for cooling inside the projector. Do not cover.
Air filters are provided on the air intakes to prevent dust from entering the projector.

20
1. What’s in the Box? and the Names of the Projector Parts
9. Remoteinterlockconnector(insidethemainunit'ssidepanel)
This port is for safely using the laser in this device. It is used to externally control the laser illumination in the projector. Consult
with your dealer/distributor about using this.
10 .Lens (optional)
Images are projected from the lens. Request your dealer/distributor to install or replace the lens.
11. AC power cord
This cord supplies AC power to the projector. Please contact your dealer/distributor for connection of the AC power cord.
12 .Projector power switch
When the light power switch and projector power switch are turned on with AC power supplied, the projector is set to the
standby mode.
13 .Airintake
These are air intake ports for introducing external air to reduce the temperature inside the projector. Do not block the port.
Air filters are provided on the air intakes to prevent dust from entering the projector.
14 .Exhaustport
The heat inside the projector is expelled from here. Do not block the port.
NOTE
Do not cover the air inlets and outlet while the projector is in operation. Insufficient ventilation leads to a rise of the
internal temperature and may cause a fire or malfunction.
1-3-2. Rear of the projector
1
3
2
4
1. Air inlet
The air inlet for cooling inside the projector. Do not cover.
2. Buzzer (inside rear of projector)
The buzzer rings when the power is turned on or an error has occurred.
3. Air outlet
The air outlet to exhaust heat inside the projector. Do not cover.
4. Notch filter cover
Remove the cover when installing the notch filter. Contact your dealer/distributor for details on replacement notch filters.
NOTE
Do not cover the air inlets and outlet while the projector is in operation. Insufficient ventilation leads to a rise of the
internal temperature and may cause a fire or malfunction.