1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Read all
instructions
l:fofore
using
this
tester!
Avoid
working
alone. If
a~
accident happens, an as_sistant can
bring help. I
Keep
wor~
area
clean
. Cluttered areas invite injuries.
Avoid
electrical
shock.
Use extreme caution when using this tool
near uninsulated conducfors
or
bus bars. Prevent body contact with
grounded suriaces such
as
pipes, radiators, mr.ges•. and cabinet
enclosures when testing voltages.
Avoid
damaging
meter.
Use only as specified in this manual.
Observe
work
area
conditions.
Do not test voltages in damp or
wet locations. Don't expose
t©
rain. Keep
work
area well lit.
Keep
children
away. Children must never be allowed in the work
area. Do not let them handle machines, tools,
or
extension cords.
Store
idle
equipment.
When not in use, tools must be stored in a
drylocation to inhibit rust.
Al
~
ays
lock up tools and keep out
of
reach
.
of
children.
Dress
properly
. Do not wear loose clothing
or
jewelry as they can
be caught in moving parts. Protective, electrically nonconductive
clothes and nonskid footwear are recommended when working. Wea.r
restrictive hair covering to cottain long hair.
Use
eye
protection.
Alway.r
wear
ANSI_approved impact safety
goggles. .
Do
not
overreach.
Keep proper footing and balance at all times.
Do not reach over or across electrical cables
or
frames.
Maintain
tools
with
care. lnsure multimeter has a fresh battery.
Inspect test leads periodical! . and, ifdamaged, have_them repaired
by an authorized technician. · ·
Stay
alert
. Watch
what
you ; re doing, use common sense. Do not
operate any tool when you ark tired.
Check
for
damaged
parts
. Before using any tool, any_part that
appears damaged should be1
1
carefully checked to determine that it
will operate properly and perform its intended function. Checkforany
broken parts and anyother
co
~
ditiori
that mayaffect properoperation.
Any part that is damaged should be properly repaired or replaced
by a qualified technician. Do not use the tool if any switch does not
operate properly.
SKU 69096
For
replacement parts, please call 1-800-444-3353.
Page
3
15.
Replacement
_
parts
and
accessories
. When servicing, use only
identical replacement parts. Use
of
any
Other parts will void the
warranty
. Only use accessories intended for use with this tool.
Approved accessories are available from Harbor Freight Tools.
16.
Do
not
operate
tool
if
under
the
influence
of
alcohol
or
drugs
.
Read warning labels on prescriptions to determine if your judgment
or
reflexes are impaired while taking drugs. Ifthere is any doubt, do
not operate the tool.
17. We
11'1.l~ommomll
~~a~
oniy
a license(!]
elac~iri
ci=in
wcr~
on
hi
g
h-
, voltage
or
other
potentially dangerous circuits.
Note
: Performance
of
this tool may vary depending on condition
of
internal
battery.
Warning
: The warnings, cautions, and instructions discussed
in this instruction manual cannot cover all possible
conditions and situations that may occur. It must be
understood by the operatorthat common sense and
caution are factors which cannot be built into this
product, but must be supplied by the operator.
Warning:
This
product
contains
or
produces
chemicals
,
including lead, known to the State
of
California to
cause cancer and birth defects (orother reproductive
harm).
(California Health & Safety Code 25249.5 et seq.)
Unpacking
When unpacking, make sure the following parts are included: Digital
Multimeter,
and
black
and
red
Test
Leads
.If
any
parts are missing or broken, please
call
Harbor Freight
Tools
at
the
number
on
the
cover of this manual. If any part of
the
machine
is
missing or broken,
please
call
Harbor Freight
Tools
at
the
number
on
the
front cover
as
soon
as
possible. I
Opeitation
WARNING
:·
ELECTRICAL
SHOGK
CAN
CAUSE
DEATH
OR
INJURY. AVOID
TOUCHIN~
EXPOSED CONDUCTORS
"
OF
ELECTRICITY.. I
Additional
Multimeter
Precautions
1.
Do not test voltage on
AC
circuits higherthan 750 volts.
2. Do not test voltage on DC circuits higher than 1000 volts.
3.
Do not test current on circuits higher than 10 amps.
SKU 69096
For
replacement parts, please call 1-800-444-3353. Page4
