CentoLight ZEPHIRO HAZE 1000ST User manual

Carefully read this manual and properly take care of it
Leggete questo manuale e conservatelo per future consultazioni
User Manual
Manuale Utente
1000W Water-Based Stage Haze Machine with DMX Control
Macchina per Nebbia a Base d’Acqua da 1000W con Controllo DMX
ENG
ITA
ZEPHIRO HAZE 1000ST

22
Dear customer,
First of all thanks for purchasing a Centolight® product. Our mission is to satisfy all
possible needs of light designers and professionals of entertainment lighting, by
offering a wide range of products based on the latest technologies.
We hope you will be satisfied with this fixture and, if you want to collaborate, we
are looking for a feedback from you about product operation and possible im-
provements to be introduced in the next future. Go to our website www.centolight.
com and send an e-mail with your opinion; this will help us to build equipment ever
closer to professional’s real requirements.
The Centolight Team
Gentile Cliente,
Grazie per aver scelto un prodotto Centolight®. La nostra missione è quella di sod-
disfare ogni possibile richiesta da parte di light designers e professionisti dell’illu-
minotecnica per l’intrattenimento, offrendo una vasta gamma di apparecchiature
basate su tecnologie di ultima generazione.
Speriamo di aver soddisfatto le vostre aspettative e, se voleste collaborare, sarem-
mo lieti di ricevere un vostro feedback sulla qualità del prodotto al fine di migliorare
costantemente la nostra produzione. Visitate il nostro sito www.centolight.com ed
inviateci una mail con la vostra opinione; questo ci aiuterà a sviluppare nuovi pro-
dotti quanto più vicini alle vostre esigenze.
Il Team Centolight

33
Eng
Table of ConTenTs
1 - Before You Start 4
1.1. What is included- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
1.2. Unpacking Instructions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
1.3. Accessories - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
1.4. Disclaimer - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
2 - Safety Instructions 5
2.1. Symbols Meaning - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5
2.2. Safety Notes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5
3 - Introduction 7
3.1. Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8
3.2. Product Dimensions- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8
3.3. Product Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9
4 - Setup 9
4.1. Mains Power & Fuse - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9
4.2. DMX Connection- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
4.3. DMX Terminator - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11
4.4. 3-Pin vs 5-Pin DMX cables - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11
4.5. Wireless Remote Control - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12
5 - Front Panel Description 13
5.1. Control Parameters - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13
6 - Correct Use and Maintenance 15
6.1. Routine Maintenance And Common Faults - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15
7 - Specication 17
8 - Warranty And Service 18
9 - Warning 18

44
Zephiro Haze 1000ST User Manual
Eng
1 - before You sTarT
Thank you for purchasing our Zephiro Haze 1000ST. Enjoy your new equipment and
make sure to read this manual carefully before operation! This user manual is made
to provide both an overview of controls, as well as information on how to use them.
1.1. What is included
Package include:
y1x Centolight Zephiro Haze 1000ST Machine
y1x 1m Power Cord (EU plug to Blue PowerCon)
yThis User Manual
ATTENTION: Packaging bag is not a toy! Keep out of reach of children!!! Keep in
a safe place the original packaging material for future use.
1.2. Unpacking Instructions
Carefully unpack the product immediately and check the content to make sure all
the parts are in the package and are in good condition. If the box or the contents
(the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier or dealer/seller immediately. In addition, keep
the box and contents for inspection.
If the fixture must be returned to the manufacturer, it is important that it is returned
in the original manufacturer box and packing. Please do not take any action without
first contacting your dealer or getting in touch with our after-sales support service
(visit www.centolight.com for details).
1.3. Accessories
Centolight can supply a wide range of quality accessories that you can use with
your ZEPHIRO Series equipment, like Consumables, Cables, Splitters, DMX control-
lers, and a wide range of other fixtures.
All products in our catalogue has been long tested with this device, so we recom-
mend you to use Genuine Centolight Accessories and Parts. Ask your Centolight
dealer or check out our website www.centolight.com for any accessories you could
need to ensure best performance of the product.
1.4. Disclaimer
The information and specifications contained in this User Manual are subject to
change without notice. Centolight assumes no responsibility or liability for any errors
or omissions and reserves the right to revise or to create this manual at any time.
Copyright© 2021 Centolight. All rights reserved.

55
Zephiro Haze 1000ST User Manual
Eng
2 - safeTY InsTruCTIons
yRead these instructions
yKeep these instructions
yHeed all warning
yFollow all instructions
2.1. Symbols Meaning
The symbol is used to indicate that some hazardous live termi-
nals are involved within this apparatus, even under the normal
operating conditions, which may be sufficient to constitute the
risk of electric shock or death.
The symbol is used to describe important installation or configu-
ration problems. Not following advice and information on how to
avoid such problems may lead to product malfunction.
Caution! This symbol indicates high temperature parts! In partic-
ular, the nozzle of the Zephiro Haze 1000ST can cause burns. Pay
attention to high temperatures and avoid touching the nozzle.
This symbol indicates a protective grounding terminal.
WARNING: Describes precautions that should be observed to prevent the
danger of injury or death to the operator.
To protect the environment, please try to recycle packing material
and exhausted consumables as much as possible.
Warning of Moisture Prevention: it remind the operator to keep
the machine and controller dry. Do not use them on rainy and
snowy days.
Don’t throw this product away just as general trash, please deal
with the product follow the abandon electronic product regula-
tion in your country.
2.2. Safety Notes
Please read the following Safety Notes carefully before working with the product.
They include important safety information about installation, usage, and mainte-
nance.

66
Zephiro Haze 1000ST User Manual
Eng
1) Personal Safety
yAlways connect the product to a grounded circuit to avoid the risk of electric
shock. During heating up and operation, the housing will get hot: do not touch.
yThe product is very hot during operation and it remains hot for a long time after
operation has stopped. Do not touch the product’s nozzle.
yMake sure that children, unauthorized people and animals do not have access
to the machine.
yThe operation noise is without harm to ear. No need to wear ear protection
when close to the working machine.
2) Mounting and Rigging
yFor safety reasons, it is not recommended to mount the product on suspended
structures. Operate the product while it is on the ground only.
yThe product is for both indoor and outdoor use but, in order to prevent risk of
fire or shock, do not expose the product to rain or moisture
CAUTION: When transferring product from extreme temperature environments,
(e.g. cold truck to warm humid ballroom) condensation may form on the inter-
nal electronics of the product. To avoid causing a failure, allow product to fully
acclimate to the surrounding environment before connecting it to power.
yDo not use in a confined space. Always install the product in a location with
adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
yBe sure that no ventilation slots on the product’s housing are blocked.
3) Power and Wiring
yAlways make sure that the voltage of the outlet to which you are connecting
the product is within the range stated in paragraph “7 - Specification” on page
17 or rear panel of the product (AC220V- 50/60Hz).
yMake sure the power cord is not crimped or damaged. Never connect this prod-
uct to a dimmer pack or rheostat.
yNever disconnect the product from power cord by pulling or tugging on the cord.
yTo eliminate unnecessary wear and improve its lifespan, during periods of non-
use completely disconnect the product from power via breaker or by unplugging
it.
yTo avoid electric shock, all fixtures must be connected to circuits with a suitable
ground.

77
Zephiro Haze 1000ST User Manual
Eng
4) Water / Moisture
yThe unit should be protected from moisture and rain, and can not be used near
water; for example near a bathtub, a kitchen sink, a swimming pool, etc.
5) Heat
yThe apparatus should be located away from heat sources such as radiators,
stoves or other appliances that produce heat.
Don not use it when maximum ambient temperature is higher than 50°C. Work
temperature ranges from -10°C to 50°C (14°F to 122°F).
6) Fuse
yTo avoid the risk of fire and damage to the unit, use only the type of fuse de-
scribed in “7 - Specification” on page 17. Before replacing the fuse, make
sure the device is switched off and unplugged.
7) DMX connection
yWhen use DMX controller, please make sure that there is no interference sources
(e.g. intercom, high frequency radio waves and radiation source).
8) Servicing
yDo not implement any servicing other than those means described in the man-
ual. Refer all servicing to qualified service personnel only. The internal compo-
nents of the equipment must be purchased from the manufacturer. Only use
accessories/attachments or parts recommended by the manufacturer.
3 - InTroduCTIon
It is well known how the world of show business and entertainment is based on the
fusion of music, images, lights and environmental effects. The sensory involvement
of those who enjoy the entertainment event is increasingly present nowadays. Cen-
tolight knows very well this need and thanks to the the Zephiro line it offers a wide
range of machines for smoke, fog, bubbles, snow and more.
Zephiro Haze 1000ST is a powerful and compact water-based fog machine; de-
signed for professional on-stage applications and equipped with flight case and
DMX control.
It can generate a persistent and homogeneous haze which can maximize the visual
effects and light beams of any type of spotlight in settings such as theaters, photo
and TV studios, film sets, discos, live events, etc.

88
Zephiro Haze 1000ST User Manual
Eng
It has a power output of 1000W and is designed for indoor applications with an
output of 170m3/min of haze. Consumption ranges from a minimum of over 4h/Liter
at 30% to about 2h/Liter at 100% (continuous operation); the internal tank is 2 liters.
3.1. Features
y170m3/min. haze output fills up mid-sized rooms quickly
yContinuous haze output after about 1,5min. warm-up time
yAdjustable Haze output, blower speed and DMX channels
yEasy user interface, thanks to the LCD display
yBundled sturdy Flight-case for on-stage use
3.2. Product Dimensions
195mm (76.8”)
425mm (167.3”)
25mm (9.8”)
294mm (115.7”)

99
Zephiro Haze 1000ST User Manual
Eng
3.3. Product Overview
3PIN
5PIN
POWER IN
AC 220V-240V 50Hz
FUSE
F10A - 250V
ZEPHIRO
HAZE 1000st
DMX IN DMX OUT
Importedin the EU by FRENEXPORT SPA
ViaE. Ferrari, 10 - 62017 Porto Recanati (Italy)
www.frenexport.com
1000W Stage Haze Machine
10
34 5
12
6 7
11
89
13
1
2
1. Anti-Spill Tank
2. Liquid tank cap
3. Liquid hose with quick connector
4. DMX 5-Pin XLR Input
5. DMX 3-Pin XLR Input
6. DMX 3-Pin XLR Output
7. DMX 5-Pin XLR Output
8. LCD Screen
9. Control Panel
10. Haze Output Deflector
11. Fuse Holder
12. Power inlet Connector
13. Remote Control
4 - seTup
4.1. Mains Power & Fuse
POWER IN
AC 220V-240V 50Hz
FUSE
F10A - 250V
POWER IN socket (n. 12) - Connect the device to the mains with the supplied power
cable. In case of loss or replacement of the cable, refer to the following table which
shows the correspondence of the internal wires:
Cable (EU) Pin International
Brown Live L
Blue Neutral N
Yellow/Green Earth

1010
Zephiro Haze 1000ST User Manual
Eng
The earth must to be connected! Pay attention to the safety! Before taking into
operation for the rst time, the installation has to be approved by an expert.
FUSE HOLDER (n.11) - In case you need to replace the fuse, make sure that the
appliance is switched off, disconnect the input power plug, and unscrew the fuse
holder cover shown above with a Phillips screwdriver.
CAUTION: Replace the fuse ONLY with one of the same type indicated in the
section “7 - Specication” on page 17 (T10A/250V - 5x20 mm). A lower value
fuse would blow immediately after the rst power on; a higher value would not
act as a fuse in case of anomalous current absorption or short circuit.
WARNING: Always connect the product to a protected circuit (with circuit break-
er). Make sure the machine has an appropriate electrical ground to avoid the
risk of electric shock or re.
WARNING: Never connect the Zephiro Haze 1000ST to a rheostat (variable
resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only
as a 0 to 100 % switch.
4.2.DMX Connection
3PIN
5PIN
DMX IN DMX OUT
4 5 6 7
DMX INPUTS - Male 3-pin (n. 5) and Male-5-pin (n. 4) XLR sockets for connection to
DMX control devices.
DMX OUTPUT - Female 3-pin (n. 6) and Female 5-pin (n. 7) XLR sockets for sending
the DMX control signal to another DMX device.
DMX machines are designed to receive data through a serial Daisy Chain. A Daisy
Chain connection is where the DATA OUT of one fixture connects to the DATA IN of
the next fixture. The order in which the machines are connected is not important
and has no effect on how a controller communicates to each of them. Use an order
that provides for the easiest and most direct cabling.

1111
Zephiro Haze 1000ST User Manual
Eng
3-Pin XLR
Pin 1: GND
Pin 2: DMX -
Pin 3: DMX +
OUTPUTINPUT
DMX use of 3-Pin XLR Connectors
DMX Termonator
Unit 1 Unit 2 Last Unit
DMX 512
Connect machines using shielded 2-conductor twisted pair cable with 3-pin XLR
male to female connectors. The shield connection is pin 1, while pin 2 is Data Nega-
tive (S-), and pin 3 is Data positive (S+).
CAUTION: Wires must not come into contact with each other; otherwise the x-
tures will not work at all, or will not work properly.
4.3.DMX Terminator
DMX is a resilient communication protocol, however errors still occasionally occur.
In order to prevent electrical noise from disturbing and corrupting the DMX control
signals, a good habit is to connect DMX output of last fixture in the chain to a DMX
terminator, especially over long signal cable runs.
The DMX terminator is simply an XLR connector with a 120Ω (ohm), 1/4 Watt resistor
connected across Signal (-) and Signal (+), respectively, pins 2 and 3, which is then
plugged into the output socket on last projector in the chain. The connections are
illustrated below.
120ohm, 1/4 W
resistor
DMX Terminator
Complimentary signal cable can transmits signals to 20 unit xtures at most.
Signal amplier is a must to connect more xtures.
4.4. 3-Pin vs 5-Pin DMX cables
DMX connection protocols used by controllers and fixtures manufacturers are not
standardized around the world. However, two are the most common standards:
5-Pin XLR and 3-Pin XLR system. If you wish to connect your 5-Pin device to a 3-Pin
XLR input fixture, you need to use an adapter-cable or make it by yourself.

1212
Zephiro Haze 1000ST User Manual
Eng
Following the wiring correspondence between 3-Pin and 5-Pin plug and socket
standards
5-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
4.5.Wireless Remote Control
Zephiro Haze 1000ST features a wireless controller (n.13). In case of multiple units,
one transmitter can work with more machines; no paring procedure is needed.
There are 2 buttons on the wireless remote transmitter as below:
A
B
DIGITAL REMOTE
CONTROLLER
A Button: Press this button to output haze. The emission will con-
tinue until you press B button. Red LED on top of A button will lit.
B Button: Press this button to stop the haze emission.
1) Battery Replacement
If the remote control cannot work (red LED does not lit and machine does not oper-
ates), please check whether battery is low and need to be replaced.
To change the battery, remove the cover on the back of the remote control and
replace the old battery with one of the same type (23A - 12V).

1313
Zephiro Haze 1000ST User Manual
Eng
ATTENTION: Pay attention to respect the polarity. The two ends of the battery
have a “+” (positive pole) and a “-” (negative pole) respectively. These marks are
also present inside the battery compartment. Make sure the “+” of the battery is
towards the “+” indicated in the battery compartment.
5 - fronT panel desCrIpTIon
Zephiro Haze 1000ST is equipped with a Control Panel consisting of an LCD display
and 6 buttons:
yFUNCTION: This button allows to scroll all the device Control Parameters
yUP : Value adjustment Upward
yDOWN : Value adjustment Downward
yTIMER: Starts the timer controlled functioning
yVOLUME: Starts and Stops the output of constant haze quantity
yMANUAL: Press and hold for Manual Haze Output. When the button is re-
leased, the Haze emission stops
5.1. Control Parameters
1) Interval
Haze
Ready Once warming process is complete the LCD screen will show the
following main message.
Pressing once the Function button ,the display will show “INTERVAL” parameter
and its relative value as follows:

1414
Zephiro Haze 1000ST User Manual
Eng
Set 10
Interval The “Interval Parameter” allows to adjust the interval haze emission
timer using buttons. The timer range is from 10 to 200
seconds.
2) Duration
Pressing two times the Function button when the device shows the main
message (Ready Haze) the display will show “DURATION” parameter and its relative
value as follows:
Set 10
Duration The “Duration Parameter” allows to adjust the continuous Haze
Output Time using buttons. The “Duration Parameter”
range is from 10 to 200 seconds.
3) DMX512
Pressing three times the Function button when the device shows the main mes-
sage (Ready Haze) the display will show “DMX512” parameter and its relative value
as follows:
Set 1
DMX512
The “DMX512 Parameter” allows to set the desired DMX address
using buttons. The “DMX512 Parameter” range is from 1 to
512.
After setting the DMX Address the channel configuration will be the
following:
yChannel 1: Volume Output Control (Selected Address)
yChannel 2: Fan Speed Control (Selected Address + 1)
4) Volume
Press the Function button till the display shows “VOLUME” parameter and its
relative value as follows:
Set 100
Volume This parameter allows to adjust the output of constant Haze quan-
tity from 1% to 100% using buttons.
5) Fan Speed
Press the Function button till the display shows “FAN SPEED” parameter and its
relative value as follows:
Set 100
FanSpeed This parameter allows to set the fan speed from 1 to 100 using
buttons.

1515
Zephiro Haze 1000ST User Manual
Eng
6 - CorreCT use and MaInTenanCe
This haze machine should be used in dry and well-ventilated place . Please avoid
any water or rain fall in the machines, if water and rain fall in, turn off the power
immediately. Keep far away from children, fire, explosive and flammable things, and
avoid scalding.
NOTE: In the rst time use, some liquid might spray out. This is normal.
yWhen liquid is getting low, please add it again in time. If the fog machine works
without fluid for a long time, its pump and other parts could get damaged.
When adding fluid, remember to turn power off, and carefully avoid spilling over
to cause short circuits.
yThe haze machine should work under professional operator’s supervision,
please do not add flammable liquids or gas into the fog fluid tank.
yWhen you don’t use the machine for long time or after use, please disconnect
power or unplug the power cable. After using, please wipe out the liquid in the
tank, as it would avoid the housing to be corroded.
yAll haze machines will have condensation or moisture around the Output De-
flector.
yAll haze machines have heating-cooling cycles. When internal temperature
drops to minimum, the pump automatically turns on and begins heating. Once
heating is complete, the machine starts to spray haze again.
yIn the case of a serious operating problem, stop using the unit immediately.
Never try to repair the unit by yourself Repairs carried out by unskilled people
can lead to damage or malfunction. Please contact the nearest authorized tech-
nical assistance center Always use the same type of spare parts
yNever connect the device to a dimmer pack
yMake sure the power cable in never crimped or damaged and never disconnect
it by pulling or tugging on the cable.
WARNING: Fog machines may set o Smoke Alarms
6.1. Routine Maintenance And Common Faults
ATTENTION: Periodically clean your machine to reduce replacement parts and
repair expenses.
yPoor haze liquid can cause blockage. It is recommended to use high quality
haze liquid.
yThe machine might get blocked due to high concentration fluid, not-pure fluid
or overheat, so regular care and maintenance can ensure long-term use. After
about 40 hours continue use, please prepare an 80% distilled water and 20%

1616
Zephiro Haze 1000ST User Manual
Eng
white vinegar blend to remove any accumulated impurities inside boiler and
pipe, as following:
yWash the pipe in the tank and its filter head.
yPour out any liquid inside, and replace with the cleaning liquid (80% distilled
water and 20% white vinegar), turn on power, keep it operating till the cleaning
liquid runs out.
yIf the haze turns less, and the pump makes noise, switch off the unit immediately
and check fluid level, fuse, controller interface and power plug. If all of these are
normal, please connect power again. If problems still continue, please contact
the supplier.
yWhen you shut down the machine, it is recommended that you remove any
remaining fluid inside. Especially when the machine will not be used for a long
time. It is recommended that you open the tank, remove the fluid hose and
place it next to the tank in open air.
yAfter use, let the haze machine cool down before transporting it by the handle.
Small bits of haze may still be emitted just after the machine is turned off. Let
the machine cool down for at least 20 minutes and only transport it when the
housing of the machine reaches a temperature that is comfortable enough to
handle. Transporting the machine while it is still hot may cause injuries and per-
manent damage to the internal electronics and heating elements.

1717
Zephiro Haze 1000ST User Manual
Eng
7 - speCIfICaTIon
Heating element 1000 Watt
Warm-up time Approximately 1,5 min.
Tank capacity 2 Liters
Haze Output 170m3/min.
Liquid consumption 200 Min/L (30%) - 120 Min/L (100%)
Control Panel Yes (6 buttons with LCD display 2x8 Characters)
DMX Connections 3-pin and 5-pin XLR In/Out connectors
DMX Mode 2-Channel (Fan Speed, Output Haze Volume)
Remote Control 2-Button (A, B) - UHF 433.92 MHz
Remote Control Battery 12V, Type 23A - Alkaline
Flight-case Included
Voltage 220Vac, 50Hz
Power Consumption 1030W
Internal fuse 10A - 250V fast blow, 20mm glass
Dimensions (WxDxH) 425 x 294 x 195 mm (16.7 x 11.6 x 7.7”)
Weight 12 Kg – 26.5 lbs.
Packing Size 475 x 245 x 420 mm (18.7 x 9.6 x 16.5”)
Packing Weight 13 Kg – 28.7 lbs.
Note: Our products are subject to a process of continual further development. Therefore modifications to
the technical features remain subject to change without further notice.

1818
Zephiro Haze 1000ST User Manual
Eng
8 - WarranTY and servICe
All Centolight products feature a limited two-year warranty. This two-year warranty
starts from the date of purchase, as shown on your purchase receipt. The following
cases/components are not covered by this warranty:
yAny accessories supplied with the product
yImproper use
yFault due to wear and tear
yAny modification of the product effected by the user or a third party
Centolight shall satisfy the warranty obligations by remedying any material or
manufacturing faults free of charge at Centolight’s discretion either by repairing or
exchanging individual parts or the entire appliance. Any defective parts removed
from a product during the course of a warranty claim shall become the property of
Centolight.
While under warranty, defective products may be returned to your local Centoli-
ght dealer together with the original proof of purchase. To avoid any damages in
transit, please use the original packaging if available. Alternatively, you can send
the product to Centolight SERVICE CENTER – Via Enzo Ferrari, 10 – 62017 Porto Re-
canati - Italy. In order to send a product to service center, you need an RMA number.
Shipping charges have to be covered by the owner of the product.
For further information please visit www.centolight.com
9 - WarnIng
PLEASE READ CAREFULLY – EU and EEA (Norway, Iceland and Liechtenstein) only
This symbol indicates that this product is not to be disposed of with your
household waste, according to the WEEE Directive (2012/19/UE) and your
national law.
This product should be handed over to a designated collection point, e.g.,
on an authorized one-for-one basis when you buy a new similar product or to an
authorized collection site for recycling waste electrical and electronic equipment
(WEEE).
Improper handling of this type of waste could have a possible negative impact on
the environment and human health due to potentially hazardous substances that
are generally associated with EEE. At the same time, your cooperation in the correct
disposal of this product will contribute to the effective usage of natural resources.
For more information about where you can drop off your waste equipment for recy-
cling, please contact your local city office, waste authority, approved WEEE scheme
or your household waste disposal service.

1919
Ita
soMMarIo
1 - Prima Di Iniziare 20
1.1. Cosa è Incluso - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20
1.2. Istruzioni per il Disimballaggio - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20
1.3. Accessori - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20
1.4. Limiti di Responsabilità - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20
2 - Istruzioni di Sicurezza 21
2.1. Significato dei simboli - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21
2.2. Note sulla sicurezza - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21
3 - Introduzione 23
3.1. Caratteristiche - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 24
3.2. Panoramica del Prodotto - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 24
3.3. Dimensioni del Prodotto- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 25
4 - Connessioni 25
4.1. Alimentazione di Rete e Fusibile - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 25
4.2. Connessioni DMX - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 26
4.3. Terminatore DMX - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 27
4.4. Cavi DMX 3-Poli/5-Poli- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 27
4.5. Controllo con Telecomando - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28
5 - Descrizione del Pannello Frontale 29
5.1. Parametri di Controllo - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 29
6 - Uso Corretto e Manutenzione 31
6.1. Manutenzione Ordinaria e Guasti Comuni - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 32
7 - Speciche Tecniche 33
8 - Garanzia e Assistenza 34
9 - Avviso UE e SEE (Norvegia, Islanda, Liechtenstein) 34

2020
Manuale Utente Zephiro Haze 1000ST
Ita
1 - prIMa dIInIzIare
Grazie per aver acquistato la Zephiro Haze 1000ST. Prima di iniziare, assicuratevi di
leggere attentamente questo manuale; è stato creato per fornire sia una panorami-
ca dei controlli, sia informazioni su come usarli.
1.1. Cosa è Incluso
La confezione include:
y1x Centolight Zephiro Haze 1000ST
y1x Cavo di rete da 1m (spina EU - connettore PowerCon blu)
yQuesto Manuale d’uso
ATTENZIONE: La confezione non è un giocattolo! Tenere fuori dalla portata dei
bambini! Conservare in un luogo sicuro per un uso futuro.
1.2. Istruzioni per il Disimballaggio
Tirare fuori dall’imballo il prodotto e controllare il cartone per assicurarsi che tutte
le parti siano presenti e in buone condizioni. Se la confezione o il contenuto risultas-
sero danneggiati dalla spedizione o mostrassero segni di maltrattamento, avvisare
immediatamente il vettore o il rivenditore e conservare la scatola e il contenuto per
una eventuale ispezione.
Se l’apparecchiatura dovesse essere restituita, è importante farlo nell’imballo ori-
ginale. Si prega di non intraprendere alcuna azione senza prima aver contattato il
proprio rivenditore o il nostro servizio di assistenza (visitare www.centolight.com).
1.3. Accessori
Centolight fornisce un’ampia gamma di accessori che è possibile usare con le ap-
parecchiature della serie ZEPHIRO; quali materiali di consumo, cavi, splitter, control-
ler DMX e un’ampia gamma di altre apparecchiature. Tutti i prodotti nel catalogo
Centolight sono stati testati a lungo con questo dispositivo, quindi ti consigliamo di
usare sempre accessori e ricambi originali.
1.4. Limiti di Responsabilità
Le informazioni e le specifiche contenute in questo manuale utente sono soggette
a modifiche senza preavviso. Centolight non si assume alcuna responsabilità per
eventuali errori od omissioni e si riserva il diritto di rivedere o creare questo manua-
le in qualsiasi momento.
Copyright© 2021 Centolight. Tutti i diritti riservati.