Cerio ANT-12WN User manual

CERIO Corporation
A
AN NT T- -1 12 2W WN N
2.4Ghz Outdoor Thin Type Omni 12dBi
Pole / Wall Mount Antenna
Installation Guide

Installation Guide
Wireless Network 2.4Ghz Outdoor Thin Type Omni 12dBi Pole / Wall Mount Antenna
Specifications
Antenna Type
Indoor / Outdoor Omni Antenna
Frequency Range
2.4 ~ 2.5GHz
Network Specification
Wireless 2.4Ghz Network IEEE 802.11n , IEEE 802.11b/g
Gain
12 dBi
V.S.W.R
< 1.5
Beam Width-H Plane
360˚
Beam Width-E Plane
16˚
Polarization
Vertical (Linear)
Input Impedance
50 Ohms
Connector
N-Type Female
Form Factor
Wall Mount and Pole Mount
Rated Wind Velocity
150Km / Hour
Operation Temperature
-20˚C - + 70˚C
Storage Temperature
-30˚C - + 80˚C
Humidity
95% maximum (non-condensing)
Product Dimension
550 * 13 (L *W) mm 13mm Diameter (max)
With Wall Mount Bracket: 604*55(L*W) mm
Weight
106g (With Wall Mount Bracket : 199g)
Package Content
ANT-12WN Antenna Main Unit
x1
Pole / Wall Mount kit
x1
Quick Installation Guide Booklet
x1
Warranty Card
x1
Technical Support
E-mail: [e-mail]
TEL: [phone] #222
Web Site: www.cerio.com.tw

Installation Guide
Wireless Network 2.4Ghz Outdoor Thin Type Omni 12dBi Pole / Wall Mount Antenna
Wall Mount Sample
Mount the "L" type bracket at the back of the antenna, then mount the antenna on the wall, then
lock all the screws and connector between antenna and cable.

Installation Guide
Wireless Network 2.4Ghz Outdoor Thin Type Omni 12dBi Pole / Wall Mount Antenna
Pole Mount Sample
Mount the "L" type bracket at the back of the reflector, then mount the antenna on the mast
supplied by customer according to the Mounting diagram, then lock all the screws and
connector between antenna and cable.