Certa CTEXTJACKXA User manual

4 Ton 4WD Exhaust Jack Set
CTEXTJACKXA
Quick Start Guide
Product Layout
S ecifications
1 Fabricated Lifting Bag High tenacity 1000 Denier Nylon coated both sides with
plastacised PVC. Do ble skin top and base.
2 Inlet Connector Welded
to Bag
Inner mechanical connection of glass reinforced polyamide,
overmo lded in PVC.
3 Exha st Connector Cone R bber Injection Mo lding
4 Bag Connector/Valve Glass reinforced polyamide mo lding.
5 Hose – 6 metres (20
feet)
UV resistant EPDM r bber extr ded lay-flat t be.
Dimensions
Weight Diameter Height Lift Capacity
Kg cm ins cm ins kg lbs
6 60 23.6 78 30.7 4000 8800
Product A lications
Using yo r vehicles own low press re exha st to inflate the exha st jack, this prod ct is capable
of lifting yo r vehicle o t of r ts or holes, as well as to lift the vehicle p high eno gh to change a
wheel or install snow chains.
Great for se if yo are st ck in sand, m d, snow or soft gro nd.
Product Ti s
Comes with a complete kit incl ding a pair of work gloves to keep yo r hands clean and
protected, a p nct re repair kit in case the bag is pierced, laminated operating instr ctions and a
handy carry bag in which to store everything, ready for se.

Features
•Will safely lift yo r vehicle p o t of a r t or bog within seconds.
•Simple to se witho t the risk of damage that can otherwise happen to yo r car with a
high lift jack.
•An essential piece of eq ipment which yo need to always have in yo r vehicle in the case
of emergencies.
•Eq ally at home in the heat of the African desert, or in the frozen landscapes of Alaska.
Safety Precautions
1. Never allow any part of yo r body to be nder the vehicle when it is s pported only by
the exha st jack.
2. Be aware that a vehicles exha st f mes are toxic if inhaled in large q antities. Therefore,
do not se the exha st jack in a confined space, and always t rn the engine off when not
inflating the jack.
3. Always chock both front and rear wheels opposite to the side nder which the jack is
being sed, and also apply the handbrake.
4. When placing the exha st jack nder the vehicle, ens re the bag is away from hot or sharp
nderbody parts and clear from any sharp sticks in the gro nd.
5. It is essential to se the protective mats provided to help prevent p nct ring the bag.
6. Do not over-inflate the bag. 90% capacity is ample.
Warning: Do not EVER allow yo r body to be nder a vehicle when it is s pported only by the
exha st jack.
Fitting & Care Instructions
1. Sec rely chock wheels on side of vehicle opposite to that being lifted.
2. Select a strong nderbody location free of sharp objects and clear of hot
exha st pipes and m fflers.
NOTE: By moving the position of the bag, one side of the vehicle can be
lifted.
Place exha st jack nder vehicle at the selected location, with one flat s rface
on the gro nd and the other ready to s pport the vehicle. Use the protective
mats on top and bottom.
3. Assemble the hose and lay it o t flat to remove any kinks.
4. Start engine and while idling, press the black cone firmly over the end of the
exha st pipe.
Partially inflate the bag, then check that the bag is positioned sq arely on the
vehicles nderbody.
5. Inflate the bag ntil the wheel is clear of the gro nd.
NOTE: If the bag does not inflate, check yo r exha st system for leaks.
6. To deflate, t rn the handle anti-clockwise and remove from connection.
Clean and repack into the container s pplied.