Chainway C70 User manual

Support Contact Details
Contact Us for Any Issues or Inquiries:
Service Call:
0086 - 755 - 23223300 (Switchboard)
0086 - 755 - 23223300 - 8103 (After-sale Service)
0086 - 755 - 23223300 - 8006 (Technical support)
Service Email:
[email protected]
Shenzhen Chainway
Information Technology Co., Ltd
APPEARANCE OF EQUIPMENT
01 START UP / SHUT DOWN
03
02 CARD SLOT
C70 device configuration: 2D barcode scanning
module, NFC, Camera (rear), 4G (NA), GPS,
Bluetooth, WIFI, 2G RAM, 16G ROM.
1. Long press the power button for 2
seconds to power on or off the
device.
2. Short press the power button to
get into sleep mode or wake up
the device.
SCANNING
05
2D Scan engine：
The scan engine is professional
1D/2D barcode scan engine，press
the scan button to activate the scan
engine using red laser beam to scan
1D/2D barcodes.
WIFI CONNECTION
06
C70 has adopted Andriod 6.0 OS, it
can be operated as smartphone.
WIFI connection can be adjusted by
general setup option.
NFC is a convenient, secure, wireless connection
technology can achieve rapid communication for
payment, ticketing, electronic ticket, smart media,
data exchange and transmission functions.
Go settings → Wireless and networks →
More ,open NFC and Android Beam，then 2 NFC
devices could proceed data communication. For
more NFC functions , need third party software.
USB related precautions：
•Please connect to the USB port on the back of the PC.
• Please do not use USB extension line or USB hub.
• Please do not share with other USB devices.
Battery related precautions:
•Please charge the battery only with original adapter.
• If the battery is unused for an extended period, the
over discharge situation will lead to the decrease of
CHARGE
04
Type-C
Use the adapter connected to
Type-C cable to C70 device
to charge.
Iris light
1
Iris camera
2
Menu Button
3
Light sensor, distance sensor
4
Home Button
5
Scan Engine
6
Back Camera
7
Iris camera (rear)
8
Iris light
9
Scan Button
10
Micro SD
card
SIM Card
Card rack slot
11
Flash Light
12
Power
13
Insert the SIM tray ejector to pin slot as the
direction shared below，after push the slot will
move upward and the SIM card slot and SD card
slot will be available .
Power Button
Scan Button
C70
HANDHELD COMPUTER
QUICK GUIDE
WiFi
NFC
07
C70 can be connected
with PC or laptop through
USB port for synchroniza-
tion. There are three
options can be selected
for user's requirement.
USB CONNECTION
08
battery capacity and battery life, the increase of the
internal resistance, and battery bulge etc.
• If the battery is unused for an extended period, to
avoid over discharge, please keep the battery level
at 40% to 60% and store at room temperature. And
charge the battery once every 3 months.
• If the storage time is more than one year, one
charge cycle to activate the battery every year is
recommended.
(One charge cycle is a period of use from fully
charged, to fully discharged, and fully recharged
again.)
• The estimated life of the battery is 300 charge
cycles, after reaching this limit, the capacity is
expected to shrink.
2
3
4
6
7
8
9
12
1
2
1
1
1
5
11
10
13
14
14
15
NFC
15
Setup
14
双面四色印刷 尺寸A4 (297x210mm) 三折页 双面四色印刷 尺寸A4 (297x210mm) 三折页