Channel Master CM-0068DSB User manual

Screws (provided)
“OUT” to TV
AC Plug
“IN” from antenna
NOTE: Power supply must be wall
mounted onto surfaces with a 1/4”
minimum thickness
ANTENNA
LEAD IN WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ELECTRIC
SERVICE
EQUIPMENT
GROUND
CLAMP
PRECAUCIÓN
RIESGO DE CHOQUE ELÉCTRICO
NO ABRA
ANTENNA
ATTIC
4-WAY SPLITTER POWER SUPPLY
BEDROOMBEDROOM
DEN OR KITCHEN
LIVING ROOM
TV OR FM
SPLITTER
“O” dB WALL OUTLET
(TYPICAL)
FM STEREO
TV
TVTV
TV
PREAMP
Fig 3
Fig 1
Fig 2

In Warranty / Out of Warranty / Credit Procedure Effective Immediately
90-day warranty applies to all Channel Master Products* Dealers & Consumers: Dealers and consumers can return any In-Warranty Channel Master product to the
Warranty department for repair or replacement. For In-Warranty service the consumer or dealer must call Technical Service and request an RMA number in order to
return the product. The returned product must have the RMA number visible on the box and must include the bill of sale showing the unit is within the warranty period. If
the unit is found to be defective under our Warranty Policy Channel Master will repair or replace the item at no charge. Products outside of the warranty period should
not be returned to Channel Master with the exception of any product requested by Technical Support to be accessed for quality assurance purposes.
+1.877.746.7261 Channel Master, Consumer Warranty RMA # ----, 2260 West Broadway Road, Mesa, AZ 85202 * Some products have extended
term warranty periods Effective Immediately Subject to the provisions of this Warranty, CHANNEL MASTER warrants that the
equipment and software described in Paragraph 1.2 will conform to our specications in all material respect and that the equipment will be free from material defects in
materials and workmanship during the Limited Warranty period. This Warranty applies to all original purchases by Customers of CHANNEL MASTER
(“Equipment”).The warranties set forth herein are not transferable. The Effective period of this Warranty will start on the date of purchase of the Equipment or the
date of installation by a CHANNEL MASTER approved technician and will end, for the Equipment, ninety (90) days later (for all component parts and system upgrades),
unless otherwise expressed or provided herein (in each case the “Warranty Period”). If an item of Equipment
malfunctions or fails in normal use within the applicable Warranty Period: the Customer shall notify CHANNEL MASTER within thirty (30) days of the problem.
CHANNEL MASTER will, at its option, either resolve the problem over the telephone or provide the customer with a Return Authorization (“RMA”) Number and the
address to which the customer may ship the defective item; If the problem can not be resolved over the telephone, the Customer shall attach a label showing the
RMA number to each returned item, and include a description of the problem. The Customer shall, at his or her own cost, properly pack the item to be returned, mark
the RMA# on the outside of the box, prepay the insurance and shipping charges, and ship the item to the specied CHANNEL MASTER location. Unauthorized
return of any equipment, whether in or out of warranty, will be subject to a handling charge, in addition to all repair and all transportation charges. CHANNEL
MASTER will, at its sole option, repair or replace the returned item. If replaced, the replacement item may be new or refurbished; if refurbished it will be equivalent in
operation to new Equipment. If a returned item is replaced by CHANNEL MASTER, the Customer agrees that the returned item will become the property of CHANNEL
MASTER. CHANNEL MASTER will complete the exchange of CHANNEL MASTER manufactured equipment returned under this Warranty within a reasonable time,
subject to lead-times from factory, and will make a good faith effort to minimize any and all delays where possible; and CHANNEL MASTER will, at its cost, ship the
repaired item or replacement to the Customer. If the Customer requests express shipping, the Customer will pay CHANNEL MASTER an expediting fee. Equipment
which is repaired or replaced by CHANNEL MASTER under this Warranty will be covered under all of the provisions of this Warranty for the remainder of the applicable
Warranty period (for that particular equipment) from the date of repair or replacement, whichever is longer. If equipment is repaired beyond effective warranty dates
or if abnormal usage had occurred, Customer shall be charged applicable rates and the Customer will be advised of the estimated charges prior to repair by CHANNEL
MASTER ‘s authorized service center. The price of out-of-warranty repairs payable by the Customer will be based on standard labor and parts prices in effect at the
time of the repair. CHANNEL MASTER will use its best efforts to ensure that the cost of such repair, exchange, refurbishing, or substitution will not exceed the original
price of Product. If the problem reoccurs within the warranty period, CHANNEL MASTER will, at its option: re-perform the service; replace the product
pursuant to the terms of this warranty, permit Customer to return the product and issue a refund pursuant to this warrant, or refund the amount the Customer paid
for the services. CHANNEL MASTER reserves the right to make changes or improvements to its products, during subsequent
production, without incurring the obligation to install such changes or improvements on previously manufactured or sold products. CHANNEL
MASTER will not be liable if its performance under this warranty becomes commercially impracticable due to any contingency beyond CHANNEL MASTER’s reasonable
control, including acts of God, res, ood, wars, sabotage, civil unrest, accidents, labor disputes or shortages, government laws, rules and regulations, whether valid or
invalid, inability to obtain material, equipment or transportation, incorrect, delayed or incomplete specications, drawings or data supplied by Customer (collectively
“Force Majeure”) This Limited Warranty extends only to the original purchaser of the Equipment and is in
lieu of all other express or implied warranties, including those of merchantability and tness for a particular purpose. This Warranty does not apply to any damage,
defect of failure caused by: any part of the equipment having been modied, adapted, repaired, maintained, transported or relocated by any person; Storage or
environmental characteristics which do not conform to the applicable sections of the appropriate Equipment Manual or Instruction Sheet; Failure to conform with the
Equipment Operating Instructions in the applicable Equipment Manual or Instruction Sheet; External causes, including external electrical stress or lightning, or use
in conjunction with incompatible equipment, unless such use was with CHANNEL MASTER’s prior written request; Cosmetic damage; Accidental damage,
negligence, modication, mishandling, abuse or misuse; or Force Majeure. THIS WARRANTY IS THE CUSTOMER’S
EXCLUSIVE WARRANTY FOR THE EQUIPMENT, CHANNEL MASTER SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING ANY WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND OF MERCHANTABILITY. CHANNEL MASTER WILL NOT BE
LIABLE IN TORT, INCLUDING LIABILITY IN NEGLIGENCE OR STRICT LIABILITY, AND WILL HAVE NO LIABILITY AT ALL FOR INJURY TO PERSONS OR
PROPERTY. CHANNEL MASTER’S LIABILITY FOR FAILURE TO FULFILL ITS OBLIGATIONS UNDER THIS WARRANTY OR ANY OTHER LIABILITY UNDER OR IN
CONNECTION WITH THE EQUIPMENT WILL BE LIMITED TO THE AMOUNT OF THE PURCHASE PRICE OF THE EQUIPMENT AT THE TIME OF ORIGINAL
PURCHASE. THE REMEDIES STATED IN THIS WARRANTY ARE THE CUSTOMER’S EXCLUSIVE REMEDIES AGAINST CHANNEL MASTER REGARDING THE
EQUIPMENT. EVEN IF CHANNEL MASTER HAS BEEN NOTIFIED OF THE POSSIBILITY OF THEM, CHANNEL MASTER WILL NOT BE LIABLE FOR ANY
INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, INCLUDING LOST PROFITS AND REVENUES, FAILURE TO REALIZE EXPECTED
SAVINGS, ANY CLAIM AGAINST A CUSTOMER BY A THIRD PARTY, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSSES OF ANY KIND. THESE
LIMITATIONS AND DISCLAIMERS ARE NOT MADE BY CHANNEL MASTER WHERE PROHIBITED BY LAW.
Other Channel Master Amplifier manuals

Channel Master
Channel Master Amplify User manual

Channel Master
Channel Master CM-3410 User manual

Channel Master
Channel Master CM-7777 User manual

Channel Master
Channel Master TITAN 2 Series User manual

Channel Master
Channel Master TITAN 2 Series User manual

Channel Master
Channel Master CM-7777HD User manual

Channel Master
Channel Master CM-3410 User manual

Channel Master
Channel Master Amplify+ User manual

Channel Master
Channel Master CM-3410 User manual

Channel Master
Channel Master CM-3410 User manual