Charge IT CH-4336 User manual
"רותפכ" לוקמרButton Bluetooth CH-4336
)םיכישממ םתאש ינפל םירבדה תא וארק( תוארוה ךירדמ
:קפסה
USBUSB
USB
תועצמאב הקיסומ תניגנתוטולב’
ON
Button CH-4336
:תוארתה
2
CH-4336 Bluetooth Speaker
Instruction Manual (Read before proceeding)
Power:
Works on internal rechargeable Lithium battery. Please charge your speaker fully
before first use.
Connect the speaker’s Micro USB socket with the power source’s USB port
through USB cable.
A red light will indicate the charging situation. When battery is full, the red light
will turn off automatically.
Disconnect the USB cable when it is fully charged.
Playing Music Via Bluetooth
Turn on Bluetooth speaker by sliding power switch on the back side to “On ”
position.
The blue indicator light will flash quickly. This indicates that speaker entering
Bluetooth Pairing mode.
Turn on the Bluetooth function on your device, search the speaker named “Button
CH-4336” and select it, your device will pair without a password. (If required,
enter the password “0000” to finalize the paring).The Blue light will begin to flash
slowly after pair is complete.
Start playing music on your device. Keep your device within 33feet (10 meters) of
your speaker.
Turn off the unit when not in used.
Caution:
This is not a toy. Please keep away from small children.
Please keep away from water / heat.
Low power may cause poor connection even no working of Bluetooth.
Do not over-charge the battery.
Battery pack shall not be exposed to excessive heat such as sunshine, fire or the
like
Table of contents
Languages:
Other Charge IT Speakers manuals
