2
Caution
1. Please match the correct Lithium-ion rechargeable battery for this charger, which is only manufacture by
Kilews. Do not apply different type or brand of battery on this charger, otherwise may cause error or
danger.
2. Please match the charger with the battery models.
3. SKC-LB1025S. The use of other than genuine KILEWS replacement parts or battery may result in
decreased tool performance and increased maintenance, and may invalidate all warranties.
3. Keep children, and bystanders away while charging the battery, in case of danger.
4. Please do not plug in the charger when the plug or users’ hand is wet.
5. To disassemble or modify the charger’s plug may cause danger or malfunction.
6. This charger only applies to the rechargeable battery of Kilews. Please do not apply the charger to other
different brand of battery or for other propose.
7. Please do not attempt to disassemble or modify the charger and the rechargeable battery.
8. USB jack: To update the firmware and maintenance only, users can not use this function.
Operation Instruction
1. Please check the cord to see if there any damage before plug in the charger. Hold the plug of power cord
while plugging in or unplugging charger.
2. Do not place chargers near oil, chemical materials or heated objects, also please be alert not to scratch the
power cord by sharp object.
3. When the charger is not in use, please unplug the power and store in dry safe place where it is not reachable
by children.
4. Charger and battery assemble
SKC-P50WN-S
SKC-P50WN-E
(1).The direction of
battery when removing.
(2).Decomposition steps finished.
(2).Assemble steps finished.
(1).The direction of the battery
when insert, push all the way.
(1).The direction of
battery when removing.
(2).Decomposition steps finished.
(2).Assemble steps finished.
(1).The direction of the battery
when insert, push all the way.
