ClipperCreek ProMountDuo PMD-10R User manual
innovative infrastructure for
electric and hybrid vehicles
RUGGEDIZED
ProMountDuo™ (PMD-10R)
PEDESTAL INSTALLATION GUIDE
ClipperCreek,Inc.
Page 2
RUGGEDIZED ProMountDuo™ PEDESTAL INSTALLATION GUIDE
ClipperCreek, Inc.
PLEASE NOTE
This user’s manual includes the latest information at the time of printing.
ClipperCreek, Inc. reserves the right to make changes to this product without further notice. Changes or
TESLA®and ®are registered trademarks of TESLA®Motors, Inc. and are used under license.
TESLA®
Customer Support section located in this guide.
All rights reserved. Printed in the USA.
Product Number: 7004-0021
Please visit ClipperCreek’s website @ www.clippercreek.com
Page 3
RUGGEDIZED ProMountDuo™ PEDESTAL INSTALLATION GUIDE
ClipperCreek,Inc.
TABLE OF CONTENTS
..................................................................................................
.................................................................................................................................... 5
.......................................................
.....................................................................................................................................
............................................................................................................
......................................................................................
.......................................................................................................
..............................................................................................
TESLA® ................................................................................................ 29-33
...............................................................................................
..............................................................................................................................35
..................................................................................................................
RUGGEDIZED ProMountDuo™ PEDESTAL INSTALLATION GUIDE
ClipperCreek,Inc.
IMPORTANT SAFETY INSTRUCTIONS
Note to the Installer
Note to the User
The TESLA®
•
electrical codes and ordinances.
•
ordinances.
•
•
Page 5
RUGGEDIZED ProMountDuo™ PEDESTAL INSTALLATION GUIDE
ClipperCreek,Inc.
TOOLS REQUIRED FOR ASSEMBLING THE RUGGEDIZED
ProMountDuo™ PEDESTAL WITH CLIPPERCREEK HCS,
LCS/ACS, OR TESLA®EVSE
•
•
•
•
• Level
• Tape Measure
•
• REQUIRED IF INSTALLING LCS/ACS AND TESLA®EVSE
• TESLA®
•
•
CONFIGURATIONS AND INSTALLATION REQUIREMENTS
TM
CONFIGURATION A: Figure 1
CONFIGURATION B: Figure 1
CONFIGURATION C: Figure 2
CONFIGURATION D: Figure 2
CONFIGURATION E:
Figure 1 and Figure 2
CONFIGURATION F: Single TESLA®Figure 3
CONFIGURATION G: ®Figure 3
CONFIGURATION H: ®
Figure 1 and Figure 3
CONFIGURATION I: ®
Figure 2 and Figure 3
RUGGEDIZED ProMountDuo™ PEDESTAL INSTALLATION GUIDE
ClipperCreek,Inc.
HCS EVSE SINGLE AND DUAL MOUNT CONFIGURATIONS & DIMENSIONS
(If Single Mount)
(If Dual Mount) (HCS Single Mount) (HCS Dual Mount)
CONFIGURATIONS AND INSTALLATION REQUIREMENTS
RUGGEDIZED ProMountDuo™ PEDESTAL INSTALLATION GUIDE
ClipperCreek,Inc.
LCS/ACS EVSE SINGLE AND DUAL MOUNT CONFIGURATIONS & DIMENSIONS
(If Single Mount)
(If Dual Mount)
(Optional GFCI Outlets)
CONFIGURATIONS AND INSTALLATION REQUIREMENTS
RUGGEDIZED ProMountDuo™ PEDESTAL INSTALLATION GUIDE
ClipperCreek, Inc.
Figure 3
TESLA®EVSE SINGLE AND DUAL MOUNT CONFIGURATIONS & DIMENSIONS
(varies with cable wrap method) (TESLA® Single Mount) (TESLA®Dual Mount)
Approx. 19-22”
CONFIGURATIONS AND INSTALLATION REQUIREMENTS
Page 9
RUGGEDIZED ProMountDuo™ PEDESTAL INSTALLATION GUIDE
ClipperCreek,Inc.
CONFIGURATION A:
Required Equipment for a Single-Mount Pedestal with one
ClipperCreek HCS EVSE (One EVSE per Pedestal):
•
•
and options selected.
•
•
•
•
•
•
CONFIGURATION B:
Required Equipment for a Dual-Mount Pedestal with two
ClipperCreek HCS EVSE (Two EVSE per Pedestal):
•
•
amperage and options selected.
•
•
•
•
•
•
CONFIGURATION A
CONFIGURATION B
Single ClipperCreek
HCS EVSE
Dual ClipperCreek
HCS EVSE
CONFIGURATIONS AND INSTALLATION REQUIREMENTS
RUGGEDIZED ProMountDuo™ PEDESTAL INSTALLATION GUIDE
ClipperCreek,Inc.
CONFIGURATIONS AND INSTALLATION REQUIREMENTS
CONFIGURATION C
CONFIGURATION C:
Required Equipment for a Single-Mount Pedestal with one
ClipperCreek LCS/ACS EVSE (One EVSE per Pedestal):
•
•
amperage and options selected.
•
selected.
•
•
•
•
•
CONFIGURATION D:
Required Equipment for a Dual-Mount Pedestal with two
ClipperCreek LCS/ACS EVSE (Two EVSE per Pedestal):
•
•
amperage and options selected.
•
selected.
•
•
•
•
•
CONFIGURATION D
Single ClipperCreek
LCS/ACS EVSE
Dual ClipperCreek
LCS/ACS EVSE
RUGGEDIZED ProMountDuo™ PEDESTAL INSTALLATION GUIDE
ClipperCreek,Inc.
CONFIGURATIONS AND INSTALLATION REQUIREMENTS
CONFIGURATION E:
Required Equipment for a Combo Dual-Mount Pedestal with one HCS
EVSE and one LCS/ACS EVSE (Two EVSE per Pedestal):
•
•
and options selected.
•
amperage and options selected.
•
options selected.
•
•
Each conductor must have enough length
•
•
•
Combo ClipperCreek HCS
and LCS/ACS EVSE
CONFIGURATION E
RUGGEDIZED ProMountDuo™ PEDESTAL INSTALLATION GUIDE
ClipperCreek, Inc.
* Consult the TESLA®Wall Connector Manual if selecting the TESLA®Load Sharing Option.
CONFIGURATION F:
Required Equipment for a Single-Mount Pedestal with one
TESLA®EVSE (One EVSE per Pedestal):
•
• ®®
•
•
•
•
•
•
CONFIGURATION G:
Required Equipment for a Dual-Mount Pedestal with two
TESLA®EVSE (Two EVSE per Pedestal):
•
• ®®
•
•
• -
•
•
•
Single TESLA® EVSE
Dual TESLA® EVSE
CONFIGURATION G
CONFIGURATIONS AND INSTALLATION REQUIREMENTS
CONFIGURATION F
RUGGEDIZED ProMountDuo™ PEDESTAL INSTALLATION GUIDE
ClipperCreek,Inc.
CONFIGURATION H:
Required Equipment for a Combo Dual-Mount Pedestal with one HCS EVSE and
one TESLA®EVSE (Two EVSE per Pedestal):
•
•
options selected.
• ®®
•
selected.*
•
•
•
•
•
CONFIGURATION I:
Required Equipment for a Combo Dual-Mount Pedestal with one ClipperCreek
LCS/ACS and one TESLA®EVSE (Two EVSE per Pedestal):
•
•
options selected.
• ®®
•
selected.*
•
•
•
•
•
Combo TESLA® EVSE
and ClipperCreek
HCS EVSE
CONFIGURATION H
Combo TESLA® EVSE
and ClipperCreek
LCS/ACS EVSE
CONFIGURATION I
CONFIGURATIONS AND INSTALLATION REQUIREMENTS
* Consult the TESLA®Wall Connector Manual if selecting the TESLA®Load Sharing Option.
RUGGEDIZED ProMountDuo™ PEDESTAL INSTALLATION GUIDE
ClipperCreek,Inc.
PACKING LIST
0300-00-026 Ruggedized ProMountDuo™ Pedestal Kit
ITEM PART
REFERENCE NUMBER QTY DESCRIPTION
NOTE:
RUGGEDIZED ProMountDuo™ PEDESTAL INSTALLATION GUIDE
ClipperCreek,Inc.
TESLA®
TESLA®
TESLA®
HARDWARE
RUGGEDIZED ProMountDuo™ PEDESTAL INSTALLATION GUIDE
ClipperCreek, Inc.
OPTIONAL ORDERABLE ITEMS
120V GFCI Kit (0300-06-000)
EVSE Tester (CP-50 0500-03-000)
present.
•
•
• Simulate a ground fault
•TM
on each pedestal for added convenience.
.
.
RUGGEDIZED ProMountDuo™ PEDESTAL INSTALLATION GUIDE
ClipperCreek,Inc.
INITIAL PEDESTAL INSTALLATION
1. CONCRETE PAD REQUIREMENTS
The location, dimensions, and composition of
following dimensions are minimum recommended
proceeding.
a.
side.
c.
d.
e. ATTENTION: Pull wires an extra 5
feet from conduit in order to facilitate
installation.
2. ANCHOR BOLT PLACEMENT
purposes of securing the pedestal post. The
rectangular pattern as shown in Figure 6.
c.
not included in the pedestal kit and must
RUGGEDIZED ProMountDuo™ PEDESTAL INSTALLATION GUIDE
ClipperCreek, Inc.
INITIAL PEDESTAL INSTALLATION
3. MOUNT THE PEDESTAL BASE
(A)
a.
through the inside of the large center
(A). The
to prevent water accumulation.
c.
into place.
d.
in Figure 7.
e.
f. Tighten the Anchor Bolts as much as
possible. See Figure 8
and repeat steps 3e & 3f as needed.
g. Verify that the Anchor Bolts are
tightened as much as possible.
RUGGEDIZED ProMountDuo™ PEDESTAL INSTALLATION GUIDE
ClipperCreek,Inc.
INITIAL PEDESTAL INSTALLATION
4. INSTALL THE BOTTOM PANELS
Leave all screws slightly loose
for alignment purposes until
instructed to tighten at the end of
this section.
a. (I) around the
(E).
(H) around the
(G), as
(F).
c.
screw and washer sets (F) & (H).
d. Align the screw holes on the front of
(B) with the
corresponding screw holes on the
(A),
making sure that the plug is on the
top side.
e.
(B)
washer sets (G) & (H)
Figure 9.
Do not fully tighten.
f.
(B)narrow edges
Panel.
g.
T25 screw and washer sets (E) &
(I) as shown in Figure 11. Do not
fully tighten.
h.
washer sets (G) & (H) as shown in Figure 11.
Do not fully tighten.
RUGGEDIZED ProMountDuo™ PEDESTAL INSTALLATION GUIDE
ClipperCreek,Inc.
5. HCS EVSE INSTALLATIONS ONLY:
The HCS Service Access hole and HCS Plug
(P)
following steps at this time.
(P)
Panel (B) on the side to which the HCS
sure the sealing washer is on the outside
of the pedestal end of the conduit as shown in
Figure 13.
is desired, repeat on the opposite side
of the pedestal.
INITIAL PEDESTAL INSTALLATION
TESLA®
Service
Access Hole
& Plug
Optional
TESLA®
Signal
Access
Hole & Plug
after (C) is installed
Table of contents
Other ClipperCreek Batteries Charger manuals
ClipperCreek
ClipperCreek LCS Series User manual
ClipperCreek
ClipperCreek ProMountDuo PMD-10T User manual
ClipperCreek
ClipperCreek CS-40 User manual
ClipperCreek
ClipperCreek HCS User manual
ClipperCreek
ClipperCreek HCS SERIES User manual
ClipperCreek
ClipperCreek CS-100 User manual
ClipperCreek
ClipperCreek HCS SERIES User manual
ClipperCreek
ClipperCreek HCS SERIES User manual
ClipperCreek
ClipperCreek LCS Series User manual
ClipperCreek
ClipperCreek CS 3-Phase User manual
