Chatsworth Products Z4 Series User manual

Z4-SERIES SEISMICFRAME PDU BRACKET
IIS-714480, 01/7/14, Rev. 1, CPI/BMO
800-834-4969 (USA & Canada) • www.chatsworth.com • [e-mail]
For international phone numbers, see our website or contact CPI Tech Support.
This drawing contains proprietary and confidential information and is protected by U.S. and international law. Unauthorized reproduction, disclosure or use of the drawing
or the information therein is expressly forbidden except as agreed to in writing by Chatsworth Products, Inc.
Page 1 of 2
Installation Instructions
Safety Information
WARNING: Improper use of this product may lead to serious
injury. Read and understand all instructions for proper
installation and use of this product.
WARNING: When installing PDU, ensure power cords are routed
and secured to prevent risk of cord getting pinched.
Included Hardware:
M6 X 20mm Taptite FHCSK TORX Screw, 8 ea.
Tools Required:
T30 Torx driver
Installation Instructions
The PDU Bracket assembly (Fig. 1) attaches to the cabinets slides.
Fig. 1
PDU BRACKET.
PDU adapter
bracket
PDU mounting
bracket
M6 X 20mm
Taptite FHCSK
TORX Screw
Punched arrow
Fig. 2

Z4-SERIES SEISMICFRAME PDU BRACKET
Page 2 of 2
Installation Instructions
1. Position the PDU Adapter Bracket at the desired location along the
cabinet slides. Fasten bracket using M6 X 20mm Taptite FH into the top
and bottom slides (Fig. 3, detail). Torque to 168 in-lb (19 N-m).
2. Align the PDU bracket to the adapter bracket in the correct orientation.
The top of the bracket is indicated by a punched arrow (Fig. 2, detail).
3. Fasten the PDU Bracket using M6 X 20mm Taptite FH into adapter
bracket (Fig. 4, detail). Torque to 168 in-lb (19 N-m).
Slides
Front side
of the
cabinet
M6 X 20mm
Taptite FHCSK
TORX Screw
Slides
PDU adapter
bracket
PDU adapter
bracket
M6 X 20mm
Taptite FHCSK
TORX Screw
Fig. 3
Adapter Bracket Installation
Slides
M6 X 20mm
Taptite FHCSK
TORX Screw
PDU mounting
bracket
Slides
PDU mounting
bracket
M6 X 20mm
Taptite FHCSK
TORX Screw
Fig. 4