Chauvet Professional Maverick Storm 1 Wash User manual

User Manual

Maverick Storm 1 Wash User Manual Rev. 1
Edition Notes
The Maverick Storm 1 Wash User Manual includes a description, safety precautions, installation,
programming, operation and maintenance instructions for the Maverick Storm 1 Wash as of the release
date of this edition.
Trademarks
CHAUVET, the Chauvet logo and Maverick Storm 1 Wash are registered trademarks or trademarks of
Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries.
Other company and product names and logos referred to herein may be trademarks of their respective
companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited to, all design, text and images
are owned by Chauvet.
© Copyright 2018 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information purposes
only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this
manual or its content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4
paper (210 x 297 mm), configure the printer to scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should completely read through the guide
that shipped with the product, as well as this manual, before installing, operating, or maintaining this
product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetprofessional.com.
Document Revision
This Maverick Storm 1 Wash User Manual is the 1
st
edition of this document. Go to
www.chauvetprofessional.com for the latest version.

Maverick Storm 1 Wash User Manual Rev. 1
Table of Contents
i
TABLE OF CONTENTS
1. Before You Begin ....................................................................... 1
What Is Included ........................................................................................... 1
Claims ........................................................................................................... 1
Manual Conventions ..................................................................................... 1
Symbols ........................................................................................................ 1
Safety Notes.................................................................................................. 2
Personal Safety.................................................................................................. 2
Mounting and Rigging ........................................................................................ 2
Power and Wiring............................................................................................... 2
Operation ...................................................................................................... 2
Expected LED Lifespan................................................................................. 2
2. Introduction ................................................................................ 3
Description .................................................................................................... 3
Features........................................................................................................ 3
Product Overview.......................................................................................... 3
Product Dimensions ...................................................................................... 4
3. Setup ........................................................................................... 5
AC Power...................................................................................................... 5
AC Plug .............................................................................................................. 5
Power Linking..................................................................................................... 5
Fuse Replacement ............................................................................................. 5
Remote Device Management (RDM) ............................................................ 5
Mounting ....................................................................................................... 6
Orientation.......................................................................................................... 6
Rigging ............................................................................................................... 6
Mounting Diagram............................................................................................. 6
Signal Connections ....................................................................................... 7
Art-Net™ Connection ......................................................................................... 7
sACN Connection............................................................................................... 7
Kling-Net Connection ......................................................................................... 7
Connection Diagram .......................................................................................... 7
4. Operation .................................................................................... 8
Control Panel Description ............................................................................. 8
Menu Map ..................................................................................................... 8
Protocol Configuration................................................................................... 12
Control Personalities .......................................................................................... 12
Single Control..................................................................................................... 13
Single Control Protocol ..................................................................................... 13
Single Control Personality................................................................................. 13
Single Control Start Address............................................................................. 13
Single Control Universe .................................................................................... 13
Dual Control ....................................................................................................... 14
Dual Control Movement .................................................................................... 14
Dual Control Movement Protocol ...................................................................... 14
Dual Control Movement Personality.................................................................. 14
Dual Control Movement Start Address.............................................................. 14
Dual Control Movement Universe ..................................................................... 14

Table of Contents
Maverick Storm 1 Wash User Manual Rev. 1
ii
Dual Control Pixels............................................................................................ 15
Dual Control Pixels Protocol ............................................................................. 15
Dual Control Pixels Personality......................................................................... 15
Dual Control Pixels Start Address..................................................................... 15
Dual Control Pixels Universe ............................................................................ 15
Zones for Pixel Control.................................................................................. 16
Single Control Values.................................................................................... 16
Single Control: Tour Mode (216-channel) .......................................................... 16
Single Control: Advanced Mode (178-channel) ................................................. 22
Single Control: Standard Mode (96-channel)..................................................... 27
Single Control: Basic Mode (20-channel)........................................................... 31
Dual Control Values ...................................................................................... 34
Dual Control Movement ..................................................................................... 34
Dual Control: Advanced Movement Mode (26-channel) ................................... 34
Dual Control: Standard Movement Mode (20-channel)..................................... 36
Dual Control: Basic Movement Mode (8-channel) ............................................ 39
Dual Control Pixels............................................................................................. 41
Dual Control: Advanced Pixels Mode (152-channel) ........................................ 41
Dual Control: Standard Pixels Mode (76-channel)............................................ 44
Dual Control: Basic Pixels Mode (57-channel).................................................. 45
Operating Settings Configuration .................................................................. 47
Home Screen ..................................................................................................... 47
Test Mode .......................................................................................................... 47
Auto Test........................................................................................................... 47
Manual Test ...................................................................................................... 47
Setup.................................................................................................................. 47
Network Settings ............................................................................................... 47
IP Mode............................................................................................................. 47
IP Address......................................................................................................... 48
Subnet Mask ..................................................................................................... 48
Pan/Tilt Orientation ........................................................................................... 48
Zoom Orientation .............................................................................................. 48
Display Orientation............................................................................................ 48
Pan/Tilt Angle Range ........................................................................................ 49
Blackout on Pan/Tilt Movement ........................................................................ 49
Lock Screen ...................................................................................................... 49
Swap Pan and Tilt ............................................................................................. 49
WDMX Reset .................................................................................................... 49
Backlight Timer ................................................................................................. 50
Loss of Data ...................................................................................................... 50
Fan Speed......................................................................................................... 50
Color Mixing Mode ............................................................................................ 50
Dimmer Curve ................................................................................................... 50
Dimmer Speed .................................................................................................. 50
Pulse Width Modulation .................................................................................... 51
Color Balance.................................................................................................... 51
Preset Functions ............................................................................................... 51
Reset Functions ................................................................................................ 51
Factory Reset.................................................................................................... 51
System Information ............................................................................................ 52

Maverick Storm 1 Wash User Manual Rev. 1
Table of Contents
iii
Offset Mode................................................................................................... 52
Web Server ................................................................................................... 53
Firmware Update............................................................................................... 53
5. Technical Information ................................................................ 54
Product Maintenance .................................................................................... 54
6. Technical Specifications ........................................................... 55
Photometrics Charts...................................................................................... 56
Returns............................................................................................ 57
Contact Us ...................................................................................... 58

Page 1 of 58
Before You Begin
Maverick Storm 1 Wash User Manual Rev. 1
1. Before You Begin
What Is Included
Claims
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Manual Conventions
Symbols
• Maverick Storm 1 Wash
• Seetronic Powerkon IP65 Power Cord
• 2 Omega Brackets with Mounting Hardware
• Quick Reference Guide
Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
<SET> A button on the product’s control panel
Settings A product function or a menu option
Symbol Meaning
Electrical warning. Not following these instructions may cause electrical damage to
the product, accessories, or the user.
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function
correctly if this information is not used.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A
digital data transmission protocol.

Page 2 of 58
Maverick Storm 1 Wash User Manual Rev. 1
Before You Begin
Safety Notes
Read all the following safety notes before working with this product. These notes contain important
information about the installation, usage, and maintenance of this product.
Personal Safety
• Avoid direct eye exposure to the light source while the product is on.
• Always disconnect the product from the power source before cleaning or replacing the fuse.
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Do not touch the product’s housing when operating because it may be very hot.
Mounting and Rigging
• Do not submerge this product (IP65). Temporary outdoor operation is fine.
• When using this product in an outdoor environment, use IP65 (or higher) rated power and data
cables. Secure unused power and data ports with attached IP65 covers.
• CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm,
humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a
failure, allow product to fully acclimate to the surrounding environment before connecting it to power.
• Not for permanent outdoor installation in locations with extreme environmental conditions. This
includes, but is not limited to:
• Exposure to a marine/saline environment (within 3 miles of a saltwater body of water).
• Locations where the normal high or low temperatures exceed the temperature ranges in this
manual.
• Locations that are prone to flooding or being buried in snow.
• Areas where the product will be subjected to extreme radiation or caustic substances.
• Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent
surfaces.
• Make sure there are no flammable materials close to the product when operating.
• When hanging this product, always secure to a fastening device using a safety cable.
Power and Wiring
• Always make sure you are connecting the product to the proper voltage in accordance with the
specifications in this manual or on the product’s specification label.
• Never connect the product to a dimmer pack or rheostat.
• Never disconnect this product by pulling or tugging on the power cable.
Operation
• Do not operate this product if there is damage on the housing, lenses, or cables. Have the damaged
parts replaced by an authorized technician at once.
• Do not cover the ventilation slots when operating to avoid internal overheating.
• The maximum ambient temperature is 113 °F (45 °C). Do not operate the product at higher temperatures.
• The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.
• The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower temperatures.
• In the event of a serious operation problem, stop using this product immediately!
Expected LED Lifespan
LEDs gradually decline in brightness over time, primarily because of heat. LEDs that are arranged in
clusters experience higher operating temperatures than single LEDs. For this reason, operating clustered
LEDs at their fullest intensity significantly reduces the LEDs’ lifespan. Under normal conditions, this
lifespan is 40,000 to 50,000 hours. If extending this lifespan is vital, lower the operating temperature by
improving the ventilation around the product, thus reducing the ambient temperature. In addition, limiting
the overall projection intensity may extend the LEDs’ lifespan.
This product contains no user-serviceable parts. Any reference to servicing in
this User Manual will only apply to properly trained, certified technicians. Do not
open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this
product.
If your Chauvet product requires service, contact Chauvet Technical Support.

Page 3 of 58
Introduction
Maverick Storm 1 Wash User Manual Rev. 1
2. Introduction
Description
The Maverick Storm 1 Wash is a powerful, IP65-rated RGBW Osram LED moving head. It features a
compact and rugged die-cast aluminum housing built with 316 stainless steel screws to withstand even the
harshest elements. With an output of 6,000 lumens, its customized optics are well suited for audience and
aerial washing, even at larger venues. Pixel-mapping effects and a massive zoom range further add to the
unit’s versatility; and a virtual gobo wheel with background colors creates an array of immersive
atmospheric effects. The RDM-enabled unit features 16-bit dimming and can be controlled via DMX, W-
DMX, sACN, and Art-Net™.
Features
• Fully featured IP65 rated RGBW LED yoke wash fixture with pixel mapping and zoom
• 16-bit dimming of master dimmer as well as individual colors for smooth control of fades
• Built-in colors for quick design possibilities
• Built-in virtual gobo wheel with background colors for impressive atmospheric effects
• Precise movement of pan, tilt, and zoom
• Quiet operation for a wide range of installation situations, both indoor and outdoor
• DMX, W-DMX, S ACN, Art-Net, and Kling-Net control for full flexibility
• RDM Enabled for remote addressing and trouble shooting
• 11° - 42° Zoom angle for variable beam sizes
• True 1 compatible power input/output.
• Battery backup display with auto rotate depending on fixture orientation
• Three setup menu presets and preset sync for cross loading to multiple like-fixtures for easy shop
setup
Product Overview
Yoke
Moving Head
OLED Display 5-pin DMX
Out/In
Menu
Buttons
Network
In/Out
Ports
Antenna
Carrying
Handles
Feet (x4)
Fuse
Holder
Seetronic
Powerkon In/Out

Page 4 of 58
Maverick Storm 1 Wash User Manual Rev. 1
Introduction
Product Dimensions
7.52 in
191 mm
6.5 in
165 mm
12.5 in
319 mm
18.77 in
477 mm
4.76 in
121 mm
11.02 in
280 mm
15.55 in
395 mm
16.3 in
414 mm
5.51 in
140 mm

Page 5 of 58
Setup
Maverick Storm 1 Wash User Manual Rev. 1
3. Setup
AC Power
Each Maverick Storm 1 Wash has an auto-ranging power supply that works with an input voltage range of
100 to 240 VAC, 50/60 Hz. To determine the power requirements for each Maverick Storm 1 Wash, refer to
the label affixed to the product. You can also refer to the Technical Specifications chart in this manual.
The listed current rating indicates the maximum current draw during normal operation. For more
information, download Sizing Circuit Breakers from the Chauvet website: www.chauvetprofessional.com.
.
AC Plug
The Maverick Storm 1 Wash comes with a power input cord terminated with a Seetronic Powerkon A
connector on one end and an Edison plug on the other end (U.S. market). If the power input cord that
came with your product has no plug, or if you need the change the plug, use the table below to wire the
new plug.
Power Linking
The product supports power linking. You can power link up to 3 products at 120 V; up to 6 at 208 V; or up
to 7 at 230 V.
This product comes with a power input cord. Power linking cables are available from Chauvet for purchase.
Fuse Replacement
1. Disconnect this product from the power outlet.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with another fuse of the same type and rating (F 20 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.
Remote Device Management (RDM)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate
bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the
manufacturer as not all DMX controllers have this capability. The Maverick Storm 1 Wash supports RDM
protocol that allows feedback to make changes to menu map options.
• Always connect the product to a protected circuit (circuit breaker or fuse). Make
sure the product has an appropriate electrical ground to avoid the risk of
electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green

Page 6 of 58
Maverick Storm 1 Wash User Manual Rev. 1
Setup
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
For our CHAUVET Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position and make sure there is adequate room for ventilation,
configuration, and maintenance. The Maverick Storm 1 Wash can be suspended upright or upside down
using the 2 Omega brackets included, or it can be placed on its rubber feet on a flat level surface.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
• When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
• The product is not intended for permanent installation.
• Make sure to mount this product away from any flammable material.
• Never mount in places where rain, high humidity, extreme temperature changes, or restricted
ventilation may affect the product.
• If hanging this product, make sure that the mounting location can support the product’s weight. See
the Technical Specifications for the weight-bearing requirements of this product.
• When hanging this product, always secure to a fastening device using a safety cable. For our
CHAUVET Professional line of safety cables, go to http://trusst.com/products/.
• When mounting the product on the floor, make sure that the product and cables are away from
people and vehicles.
• Place the Maverick Storm 1 Wash so that it can move freely without hitting anything or anybody.
• Leave enough slack on the cables to prevent tension and pull on the plugs.
Mounting Diagram
Omega Bracket
(x2)
Mounting Clamp
Overhead Mounting
Safety Cable
Floor Mounting
Feet (x4)

Page 7 of 58
Setup
Maverick Storm 1 Wash User Manual Rev. 1
Signal Connections
The Maverick Storm 1 Wash can receive DMX, WDMX, Art-Net™, sACN, or Kling-Net signal. The
Maverick Storm 1 Wash has 2 ethernet ports, and 5-pin DMX in and out ports.
For more information about DMX, read the DMX primer at: https://www.chauvetprofessional.com/wp-
content/uploads/2016/06/DMX_Primer.pdf.
For instructions on pairing the Maverick Storm 1 Wash with a WDMX transmitter, see WDMX Reset.
Art-Net™ Connection
Art-Net™ is an Ethernet protocol that uses TCP/IP which transfers a large amount of DMX512 data using
an ethernet connection over a large network. An Art-Net™ protocol document is available from
www.chauvetprofessional.com.
Art-Net™ designed by and copyright Artistic Licence Holdings Ltd.
sACN Connection
Also known as ANSI E1.31, streaming ACN is an ethernet protocol that uses the layering and formatting of
Architecture for Control Networks to transport DMX512 data over IP or any other ACN compatible network.
Kling-Net Connection
Kling-Net is a network protocol that allows auto configuration of display devices using an ethernet
connection. Refer to the ArKaos software manual for detailed instructions on programming this product.
Connection Diagram
ArKaos Kling-Net does not support the pan and tilt functions, and must be paired
with another protocol for full functionality with the Maverick Storm 1 Wash.
Switch or Router
(such as the NET-Switch from
CHAUVET Professional)
Computer/
Controller
(running Art-
Net™, sACN,
or Kling-Net
protocol)
To other Art-Net™, sACN, or Kling-Net devices
Maverick
Storm 1 Wash

Page 8 of 58
Maverick Storm 1 Wash User Manual Rev. 1
Operation
4. Operation
Control Panel Description
Menu Map
Button Name Function
<UP> Navigates upwards through the menu list or increases the numeric value when
in a function
<MENU> Exits from the current menu or function
<DOWN> Navigates downwards through the menu list or decreases the numeric value
when in a function
<LEFT> Navigates leftwards through the menu list
<RIGHT> Enables the currently displayed menu or sets the currently selected value into
the selected function
<ENTER> Navigates rightwards through the menu list
Programming Levels Description
Control Settings Main Level
Control Settings
Single
Control
DMX Personality
Basic
Sets the DMX personality
(see Control Personalities)
Standard
Advanced
Tour
Start Address 1–512 Sets the DMX starting address
ArtNet
Personality
Basic
Sets the Art-Net™ personality
(see Control Personalities)
Standard
Advanced
Tour
Start Address 1–512 Sets the Art-Net™ starting address
Universe 0–255 Sets the Art-Net™ universe
sACN
Personality
Basic
Sets the sACN personality
(see Control Personalities)
Standard
Advanced
Tour
Start Address 1–512 Sets the sACN starting address
Universe 1–256 Sets the sACN universe
WDMX Personality
Basic
Sets the WDMX personality
(see Control Personalities)
Standard
Advanced
Tour
Start Address 1–512 Sets the WDMX starting address

Page 9 of 58
Operation
Maverick Storm 1 Wash User Manual Rev. 1
Programming Levels Description
Control Settings Main Level
Control Settings
Dual Control
Movement
DMX
Personality
Basic Sets the DMX personality
(see Control Personalities)
Standard
Advanced
Start Address 1–512 Sets the DMX starting
address
ArtNet
Personality
Basic Sets the Art-Net™
personality
(see Control Personalities)
Standard
Advanced
Start Address 1–512 Sets the Art-Net™ starting
address
Universe 0–255 Sets the Art-Net™
universe
sACN
Personality
Basic Sets the sACN personality
(see Control Personalities)
Standard
Advanced
Start Address 1–512 Sets the sACN starting
address
Universe 1–256 Sets the sACN universe
Pixels
DMX
Personality
Basic Sets the DMX personality
(see Control Personalities)
Standard
Advanced
Start Address 1–512 Sets the DMX starting
address
ArtNet
Personality
Basic Sets the Art-Net™
personality
(see Control Personalities)
Standard
Advanced
Start Address 1–512 Sets the Art-Net™ starting
address
Universe 0–255 Sets the Art-Net™
universe
sACN
Personality
Basic Sets the sACN personality
(see Control Personalities)
Standard
Advanced
Start Address 1–512 Sets the sACN starting
address
Universe 1–256 Sets the sACN universe
KlingNet Personality
Basic Sets the Kling-Net
personality
(see Control Personalities)
Standard
In Dual Control mode, the Movement Protocol and the Pixels Protocol cannot be the
same.

Page 10 of 58
Maverick Storm 1 Wash User Manual Rev. 1
Operation
Programming Levels Description
Test Mode Test Mode Main Level
Test Mode
Auto Test Auto test all functions
Manual Test
Pan
000–255 Manually control and test all settings
through the control panel
Tilt
P/T Speed
Red
Green
Blue
White
CTC
Color
Pattern
LED Macro
LED Ma. Speed
LED Ma. Fade
Background
Background Dim.
Dimmer
Shutter
Function
Zoom
Setup Setup Main Level
Setup
Network Settings
IP Mode
Manual Manually set IP address
DHCP Network sets IP address
Static Product sets IP address
IpAddress _ _ _._ _ _._ _ _._
_ _ Sets IP address in Manual mode
SubMask _ _ _._ _ _._ _ _._
_ _ Sets Subnet Mask in Manual mode
Pan Reverse NO Normal pan
YES Reversed pan
Tilt Reverse NO Normal tilt
YES Reversed tilt
Zoom Reverse NO Normal Zoom
YES Reversed Zoom
Screen Reverse
NO Normal display
YES Inverted display
AUTO Automatic display orientation
Pan Angle
540 540° pan range
360 360° pan range
180 180° pan range
Tilt Angle
270 270° tilt range
180 180° tilt range
90 90° tilt range
BL. O. P/T Move NO Do not black out while pan/tilt
YES Blackout while pan/tilt
Lock Screen NO Lock the control panel
Passcode: 0920
YES
Swap XY NO Do not swap pan and tilt
YES Pan controls tilt, tilt controls pan
WDMX Reset NO Do not reset WDMX
YES Reset WDMX
Backlight Timer
30S Display turns off after 30 seconds
1M Display turns off after 1 minute
5M Display turns off after 5 minutes
ON Display stays on

Page 11 of 58
Operation
Maverick Storm 1 Wash User Manual Rev. 1
Programming Levels Description
Setup (cont.) Setup Main Level (cont.)
Setup (cont.)
Loss of Data Hold Holds last signal received
Close Blacks out fixture
Fans
Auto Fan speed according to product
temperature
Full Fan speed set on high
ECO Quiet mode
C Mixing Mode RGBW RGBW mode (additive mode)
CMY CMY mode (subtractive mode)
Dimmer Curve
Linear
Set the dimmer curve
Square
I Squa
SCurve
Dimmer Speed Smooth Set the dimmer speed
Fast
PWM Option
600Hz
Sets the Pulse Width Modulation
frequency
1200Hz
2000Hz
4000Hz
6000Hz
15000Hz
Color Balance
Red
100–255
Sets red LED maximum value
Green Sets green LED maximum value
Blue Sets blue LED maximum value
White Sets white LED maximum value
Preset Select
PRESET A
Recorded preset menu optionsPRESET B
PRESET C
Preset sync
NO Allows recorded preset menu options to
be transferred to other Maverick Storm 1
Wash products in the DMX daisy chain
YES
Reset Function
Pan/Tilt NO
Reset individual functions or all functions
from start-up
YES
Zoom NO
YES
All NO
YES
Factory Settings NO Reset to factory default settings
YES
Sys Info Sys Info Main Level
Sys Info
Fixture
Information
Ver V_._ _ _ _ Shows firmware version
Running Mode _ _ _ Shows current running mode
Address _ _ _ Shows current starting address
Temperature _ _ _ Shows current product temperature in °C
Fixture Hours _ _ _ _ _ Shows number of hours product has
been powered on
Ip _ _ _._ _ _._ _ _._
_ _ Shows current IP address
SubMask _ _ _._ _ _._ _ _._
_ _ Shows current Subnet Mask
MAC _ _._ _._ _._ _._
_._ _ Shows current MAC address
Fan Information Head Fan1 Speed _ _ _ _ Shows speed of head fans in rpm
Head Fan2 Speed _ _ _ _
Error Information No Error!* Shows any errors, or No Error!

Page 12 of 58
Maverick Storm 1 Wash User Manual Rev. 1
Operation
Protocol Configuration
The Maverick Storm 1 Wash can be set to respond to DMX, WDMX, Art-Net™, sACN, Kling-Net, or a
combination of those protocols. The protocol configuration must be set for the product to respond correctly
to the controller(s).
Control Personalities
The following control personalities are available on the Maverick Storm 1 Wash:
Programming Levels Description
Sys Info (cont.) Sys Info Main Level (cont.)
Sys Info (cont.)
Channel Information
Frequency
_ _ _ Shows all current values from
input signals, 000–255
Pan
Pan Fine
Tilt
Tilt Fine
CTC
Color
Pattern
LED Macro
LED Ma. Speed
LED Ma. Fine
Background
Background Dim.
Bg. Dim. Fine
Dimmer
Dimmer Fine
Shutter
Zoom
Function
Red (all, 1–19)
Red Fine (all, 1–19)
Green (all, 1–19)
Green fine (all, 1–19)
Blue (all, 1–19)
Blue Fine (all, 1–19)
White (all, 1–19)
White Fine (all, 1–19)
Dimmer (1–19)
Dimmer Fine (1–19)
Single Control Dual Control Movement Dual Control Pixels
Basic (20-channel) Basic (8-channel) Basic (57-channel)
Standard (96-channel) Standard (20-channel) Standard (76-channel)
Advanced (178-channel) Advanced (26-channel) Advanced (152-channel)
Tour (216-channel) Uses DMX, Art-Net™, or
sACN
Uses DMX, Art-Net™,
sACN, or Kling-Net
Uses DMX, Art-Net™,
sACN, or WDMX

Page 13 of 58
Operation
Maverick Storm 1 Wash User Manual Rev. 1
Single Control
In Single Control mode, the Maverick Storm 1 Wash is controlled by a single protocol input. Choose from
DMX, Art-Net™, sACN, or WDMX. In this mode, the four personalities available are Basic (20 channels),
Standard (96 channels), Advanced (178 channels), and Tour (216 channels).
Single Control Protocol
To select the Single Control protocol, follow the instructions below:
1. Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Control Settings.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Single Control.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select from DMX, ArtNet, sACN, or WDMX.
7. Press <ENTER>.
Single Control Personality
To select the Single Control personality, set the Protocol, then do the following:
1. Use <UP> or <DOWN> to select Personality.
2. Press <ENTER>.
3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from Basic (20-channel), Standard (96-
channel), Advanced (178-channel), or Tour (216-channel).
4. Press <ENTER>.
Single Control Start Address
To set the starting address of the Single Control mode, set the Protocol, then follow the instructions below:
1. Use <UP> or <DOWN> to select Start Address.
2. Press <ENTER>.
3. Enter the starting address (1–512) using the buttons:
a. Use <LEFT> or <RIGHT> to select the digit to be altered.
b. Use <UP> or <DOWN> to increase or decrease the number value of that digit.
c. Repeat until the address is set as desired.
4. Press <ENTER>.
Single Control Universe
To set the Universe address of the Single Control mode when using Art-Net™ or sACN, set the Protocol to
ArtNet or sACN, then do the following:
1. Use <UP> or <DOWN> to select Universe.
2. Press <ENTER>.
3. Enter the universe address (0–255 for Art-Net™ or 1–256 for sACN) using the buttons:
a. Use <LEFT> or <RIGHT> to select the digit to be altered.
b. Use <UP> or <DOWN> to increase or decrease the number value of that digit.
c. Repeat until the address is set as desired.
4. Press <ENTER>.
For WDMX control, ensure the antenna is raised and there are no obstructions
between the controller and the product. See WDMX Reset for troubleshooting
information.

Page 14 of 58
Maverick Storm 1 Wash User Manual Rev. 1
Operation
Dual Control
In Dual Control mode, the Maverick Storm 1 Wash is controlled by two protocol inputs. One controls the
movement of the yoke and zoom, as well as the dimmers and shutter, while the other controls the
individual LED output.
Dual Control Movement
The Movement protocol controls the movement of the yoke and zoom, as well as the dimmers and shutter.
Choose from DMX, Art-Net™, or sACN. In this mode, the three personalities available are Basic (8
channels), Standard (20 channels), and Advanced (26 channels).
Dual Control Movement Protocol
To select the Dual Control Movement protocol, follow the instructions below:
1. Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Control Settings.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Dual Control.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select Movement.
7. Press <ENTER>.
8. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from DMX, ArtNet, or sACN.
9. Press <ENTER>.
Dual Control Movement Personality
To select the Dual Control Movement personality, set the Protocol, then do the following:
1. Use <UP> or <DOWN> to select Personality, or touch the display where it says Personality.
2. Press <ENTER>.
3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from Basic (8-channel), Standard (20-
channel), or Advanced (26-channel).
4. Press <ENTER>.
Dual Control Movement Start Address
To set the starting address of the Dual Control Movement mode, set the Protocol, then follow the
instructions below:
1. Use <UP> or <DOWN> to select Start Address.
2. Press <ENTER>.
3. Enter the starting address (1–512) using the buttons:
a. Use <LEFT> or <RIGHT> to select the digit to be altered.
b. Use <UP> or <DOWN> to increase or decrease the number value of that digit.
c. Repeat until the address is set as desired.
4. Press <ENTER>.
Dual Control Movement Universe
To set the Universe address of the Dual Control Movement mode when using Art-Net™ or sACN, set the
Protocol to ArtNet or sACN, then do the following:
1. Use <UP> or <DOWN> to select Universe.
2. Press <ENTER>.
3. Enter the universe address (0–255 for Art-Net™ or 1–256 for sACN) using the buttons:
a. Use <LEFT> or <RIGHT> to select the digit to be altered.
b. Use <UP> or <DOWN> to increase or decrease the number value of that digit.
c. Repeat until the address is set as desired.
4. Press <ENTER>.

Page 15 of 58
Operation
Maverick Storm 1 Wash User Manual Rev. 1
Dual Control Pixels
The Pixels protocol controls the individual output of the LEDs. Choose from DMX, Art-Net™, sACN, or
Kling-Net. In this mode, the three personalities available are Basic (57 channels), Standard (76 channels),
and Advanced (152 channels).
Dual Control Pixels Protocol
To select the Dual Control Pixels protocol, follow the instructions below:
1. Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Control Settings.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Dual Control.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select Pixels.
7. Press <ENTER>.
8. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from DMX, ArtNet, sACN, or KlingNet.
9. Press <ENTER>.
Dual Control Pixels Personality
To select the Dual Control Pixels personality, set the Protocol, then do the following:
1. Use <UP> or <DOWN> to select Personality.
2. Press <ENTER>.
3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from Basic (57-channel), Standard (76-
channel), or Advanced (152-channel).
4. Press <ENTER>.
Dual Control Pixels Start Address
To set the starting address of the Dual Control Pixels mode, set the Protocol, then follow the instructions
below:
1. Use <UP> or <DOWN> to select Start Address.
2. Press <ENTER>.
3. Enter the starting address (1–512) using the buttons:
a. Use <LEFT> or <RIGHT> to select the digit to be altered.
b. Use <UP> or <DOWN> to increase or decrease the number value of that digit.
c. Repeat until the address is set as desired.
4. Press <ENTER>.
Dual Control Pixels Universe
To set the Universe address of the Dual Control Pixels mode when using Art-Net™ or sACN, set the
Protocol to ArtNet or sACN, then do the following:
1. Use <UP> or <DOWN> to select Universe.
2. Press <ENTER>.
3. Enter the universe address (0–255 for Art-Net™ or 1–256 for sACN) using the buttons:
a. Use <LEFT> or <RIGHT> to select the digit to be altered.
b. Use <UP> or <DOWN> to increase or decrease the number value of that digit.
c. Repeat until the address is set as desired.
4. Press <ENTER>.
ArKaos Kling-Net can only be assigned the Basic and Standard Pixels personalities.