Chauvet Professional OVATION E-910FC User manual

User Manual
Model ID: OVATIONE910FC
*LENS TUBE SOLD SEPARATELY

Ovation E-910FC User Manual Rev. 15
Edition Notes
The Ovation E-910FC User Manual includes a description, safety precautions, installation, programming,
operation and maintenance instructions for the Ovation E-910FC.
Trademarks
Chauvet, Chauvet Professional, the Chauvet logo, and Ovation are registered trademarks or trademarks of
Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries.
Other company and product names and logos referred to herein may be trademarks of their respective
companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited to, all designs, text, and images
are owned by Chauvet.
© Copyright 2023 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information purposes
only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this
manual or its content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4
paper (210 x 297 mm), configure the printer to scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should completely read through the guide
that shipped with the product, as well as this manual, before installing, operating, or maintaining this
product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions.
Document Revision
Go to www.chauvetprofessional.com for the latest version.
Revision Date Description
15 11/2023 Added note to Focus Filter/Mounting section.

Ovation E-910FC User Manual Rev. 15
Table of Contents
i
TABLE OF CONTENTS
1. Before You Begin ....................................................................... 1
What Is Included ........................................................................................... 1
Claims ........................................................................................................... 1
Manual Conventions ..................................................................................... 1
Symbols ........................................................................................................ 1
Safety Notes.................................................................................................. 2
FCC Statement of Compliance ..................................................................... 3
Expected LED Lifespan................................................................................. 3
2. Introduction ................................................................................ 4
Description .................................................................................................... 4
Features........................................................................................................ 4
Product Overview.......................................................................................... 5
Product Dimensions ...................................................................................... 6
3. Setup ........................................................................................... 7
AC Power...................................................................................................... 7
AC Plug .......................................................................................................................... 7
Power Linking................................................................................................................. 7
Fuse Replacement ......................................................................................................... 7
DMX Linking.................................................................................................. 7
DMX Personalities.......................................................................................................... 7
Remote Device Management......................................................................................... 8
Master/Slave Connectivity............................................................................. 8
Mounting ....................................................................................................... 8
Orientation...................................................................................................................... 8
Rigging ........................................................................................................................... 8
Procedure....................................................................................................................... 8
Manual Beam Focus Control......................................................................... 10
Rotating the Barrel Assembly........................................................................ 10
Accessory Slot .............................................................................................. 10
Soft Focus Filter............................................................................................ 11
4. Operation .................................................................................... 12
Control Panel Operation................................................................................ 12
Control Options ............................................................................................. 12
Programming................................................................................................. 12
DMX Configuration........................................................................................ 12
DMX Personalities.......................................................................................................... 12
Starting Address............................................................................................................. 12
Menu Map ..................................................................................................... 13
Standalone Configuration.............................................................................. 16
Focus Mode ................................................................................................................... 16
Virtual Color Wheel ........................................................................................................ 16
Color Temperature ......................................................................................................... 16
Manual Color Mixer ........................................................................................................ 16
Auto Programs ............................................................................................................... 16
Red Shift ........................................................................................................................ 16
Master/Slave .................................................................................................................. 17
Dimmer Curve ................................................................................................................ 18
Dimmer Profiles.............................................................................................................. 18
White Balance ................................................................................................................ 18
LED Frequency .............................................................................................................. 18
Fan Mode ....................................................................................................................... 18

Table of Contents
Ovation E-910FC User Manual Rev. 15
ii
Back Light ...................................................................................................................... 18
System Information ........................................................................................................ 18
Virtual Color Wheel ....................................................................................... 19
Virtual Color Wheel Chart .............................................................................................. 19
Color Temperature DMX Chart ...................................................................................... 20
DMX Values .................................................................................................. 21
5. Technical Information ................................................................ 23
Product Maintenance .................................................................................... 23
6. Technical Specifications ........................................................... 24
Contact Us ...................................................................................... 25
Warranty & Returns....................................................................................... 25

1
Ovation E-910FC User Manual Rev. 15
Before You Begin
1. Before You Begin
What Is Included
Claims
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate customer’s claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Manual Conventions
Symbols
• Ovation E-910FC
•Neutri®kpowerCON®power cable
• Soft focus filter
• Quick Reference Guide
Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
<SET> A button on the product’s control panel
Settings A product function or a menu option
Symbol Meaning
Electrical warning. Not following these instructions may cause electrical damage to
the product, accessories, or the user.
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function
correctly if this information is not used.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital
data transmission protocol.
!

2
Before You Begin
Ovation E-910FC User Manual Rev. 15
Safety Notes
Read all the following safety notes before working with this product. These notes contain important
information about the installation, usage, and maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in this
User Manual will only apply to properly trained, certified technicians. Do not open the
housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.
• The luminaire is intended for professional use only.
• The luminaire should be positioned so that prolonged staring into the luminaire at a distance
closer than (2.3 m) is not expected.
• If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special
cord or cord exclusively available from the manufacturer or its service agent.
• The light source contained in this luminaire shall only be replaced by the manufacturer or its
service agent or a similar qualified person.
• CAUTION:
• This product’s housing may be hot when operating. Mount this product in a location with
adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
• When transferring the product from extreme temperature environments, (e.g., cold truck to
warm humid ballroom) condensation may form on the internal electronics of the product. To
avoid causing a failure, allow the product to fully acclimate to the surrounding environment
before connecting it to power.
• Flashing light is known to trigger epileptic seizures. User must comply with local laws
regarding notification of strobe use.
• ALWAYS:
• Disconnect from power before cleaning the product or replacing the fuse.
• Replace the fuse with the same type and rating.
• Use a safety cable when mounting this product overhead.
• Connect this product to a grounded and protected circuit.
•DONOT:
• Open this product. It contains no user-serviceable parts.
• Look at the light source when the product is on.
• Leave any flammable material within 50 cm of this product while operating or connected to
power.
• Connect this product to a dimmer or rheostat.
• Operate this product if the housing, lenses, or cables appear damaged.
• Operate this product outdoors or in any location where dust, excessive heat, water, or
humidity may affect it (adhere to standards for the published IP rating).
• Use for space-heating purposes.
• ONLY use the hanging/mounting bracket to carry this product.
• The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher
temperatures.
• The minimum startup temperature is -4°F (-20°C). Do not start the product at lower
temperatures.
• The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower
temperatures.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
• In the event of a serious operating problem, stop using immediately.
If a Chauvet product requires service, contact Chauvet Technical Support.
!

3
Ovation E-910FC User Manual Rev. 15
Before You Begin
FCC Statement of Compliance
This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
Expected LED Lifespan
Over time, use and heat will gradually reduce LED brightness. Clustered LEDs produce more heat than
single LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is
40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit
the overall intensity.

4
Introduction
Ovation E-910FC User Manual Rev. 15
2. Introduction
Description
The Ovation E-910FC is a high-performance ERS-style fixture with full RGBAL color mixing and color
temperature presets of 2800 K to 6500 K that match the output of a tungsten source to perfection. Control
options include full 16-bit dimming (per color and master), selectable PWM, RDM, and on-board dimming
curve selection. Chauvet’s Virtual Color Wheel, which matches popular gel colors, is also accessible.
Features
• Operating modes:
• HSV: hue, saturation, value control
• 1-channel: dimmer
• 3-channel: dimmer, virtual color wheel, color temperature
• 5-channel: RGBAL control
• 7-channel: RGBAL control, dimmer, strobe
• 10-channel: RGBAL control, 16-bit dimmer, strobe, virtual color wheel, color temperature
• 12-channel: RGBAL control, dimmer, strobe, virtual control wheel, color temperature, auto
programs, auto speed, control
• 13-channel: 16-bit RGBAL and dimmer, strobe
• 16-channel: 16-bit RGBAL and dimmer, strobe, virtual color wheel, color temperature, control
• Full-color LED (RGBAL) ERS-style lighting product for theater, film, and production
• Ultra-smooth 16-bit dimming of master dimmer and individual colors
• Flat, even field of light with superior color mixing
• Virtual color wheel with color matched to popular gel colors
• Color temperature presets from 2800 K to 6500 K with high CRI and CQS
• RDM (Remote Device Management) for added flexibility
• Adjustable PWM (Pulse Width Modulation) to avoid flickering on camera
• Virtually silent operation for use in studio and theater applications
• Works perfectly with industry-standard lens tubes and accessories

5
Ovation E-910FC User Manual Rev. 15
Introduction
Product Overview
Pattern holder
(A-size holder for 3-inch patterns,
B-size holder for 2.5-inch and 2.75-inch patters,
sold separately)
Barrel rotation knob
Beam focus knob
Lens tube
(sold separately) Light engine
Gel frame holder
Barrel assembly
Framing shutter (x4)
Control panel
Fuse
Power in
Power out
Handle
Menu buttons
3- and 5-pin
DMX out
3- and 5-pin
DMX in

6
Introduction
Ovation E-910FC User Manual Rev. 15
Product Dimensions
6.86 in
174 mm
11.17 in
283 mm
25.910 in
283 mm
19.35 in
491 mm
19.15 in
486 mm
6.77 in
172 mm

7
Ovation E-910FC User Manual Rev. 15
Setup
3. Setup
AC Power
Each Ovation E-910FC has an auto-ranging power supply that works with an input voltage range of 100 to
240 VAC, 50/60 Hz. To determine the power requirements for each Ovation E-910FC, refer to the label
affixed to the product or to the Technical Specifications chart in this manual.
The listed current rating indicates the maximum current draw during normal operation. For more
information, download Sizing Circuit Breakers from the Chauvet website: www.chauvetprofessional.com.
AC Plug
The Ovation E-910FC comes with a power input cord terminated with a Neutrik® powerCON® connector
on one end and an Edison plug on the other end (U.S. market). If the power input cord that came with the
product has no plug, or if the plug needs to be changed, use the table below to wire the new plug.
Power Linking
It is possible to power link Ovation E-910FC products. See the table below for the current draw at each
voltage and frequency:
Never exceed 12A on a single circuit. Power-linking cables can be purchased separately.
Fuse Replacement
1. Disconnect this product from the power outlet.
2. Using a Phillips-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with another fuse of the same type and rating (T 3.15 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.
DMX Linking
The Ovation E-910FC can be linked to a DMX controller using a 3- and 5-pin DMX connection. If using
other DMX-compatible products with this product, it is possible to control each individually with a single
DMX controller.
DMX Personalities
The Ovation E-910FC uses a 3- and 5-pin DMX data connection for the HSV, 1Ch, 3Ch, 5Ch, 7Ch, 10Ch,
12Ch, 13Ch, and 16Ch DMX personalities.
• Refer to the Introduction for a brief description of each DMX personality.
• Refer to the Operation chapter to learn how to configure the Ovation E-910FC to work in these
personalities.
•TheDMX Values section provides detailed information regarding the DMX personalities.
• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure
the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
100 V, 60 Hz 120 V, 60 Hz 208 V, 60 Hz 230 V, 50 Hz 240 V, 50 Hz
Current Draw 2.171 A 1.786 A 1.032 A .935 A .904 A
Make sure to disconnect the product’s power cord before replacing a blown fuse.
Always replace the blown fuse with another of the same type and rating.
For information about DMX standards, Master/Slave connectivity, or the DMX cables
needed to link this product to a DMX controller, download the DMX Primer from the
Chauvet website: www.chauvetprofessional.com.
!
!

8
SETUP
Ovation E-910FC User Manual Rev. 15
Remote Device Management
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate
bi-directionally along existing DMX cabling. Check with the manufacturer or the DMX controller’s User
Manual, as not all DMX controllers have this capability. The Ovation E-910FC supports RDM protocol that
allows feedback to make changes to menu map options.
Master/Slave Connectivity
The Master/Slave mode allows an Ovation E-910FC (the master) to control one or more Ovation E-910FC
products (the slaves) without a DMX controller. One Ovation E-910FC becomes the master when running
an auto or custom program, or in Static mode.
Each slave’s control panel must be configured to operate in Slave mode. During Master/Slave operation,
the slaves will operate in unison with the master.
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
For Chauvet Professional line of mounting clamps, go to: http://trusst.com/products/.
Orientation
Always mount this product in a safe position, ensuring that there is adequate room for ventilation,
configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product:
• Before deciding on a location for the product, makesure there is easy access to the product for
maintenance and programming.
•Make sure that the structure and attachment points can support the weight before hanging the
product (see the Technical Specifications).
•When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform ora truss.
•When rigging the product onto atruss, use a mounting clamp of appropriate weight capacity.
• When power linking multiple products, mount the products close enough for power-linking cables to reach.
• The bracket adjustment knobs allow for directional adjustment when aiming the product to the desired
angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the knobs.
Procedure
The Ovation E-910FC comes with a double-bracketed yoke that can be used as a floor stand or to which
mounting clamps can be attached for hanging. Mounting clamps must be purchased separately. Ensure that the
clamps can support the weight of this product. Use at least one mounting point per product where necessary.
DO NOT connect a DMX controller to products operating in Master/Slave mode. The
DMX controller signals may interfere with the signals from the master.
•TheOperation section of this manual provides detailed instructions on how to
configure the master and slaves.
• For more information about DMX standards or the DMX cables needed to link this
product to a DMX controller, download the DMX primer from the Chauvet website:
www.chauvetprofessional.com.

9
Ovation E-910FC User Manual Rev. 15
Setup
Mounting Diagram
Mounting bracket
Mounting clamp
Bracket adjustment hand shank
Safety cable
Alternate Short Mounting

10
SETUP
Ovation E-910FC User Manual Rev. 15
Manual Beam Focus Control
The Ovation E-910FC has a manual focus, which is adjusted as follows:
1. Locate the beam focus knobs at the top and bottom of the barrel assembly.
2. Loosen the knobs by turning them counterclockwise.
3. Slide the lens tube forward or backward until the desired focus or beam edge is achieved.
4. Tighten the knobs by turning them clockwise, which locks the lens tube’s position.
Rotating the Barrel Assembly
The Ovation E-910FC allows manual rotation of the barrel assembly, as follows:
1. Locate the barrel rotation knobs at the top and bottom of the light engine.
2. Loosen the knobs by turning them counterclockwise. (Note: Do not remove the knobs.)
3. Rotate the barrel to the desired position, up to 25° in either direction from the centered position.
4. Tighten the knobs by turning them clockwise, which locks the barrel’s position.
Accessory Slot
The Ovation E-910FC has an accessory slot, which holds a drop-in iris, a motorized pattern device, or
various other optional accessories (sold separately).
1. Loosen the thumbscrews on the slot cover. (Note: Do not remove the thumbscrews).
2. Slide to cover forward.
3. Insert an accessory. (Note: Make sure to insert the accessory correctly. i.e., the iris handle
extends upward from the slot.
4. Slide the cover back. Make sure any handles or adjustment tools that stick out the top are able to
function correctly.
5. Tighten the thumbscrews to secure the cover.
To avoid changing menu settings while focusing the Ovation E-910FC, press and
hold the <ENTER> button for 3 seconds. This will put the product in Focus Mode, by
increasing the intensity to 100%. To exit out of focus mode, press <MENU>.
Ensure that the barrel assembly is oriented with the pattern holder and accessory
slots at the top of the product.
• When not using the accessory slot, replace and secure the slot cover to prevent
light leakage during operation.
• When obtaining any optional accessories, be sure the items are compatible with
the Ovation E-910FC.
Iris handle
Thumb screws
Accessory Slot Cover Sample Drop-in Iris

11
Ovation E-910FC User Manual Rev. 15
Setup
Soft Focus Filter
The Ovation E-910FC comes with a soft focus filter. To keep the soft focus filter in good condition:
• Ensure that no fingerprints are left on the filter, as this may cause the filter to heat unevenly and
eventually warp.
• When placing the filter in the holder, follow the orientation direction printed on the filter.
• When inserting shutter blades into the light path, note that the heat is reflected back at the filter. The
deeper the blades are inserted, and the longer the fixture runs, the more heat gets reflected on to
the filter, causing it to warp and potentially adhere to the shutter blades.
The lifespan and effectiveness of the Soft Focus Filter accessory included with this
product will be negatively impacted by excessive reflected heat caused by the
extended use of gobos, shutters, irises, and other beam shaping accessories. The
filter is not covered by the limited warranty. Replacements are available for
purchase.

12
Operation
Ovation E-910FC User Manual Rev. 15
4. Operation
Control Panel Operation
Control Options
Set the Ovation E-910FC starting address in the 001-512 DMX range. This enables control of up to 12
products in the 16-channel personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main level and a
variable number of programming levels for each option.
• To go to the desired main level, press <MENU> repeatedly until the option shows on the display.
Press <ENTER> to select. This will show the first programming level for that option.
• To select an option or value within the current programming level, press <UP> or <DOWN> until
the option shows on the display. Press <ENTER> to select. This will show either the first option if
there is another programming level, or the selected value.
• Press <MENU> repeatedly to exit to the previous main level.
DMX Configuration
Use DMX configurations to operate the product with a DMX controller.
DMX Personalities
This setting allows the user to choose a particular DMX personality.
1. Go to the DMX Channel main level.
2. Select the desired personality (1Ch, 3Ch, 5Ch, 7Ch, 10Ch, 12Ch, 13Ch, 16Ch, and HSV).
Starting Address
In this mode, each product will respond to a unique starting address from the DMX controller. All products
with the same starting address will respond in unison.
1. Go to the DMX Address main level.
2. Set the starting address (001–512).
The highest recommended starting address for each DMX mode is as follows:
Button Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently selected value in to the current
function
<UP> Navigates upward through the menu list or increases the numeric value when in a function
<DOWN> Navigates downward through the menu list or decreases the numeric value when in a function
• See the Starting Address section for the highest starting address suggested for each
personality.
• Make sure that the starting addresses on the various products do not overlap due to
the new personality setting.
DMX Personality DMX Address DMX Personality DMX Address
HSV 510 10Ch 503
1Ch 512 12Ch 501
3Ch 510 13Ch 500
5Ch 508 16Ch 497
7Ch 506

13
Ovation E-910FC User Manual Rev. 15
Operation
Menu Map
Refer for the Ovation E-910FC product page on www.chauvetprofessional.com for the latest menu map.
Main Level Programming Levels Description
DMX
Address 001–512* Selects DMX address (*highest channel restricted to personality chosen)
DMX
Channel
1Ch 1-channel: dimmer
3Ch 3-channel: dimmer, virtual color wheel,
color temperature
5Ch 5-channel: RGBAL
7Ch 7-channel: dimmer, RGBAL, strobe
10Ch
10-channel: 16-bit dimmer, RGBAL,
strobe, virtual color wheel, color
temperature
12Ch
12-channel: dimmer, RGBAL, strobe,
virtual color wheel, color temperature, auto
program, auto speed, control
13Ch
13-channel: 16-bit dimmer, 16-bit
RGBAL, strobe
16Ch
16-channel: 16-bit dimmer, 16-bit
RGBAL control, strobe, virtual color
wheel, color temperature, control
HSV 3-channel: hue, saturation, value

14
Operation
Ovation E-910FC User Manual Rev. 15
Virtual
Color
Wheel
Virtual Color
Wheel
C3050 - Md Yellow
Dimmer
0–255
Virtual Color Wheel simulates the output
of each gel color. Refer to the Virtual
Color Wheel Chart for specific values.
C3040 - Lt Yellow
C3240 - Amb Yellow
C2340 - VLt Amber
C2040 - Lt Amber
C2050 - Md Amber
C2060 - Dk Amber
C1050 - Lt Red
C1080 - Md Red
C1020 - NC Pink
C1030 - Md Pink
C1630 - Dk Pink
C1250 - Md Red Amber
C1060 - Dk Red Amber
C1650 - Magenta
C6170 - Dk Magenta
C6020 - Lt Lavender
C5030 - Lt Blue
C5020 - VLt Blue
C5430 - Lt Blue 2
C5070 - Blue
C5050 - Md Blue
C5060 - Dk Blue
C5690 - Indigo
C5080 - VDk Blue
C5081 - VDk Blue 2
C4370 - Yel Green
C4070 - Green
C4550 - Turquoise
C4560 - Aqua
C4570 - Blue Green
Main Level Programming Levels Description

15
Ovation E-910FC User Manual Rev. 15
Operation
Virtual
Color
Wheel
Color
Temperature
2800K
Dimmer
0–255
Preset white color temperatures.
Emulates a tungsten lamp at the
specified color temperature. Refer to the
Color Temperature DMX Chart for
specific values.
3000K
3200K
3500K
4000K
4500K
5000K
5600K
6000K
6500K
Manual
Color Mixer
Red
0–255 Combines red, green, blue, amber, and
lime to make a custom color (0–100%)
Green
Blue
Amber
Lime
Color X-Fade
Speed
Off Turns off the fade transition between
colors
X-Fade Speed 1 Creates fade transition between colors
when using colors in the Virtual Color
Wheel or Color Temperature chart, from
fast (X-Fade Speed 1) to slow (X-Fade
Speed 4)
X-Fade Speed 2
X-Fade Speed 3
X-Fade Speed 4
Auto Show Auto 1–5 1–100 Selects automatic programs and auto
program speed
Red Shift On Mimics halogen lamp dimming
Off
Master/
Slave
Master
Receives DMX signal from the DMX
controller (master)
Slave Receives DMX signal from the master unit
Dimmer
Curve
SCurve
Sets the dimmer curve
Linear
Square
Inverse Square
Dimmer
Mode
Off Linear dimmer
Dimmer 1–3 Dimming curves, from fast (Dimmer 1)
to slow (Dimmer 3)
White
Balance
Off Uses factory default white setting
Manual
Red
125–255
Sets red LED maximum value
Green Sets green LED maximum value
Blue Sets blue LED maximum value
Amber Sets amber LED maximum value
Lime Sets lime LED maximum value
LED
Frequency
600Hz
Sets the PWM frequency
1200Hz
2000Hz
4000Hz
6000Hz
25KHz
Main Level Programming Levels Description

16
Operation
Ovation E-910FC User Manual Rev. 15
Standalone Configuration
Use standalone configuration to operate the product without a DMX controller.
Focus Mode
Focus mode allows for focusing of the Ovation E-910FC without changing any menu settings.
1. Press and hold <ENTER> for 3 seconds. The intensity will increase to 100%.
2. Press <MENU> to exit to previous settings.
Virtual Color Wheel
1. Go to the Virtual Color Wheel main level.
2. Select Virtual Color Wheel.
3. Select the desired gel color (see Virtual Color Wheel Chart).
4. Select the desired output level (000–255).
Color Temperature
To select a color temperature, do the following:
1. Go to the Virtual Color Wheel main level.
2. Select Color Temperature.
3. Select the desired color temperature (see Color Temperature DMX Chart).
4. Select the desired output level (000–255).
Manual Color Mixer
To do color mixing without a DMX controller, follow the instructions below:
1. Go to the Virtual Color Wheel main level.
2. Select Manual Color Mixer.
3. Select the color to edit (Red, Green, Blue, Amber, or Lime Green).
4. Select the desired output level for that color (000–255).
5. Repeat steps 3 and 4 until product outputs as desired.
Auto Programs
Auto programs allow for dynamic RGBAL color mixing without a DMX controller.
1. Go to Auto Show main level.
2. Select the desired auto program (Auto 1–5).
3. Select the desired speed (1–100).
Red Shift
The Red Shift function causes the amber LEDs to imitate the appearance of a halogen lamp when dimming.
To adjust the Red Shift function, do the following:
1. Go to the Red Shift main level.
2. Select On or Off.
Fan Mode
Auto Sets the fan to auto mode
On Sets the fan to always on
Off Sets the fan to always off
Silent Sets the fan to silent
Back Light
10S
Turns off display backlight after 10
seconds
30S
Turns off display backlight after 30
seconds
2Min Turns off display backlight after 2 minutes
Always On Display backlight remains on
Information
Fixture Hours _ _ _ _H
Shows total hours the product has been
powered on
LED Hours _ _ _ _H
Shows total hours the LEDs have been
powered on
Version V_._ Shows current firmware version
UID _ _ _ _ _ _ _ _ _ _ _ _ Shows product UID
Main Level Programming Levels Description