Chauvet Professional nexus Aq 5x5 User manual

User Manual

Nexus™ Aq 5x5 User Manual Rev. 2
Edition Notes
Trademarks
Copyright Notice
Manual Use
Document Printing
Intended Audience
Disclaimer
This User Manual covers the description, safety precautions, installation, programming,
operation, and maintenance of the Nexus™ Aq 5x5.
Chauvet released this edition of the Nexus™ Aq 5x5 User Manual in November 2014.
CHAUVET® is a registered trademark of CHAUVET & Sons, LLC. (d/b/a CHAUVET®
or Chauvet). The CHAUVET® logo in its entirety including the Chauvet name and the
dotted triangle, and all other trademarks in this manual pertaining to services, products, or
marketing statements (for example: It’s Green Thinking™) are owned or licensed by Chauvet.
Art-Net™ is designed and copyrighted by Artistic Licence Holdings Ltd.
Any other product names, logos, brands, company names, and other trademarks featured or
referred to within this document are the property of their respective trademark holders.
Chauvet owns the content of this User Manual in its entirety, including but not limited to
pictures, logos, trademarks, and resources.
©Copyright 2015 Chauvet.All rights reserved.
Electronically published byChauvet in the United States of America
Chauvet authorizes its customers to download and print this manual for professional
information purposes only. Chauvet expressly prohibits the usage, copy, storage, distribution,
modification, or printing of this manual or its content for any other purpose without written
consent from Chauvet.
For better results, print this document in color, on letter size paper (8.5 x 11 in), double-sided.
If using A4 paper (210 x 297 mm), configure your printer to scale the content accordingly.
Any person in charge of installing, operating, and/or maintaining this product should
completely read through the guide that shipped with the product, as well as this manual,
before installing, operating, or maintaining this product.
Chauvet believes that the information contained in this manual is accurate in all respects.
However, Chauvet assumes no responsibility for any errors or omissions in this document.
Chauvet reserves the right to revise and make changes to the content of this document
without obligation that Chauvet notify any person or company of such revision or changes. In
any way, this does not constitute a commitment by Chauvet to make such changes. Chauvet
may issue a revision of this manual or a new edition to incorporate such changes.
Author
Date
Editor
Date
A.Leon
4/14/15
D. Couppe
5/19/15

Nexus™ Aq 5x5 User Manual Rev. 2
Table of Contents
1.Before You Begin...............................................................................................................................3
What Is Included..................................................................................................................................3
Claims..................................................................................................................................................3
Manual Conventions............................................................................................................................3
Symbols...............................................................................................................................................3
Safety Notes........................................................................................................................................4
Expected LED Lifespan.......................................................................................................................4
2.Introduction........................................................................................................................................5
Description...........................................................................................................................................5
Features...............................................................................................................................................5
Overview..............................................................................................................................................6
Dimensions..........................................................................................................................................7
Pixel Layout.........................................................................................................................................7
3.Setup...................................................................................................................................................8
AC Power.............................................................................................................................................8
AC Plug ............................................................................................................................................8
Fuse Replacement...........................................................................................................................8
Power Linking......................................................................................................................................9
Power Linking Diagram....................................................................................................................9
DMX Linking ......................................................................................................................................10
DMX Linking Diagram ....................................................................................................................10
DMX Mode .....................................................................................................................................11
Master/Slave Mode ........................................................................................................................11
Ethernet Connections........................................................................................................................12
Ethernet Connections Diagram......................................................................................................12
Kling-Net Mode...............................................................................................................................12
Art-Net™ Mode ..............................................................................................................................12
Setting Modes And Protocols............................................................................................................13
Mounting............................................................................................................................................14
Orientation......................................................................................................................................14
Rigging ...........................................................................................................................................14
Mounting Diagram With Affinity™ Rig Kit ...................................................................................14
Mounting Diagram With Mounting Clamp...................................................................................15
Horizontal Panel Connection ......................................................................................................15
4.Operation..........................................................................................................................................16
Control Panel.....................................................................................................................................16
Menu Map..........................................................................................................................................17
Menu Operations...............................................................................................................................19
Auto Show......................................................................................................................................19
Exiting Auto Show Mode.............................................................................................................19
Static ..............................................................................................................................................19
Dimmer Mode.................................................................................................................................20
Back Light.......................................................................................................................................20
Product Information........................................................................................................................20
Auto Test.....................................................................................................................................20
DMX Channel.................................................................................................................................21
DMX Address.................................................................................................................................21
Master/Slave Mode ........................................................................................................................21
White Balance................................................................................................................................22
Temperature...................................................................................................................................22
Fan Setup.......................................................................................................................................22

Nexus™ Aq 5x5 User Manual Rev. 2
Reset To Factory Defaults .............................................................................................................22
Setting Ethernet Settings ...............................................................................................................23
Kling-Net .....................................................................................................................................23
Art-Net™ .....................................................................................................................................23
Kling-Net Mapper...............................................................................................................................24
Part 1: Confirm Network Connectivity............................................................................................24
The Connected Devices Window...................................................................................................24
Part 2: Test Network Connectivity..................................................................................................25
Part 3: Map The Products For ArKaos...........................................................................................26
Nexus Software Upgrade Instructions...............................................................................................27
DMX Personalities.............................................................................................................................31
Virtual Gobo Wheel........................................................................................................................32
VGW Channel Summary.............................................................................................................32
Auto Color ......................................................................................................................................32
DMX Channel Assignments And Values...........................................................................................33
111-Channel...................................................................................................................................33
105-Channel...................................................................................................................................37
100-Channel...................................................................................................................................40
75-Channel.....................................................................................................................................42
15-Channel.....................................................................................................................................45
10-Channel.....................................................................................................................................47
6-Channel.......................................................................................................................................48
4-Channel.......................................................................................................................................48
3-Channel.......................................................................................................................................48
HSV................................................................................................................................................48
HSI .................................................................................................................................................48
5.Technical Information .....................................................................................................................49
Product Maintenance.........................................................................................................................49
Returns ..............................................................................................................................................49
6.Technical Specifications.................................................................................................................50
Contact Us...........................................................................................................................................51

Before You Begin
Nexus™ Aq 5x5 User Manual Rev. 2 -3-
1.Before You Begin
What Is
Included
Claims
Manual
Conventions
Symbols
•Nexus™ Aq 5x5
•Neutrik® powerCON® power cord
•#8 Allen key with handle
•Warranty Card
•Quick Reference Guide
Carefully unpack the product immediately, and check the box to make sure all the parts are in
the package and are in good condition.
If the box or the product and included accessories appear damaged from shipping or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to
the carrier immediately may invalidate the claim. In addition, keep the box and contents for
inspection.
For other issues, such as missing components or parts, damage not related to shipping, or
concealed damage, file a claim with Chauvet within 7 days of delivery.
Convention
Meaning
1–512
A range of values in the text
50/60
A set of mutually exclusive values in the text
<SET>
A button on the product’s control panel
Settings
A product function or a menu option
MENU/ESC>Settings
A sequence of menu options
1–10
A range of menu values from which to choose in a menu
Yes/No
A set of two mutually exclusive menu options in a menu
ON
A unique value to be entered or selected in a menu
Symbols
Meaning
Critical installation, configuration, or operation information. Failure to comply
with this information may cause the product not to work, damage third-party
equipment, or cause harm to the operator.
Important installation or configuration information. Failure to comply with this
information may keep the product from working.
Useful information.

Before You Begin
-4- Nexus™ Aq 5x5 User Manual Rev. 2
Safety Notes
Read all the following Safety Notes before working with this product. These notes include
important information about the installation, usage, and maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in this U
ser
Manual will only apply to properly trained Chauvet
certified technicians. Do not open the
housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.
Personal Safety
•Avoid direct eye exposure to the light source while the product is on.
•Always disconnect this product from its power source before servicing.
•Always connect this product to a grounded circuit to avoid the risk of electrocution.
•Do not touch this product’s housing during operation because it may be very hot.
Mounting and
Rigging
•CAUTION: When transferring product from extreme temperature environments, (e.g. cold
truck to warm humid ballroom) condensation may form on the internal electronics of the
product. To avoid causing a failure, allow product to fully acclimate to the surrounding
environment before connecting it to power.This product is for indoor use only! To prevent
risk of fire or shock, do not expose this product to rain or moisture.
•Make sure there are no flammable materials close to this product while it is operating.
•When hanging this product, always secure to a fastening device using a safety cable.
Power and Wiring
•Always make sure you are connecting this product to the proper voltage in accordance with
the specifications in this manual or on the product’s specification label.
•Never connect this product to a dimmer pack or rheostat.
•Never disconnect this product by pulling or tugging on the power cable.
•To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Operation
•Do not operate this product if you see damage on the housing, lenses, or cables. Have the
damaged parts replaced by an authorized technician at once.
•Do not cover the ventilation slots when operating to avoid internal overheating.
•The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at a
higher temperature.
•In case of a serious operating problem, stop using this product immediately!
Expected LED
Lifespan
In the unlikely event that your Chauvet product requires service, contact Chauvet
Technical Support.
LEDs gradually decline in brightness over time, mostly because of heat, LEDs packaged in
clusters exhibit higher operating temperatures than single LEDs. Using clustered LEDs at their
fullest intensity significantly reduces the LEDs’ lifespan, which is 40,000 to 50,000 hours under
normal circumstances, If extending this lifespan is vital, lower the operating temperature by
improving the ventilation around the product and reducing the ambient temperature to the
optimal operating range. In addition, limiting the overall projection intensity may also help to
extend the LEDs’ lifespan.

Introduction
Nexus™ Aq 5x5 User Manual Rev. 2 -5-
2.Introduction
Description
Features
Nexus™ Aq 5x5 is a tour-ready RGBW blinder with a pixel mappable display of twenty-five
10 watt, quad-color LEDs. Each LED projects a narrow beam of light that creates sharp,
colorful text and visual designs or bright, narrow beams of colored light. The Nexus™ Aq 5x5
operates in Standalone and Master/Slave modes and with the Art-Net™, Kling-Net, or DMX
protocols. The Nexus™ Aq 5x5 panels have coffin locks so they can be hung vertically, and
locking bolt connectors so they can be connected horizontally.
•Twenty-five 10 watt RGBW LEDs
•Pixel mapping capability
•Operates in Standalone and Master/Slave modes
•Operates with Art-Net™, Kling-Net, or DMX protocols using 3Ch, 4Ch, 6Ch, 10Ch, 15Ch,
75Ch, 100Ch, 105Ch, 111Ch, HSV, and HSI DMX personalities
•Integrated locks for hanging and aligning panels in large arrays
•Compatible with the Nexus™ Aw 7x7
•Universal power and control cabling with Neutrik® powerCON®, Neutrik® etherCON®
ports, and both 3- and 5-pin DMX ports

Introduction
-6- Nexus™ Aq 5x5 User Manual Rev. 2
Overview
Front View Side View
Rear View
LEDs (x25)
Control Panel
Power Sockets and
Fuse Holder
5-Pin DMX Ports
3-Pin DMX Ports
Neutrik®
etherCON® I/O
Coffin Locks
(x4)
Mounting Bracket
Bracket Adjustment Knob
Male Locking Bolt
Connectors x2
Male
Locking Bolt
Connectors x2
(Female on other
side)
Male Coffin
Locks x2
Female Coffin
Locks x2
Female Locking Bolt
Connectors x2

Introduction
Nexus™ Aq 5x5 User Manual Rev. 2 -7-
Dimensions
Pixel Layout
2 3 4 5
6 7 8 9 10
11
12 13 14 15
16 17 18 19 20
21 22
23
24 25
1

Setup
-8- Nexus™ Aq 5x5 User Manual Rev. 2
3.Setup
AC Power
AC Plug
Fuse
Replacement
The Nexus™ Aq 5x5 has an auto-ranging power supply that works with an input voltage range
of 100 to 240 VAC, 50/60 Hz. To determine the power requirements for the Nexus™ Aq 5x5,
refer to the label on to the product or Technical Specifications in this manual.
The listed current rating indicates the maximum current draw during normal operation. For
more information, download Sizing Circuit Breakers from the Chauvet website
www.chauvetprofessional.com.
•Always connect this product to a protected circuit with an appropriate electrical
ground.
•Never connect this product to a rheostat (variable resistor) or dimmer circuit.
The Nexus™ Aq 5x5 comes with a power input cord terminated with a Neutrik® powerCON®
connector on one end, and an Edison plug on the other end (U.S. market). If the power input
cord that came with the Nexus™ Aq 5x5 panel has no plug or there is the need to change the
plug, use the table below to wire a new plug.
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow or Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
The fuse is a T 3.15 A, 250 V and it is located in a fuse holder next to the etherCON® power
ports. To replace the fuse, do the following:
1. Disconnect the product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder cap.
3. Remove the blown fuse and replace it with a good fuse of the same type and rating
4. Screw the fuse holder cap back in place
5. Reconnect the product to power.
•Make sure to disconnect the power before replacing a blown fuse.
•Always replace a blown fuse with a fuse of the same type and rating.

Setup
Nexus™ Aq 5x5 User Manual Rev. 2 -9-
Power
Linking
Power Linking
Diagram
The Nexus™ Aq 5x5 supports power linking of up to:
•5 products at 120 V,
•8 products at 208 V, or
•9 products at 230 V.
A power cord is included but power-linking cables are not included. For power-linking cables,
see the Chauvet website at www.chuavetlighting.com.

Setup
-10- Nexus™ Aq 5x5 User Manual Rev. 2
DMX Linking
DMX Linking
Diagram
DMX linking connects Nexus™ Aq 5x5 panels through their DMX In and Out ports.
Nexus™ Aq 5x5 has both 3- and 5-pin DMX ports, so either 3- or 5-pin cables, or a
combination of both, can be used. DMX linking is for DMX controllers and for Master/Slave
control.
DMX Controller or Master
Other DMX Products

Setup
Nexus™ Aq 5x5 User Manual Rev. 2 -11-
DMX Mode
Master/Slave
Mode
In DMX mode, Nexus™ Aq 5x5 panels are controlled by a DMX controller, and the DMX
address and DMX personality must be set through the control panel.
The Nexus™ Aq 5x5 automatically senses its control source. When there is a DMX cable
plugged in, the Nexus™ Aq 5x5 responds to a DMX controller or Master/Slave mode. When
there is an etherCON® cable plug in, the Nexus™ Aq 5x5 responds to an IP protocol, such as
Art-Net™ or Kling-Net.
The Nexus™ Aq 5x5 has 11 DMX personalities, each with different capabilities. The table
below lists the capabilities of each personality. For more information, see DMX Address and
DMX Personality in the Menu Operations section of this manual.
Personality
Capabilities
HSV
Hue, saturation, and value
HSI
Hue, saturation, and intensity
3-channel
Full panel RGB color mixing, Auto Color function
4-channel
Full panel RGBW color mixing
6-channel
Full panel RGBW color mixing, strobing, and dimming
10-channel Full panel RGBW color mixing, auto programs, color macros, strobing, and
dimming
15-channel
Full panel RGBW color mixing, strobing, color macros, and virtual gobo
75-channel
RGB color mixing with individual pixel control, Auto Color function
100-channel
RGBW color mixing with individual pixel control
105-channel
RGBW color mixing with individual pixel control, auto programs, strobing, and
dimming
111-channel
RGBW color mixing with individual pixel control, color macros, virtual gobo,
strobing, and dimming
In Master/Slave mode, one Nexus™ Aq 5x5 panel (the master) controls one or more Nexus™
Aq 5x5 panels (the slaves) without a DMX controller. The master panel is set to an auto
program or static color, and sends DMX to the slaves. During Master/Slave operation, the
slave products operate in unison with the master. For more information, see Master/Slave
Mode.
•Do not connect a DMX controller to the DMX chain when operating Nexus™ Aq 5x5
products in Master/Slave mode, because signals from the master and the DMX
controller will conflict and cause erratic behavior in all the products.
•Master/Slave operates via DMX ports only. The Neutrik® etherCON® ports cannot be
used for Master/Slave mode.
For more information about DMX, see the Chauvet DMX primer, available at
www.chauvetlighting.com.

Setup
-12- Nexus™ Aq 5x5 User Manual Rev. 2
Ethernet
Connections
Ethernet
Connections
Diagram
Kling-Net Mode
Art-Net™ Mode
Ethernet connections link Nexus™ Aq 5x5 to routers and each other through their Neutrik®
etherCON® ports. Ethernet connections are for running TCP/IP-based control systems, such
as Kling-Net and Art-Net™. All Neutrik® etherCON® ports can be either input or output ports,
and panels can be linked to each other, but the start of each chain of panels must be a router
port.
•Do not connect Nexus™ Aq 5x5 to the WAN port of the router.
•Each Nexus™ Aq 5x5 contains a powered switch, which amplifies the signal as it
passes through.
Kling-Net is a network protocol that uses TCP/IP to send DMX over a network and into the
Neutrik® etherCON® connection ports of the Nexus™ Aq 5x5 panels. Kling-Net works
seamlessly with Kling-Net-supported ArKaos software for configuring and mapping display
devices. For more information, see Kling-Net Configuration.
Kling-Net requires a gigabit per second (1000 Mbps) Ethernet card and network router.
Art-Net™ is an Ethernet protocol that uses TCP/IP to send DMX signals over a network and
into the Neutrik® etherCON® connection ports of the Nexus™ Aq 5x5 panels. Art-Net™
requires configuration through the control panel. For more information, see Setting Ethernet
Protocols and Art-Net™.
For more information about Art-Net™, see the Art-Net™ protocol document available on the
Chauvet website at www.chauvetprofessional.com.
Nexus™ Aq 5x5 panels do not work with Art-Net™ controllers sending in Broadcast
mode. Nexus™ Aq 5x5 is designed to work with UNICAST controllers. For information
about the controller’s mode, see the controller’s User Manual
Computer or Controller
Running TCP/IP based
protocol, such as
Kling-Net or Art-Net™
Nexus™ Aq 5x5 Panels
Router
More
Products
NOTE: Do Not Use WAN Port On Router!

Setup
Nexus™ Aq 5x5 User Manual Rev. 2 -13-
Setting
Modes And
Protocols
The Nexus™ Aq 5x5 automatically senses whether control is coming from a DMX source, or a
Network source. When there is a Neutrik® etherCON® cable plug into it, the Nexus™ Aq 5x5
responds to a TCP/IP protocol, such as Art-Net™ or Kling-Net, depending on the setting in the
control panel. If there is a DMX cable plugged into it, the Nexus™ Aq 5x5 responds to a DMX
controller or Master/Slave control, depending on the settings in the control panel.
The Nexus™ Aq 5x5 can receive control from only one set of ports, either the DMX ports or
the Neutrik® etherCON® ports. The Nexus™ Aq 5x5 senses which ports are used on power-
up, so the panel cannot be changed from DMX to TCP/IP, or from TCP/IP to DMX while it is
turned on.
To switch from one set of ports to another (one control type to another):
1. Disconnect the Nexus™ Aq 5x5 from power.
2. Switch the control cables.
3. Reconnect the Nexus™ Aq 5x5 to power.
A DMX personality must be set for all modes – DMX, Art-Net™, or Kling-Net. For more
information, see DMX Personality.
Kling-Net has no settings to configure, but it must be selected through the control panel. For
more information, see Setting Ethernet Protocols and Kling-Net.
Art-Net™ has a number of settings that must be configured through the control panel. For
more information, see Setting Ethernet Protocols and Art-Net™.
•When a DMX controller is sending signal to the DMX ports and there is nothing in the
Neutrik® etherCON® ports, any Ethernet settings in the control panel will be
ignored.
•When a TCP/IP controller is sending signal to the Neutrik® etherCON® ports and
there is nothing in the DMX ports, the DMX personality will be recognized by the
TCP/IP controller.
•Do not connect both DMX and Neutrik® etherCON® cables; use one or the other.

Setup
-14- Nexus™ Aq 5x5 User Manual Rev. 2
Mounting
Orientation
Rigging
Mounting
Diagram With
Affinity™ Rig Kit
Before mounting the Nexus™ Aq 5x5, review the Safety Notes section. Read and follow the
guidelines below for mounting the Nexus™ Aq 5x5.
•When selecting a desired location and before installation, consider easy access to this
product for operation, programming adjustments, and routine maintenance.
•Mount in a way that allows adequate ventilation around the product.
•Do not mount near flammable materials as indicated in the Safety Notes section.
•Do not mount where there is rain, high humidity, or extreme temperature change.
•Make sure that the mounting structure can support the weight of the Nexus™ Aq 5x5. See
Technical Specifications for information on weight.
•Always secure product to a fastening device using a safety cable.
Nexus™ Aq 5x5 panels are hung in vertical rows and connected horizontally.
Nexus™ Aq 5x5 panels are rigged using the Chauvet Affinity™ Rig Kit or a mounting clamp,
both of which are sold separately. The Rig Kit can bear the weight of 16 panels, in 1 column of
16, or 2 columns of 8. The rig kit has 3 holes for M12-compatible bolts and works with most
standard truss clamps. When using a mounting clamp, it can bear the weight of 4 panels hung
in a single column.
The coffin locks on the top and bottom of the Nexus™ Aq 5x5 panels connect the tops and
bottoms, and bear the weight, of the panels. The locking bolt connectors on the sides connect
the panels and align the pixels into rows. They cannot bear the weight of the panels
The locking bolt connectors on the sides of the Nexus™ Aq 5x5 panels are not load-
bearing connectors. Do not hang Nexus™ Aq 5x5 sideways.
Connect Up To 16 panels
in 2 columns of 8
Connect Up To 16 panels
in 1 column of 16
Rig Kit Attached
To 2 Panels
Rig Kit Attached
To 1 Panel
Coffin Locks
Locking Bolt
Connectors

Setup
Nexus™ Aq 5x5 User Manual Rev. 2 -15-
Mounting Diagram
With Mounting
Clamp
Horizontal Panel
Connection
Position The Bracket
At The Top Of The
Panel
Up To 4 Panels In A
Single Column
Mounting Clamp
(such as CHAUVET® CLP-15)
Into Bracket
Bottom Of Panel
Top Of Panel
#8 Allen Key
With Handle

Operation
-16- Nexus™ Aq 5x5 User Manual Rev. 2
4.Operation
Control Panel
Button
Function
<MENU/ESC>
Scrolls through the main menu options or exits the current menu option
<ENTER>
Enters into the highlighted menu option or sets the currently selected value
<UP>
Navigates up through a list of menu options or values
<DOWN>
Navigates down through a list of menu options or values
To select a main menu option, press <MENU/ESC>repeatedly, or press <MENU/ESC>once
and then press <UP> or <DOWN>.
To enter a menu option, press <ENTER>.
To find a sub-menu or a programming value, press <UP> or <DOWN> until the menu or value
is highlighted. Press <ENTER> to enter the sub-menu or select the value.
To exit back to the home screen, press and hold <MENU/ESC> until the home screen
appears.
The home screen on the control panel display is what shows when the menu is left idle. The
home screen includes the current operating mode, the current DMX personality (referred to as
mode on the display), and the current temperature of the Nexus™ Aq 5x5.
The following Menu Map shows the main levels and the programming levels for each option.
Changes to the settings are activated when the control panel display returns to the
home screen. To return the control panel display to the home screen, press and hold
<MENU/ESC> until the home screen appears.

Operation
Nexus™ Aq 5x5 User Manual Rev. 2 -17-
Menu Map
The Menu Map below applies only to Software Version 1.1
Main Level
Programming Levels
Description
Auto Show
Auto 0–9
Speed 000–100
Selects auto programs and its speed
Fade
Selects color fade and its speed
Static
Fixture Color
R
Selects a preset color
G
B
W
GB
RB
RG
RGB
RW
GW
BW
RGW
RBW
GBW
RGBW
Manual Color
Red
000–255 Sets color levels for manual color mixing
Green
Blue
White
Dimmer Mode
Off
Sets dimming curve
Dimmer 1–3
Back Lite
On
Sets control panel backlight on time
10S
20S
30S
Information
Auto Test
Starts a self-test
Fixture Hours
Shows total operating hours
Version
Shows software version
IP Address
Shows IP address
Device ID
Shows ID number
DMX Address
001–512
Sets DMX starting address

Operation
-18- Nexus™ Aq 5x5 User Manual Rev. 2
Main Level
Programming Levels
Description
DMX Channel
3Ch
Sets DMX personality for DMX, Art-Net™ mode, and
Kling-Net mode
4Ch
6Ch
10Ch
15Ch
75Ch
100Ch
105Ch
111Ch
HSV
HSI
Master/Slave
Master
Sets Master mode
Slave
Sets Slave mode
White Balance
Red
125–255 Sets red, green, and blue maximum values for white
balance
Green
Blue
Temperature
Shows product’s internal temperature
Fan Setup
Auto
Sets fan to stop if the product is cool
High
Sets fan to run continuously
Ethernet Settings Protocol
Kling-Net
Sets Kling-Net protocol
Art-Net
IP Mode
Static
Sets product to use its internal IP address
DHCP
Sets product to use dynamic IP addressing
Manual
Sets product to use manual IP addressing
Net
000–127
Sets the net address of the product
Subnet
00–15
Sets the subnet of the product
Universe
Sets the universe of the product
Start
Channel
1–512 Sets the DMX start channel of the product