Chauvet Professional Ovation F-55FC User manual

User Manual

Ovation F-55FC User Manual Rev. 1
Edition Notes
The Ovation F-55FC User Manual includes a description, safety precautions, installation, programming,
operation and maintenance instructions for the Ovation F-55FC as of the release date of this edition.
Trademarks
CHAUVET, the Chauvet logo and Ovation F-55FC are registered trademarks or trademarks of Chauvet &
Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company
and product names and logos referred to herein may be trademarks of their respective companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited to, all design, text and images
are owned by Chauvet.
© Copyright 2018 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States ofAmerica.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information purposes
only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this
manual or its content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4
paper (210 x 297 mm), configure the printer to scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should completely read through the guide
that shipped with the product, as well as this manual, before installing, operating, or maintaining this
product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetprofessional.com.
Document Revision
This Ovation F-55FC User Manual is the 1
st
edition of this document. Go to www.chauvetprofessional.com
for the latest version.

Ovation F-265WW User Manual Rev. 1
Table of Contents
i
TABLE OF CONTENTS
1. Before You Begin....................................................................... 1
What Is Included ........................................................................................... 1
Claims........................................................................................................... 1
Manual Conventions ..................................................................................... 1
Symbols ........................................................................................................ 1
Safety Notes.................................................................................................. 2
Personal Safety.............................................................................................................. 2
Mounting and Rigging.................................................................................................... 2
Power and Wiring........................................................................................................... 2
Operation ...................................................................................................... 2
Expected LED Lifespan................................................................................. 2
2. Introduction ................................................................................ 3
Description.................................................................................................... 3
Product Overview.......................................................................................... 3
Product Dimensions...................................................................................... 4
3. Setup ........................................................................................... 5
AC Power...................................................................................................... 5
AC Plug.......................................................................................................................... 5
DMX Linking.................................................................................................. 5
DMX Personalities.......................................................................................................... 5
Remote Device Management (RDM)............................................................ 5
Virtual Color Wheel........................................................................................................ 5
Color Temperature Chart............................................................................................... 6
Mounting ....................................................................................................... 7
Orientation...................................................................................................................... 7
Rigging........................................................................................................................... 7
Procedure....................................................................................................................... 7
4. Operation .................................................................................... 8
Control Panel Operation................................................................................ 8
Control Options............................................................................................. 8
Programming................................................................................................. 8
Menu Map..................................................................................................... 8
Configuration (DMX) ..................................................................................... 10
Control Personalities...................................................................................................... 10
Starting Address............................................................................................................. 11
DMX Values.................................................................................................. 12
15Ch............................................................................................................................... 12
13Ch............................................................................................................................... 12
12Ch............................................................................................................................... 12
10Ch............................................................................................................................... 13
7Ch................................................................................................................................. 13
5Ch................................................................................................................................. 13
3Ch................................................................................................................................. 14
HSV................................................................................................................................ 14
Configuration (Standalone)............................................................................................ 14
Static Mode.................................................................................................................... 14
Auto Programs............................................................................................................... 14
Master/Slave.................................................................................................................. 15
Dimmer Profiles.............................................................................................................. 15
White Balance................................................................................................................ 15
LED Frequency.............................................................................................................. 15
Back Light ...................................................................................................................... 15

Table of Contents
Ovation F-265WW User Manual Rev. 1
ii
System Information........................................................................................................ 15
Factory Reset................................................................................................................. 15
5. Technical Information................................................................ 16
Product Maintenance.................................................................................... 16
6. Technical Specifications ........................................................... 17
Photometrics Charts...................................................................................... 18
7. Returns........................................................................................ 19
8. Contact Us .................................................................................. 20

Page 1 of 20
Ovation F-55FC User Manual Rev. 1
BEFORE YOU BEGIN
1. Before You Begin
What Is Included
Claims
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Manual Conventions
Symbols
• Ovation F-55FC
•GelFrame • Warranty Card • Quick Reference Guide
Convention Meaning
1–512 A range of values
50/60 Aset of values of which only one can be chosen
<SET> A button on the product’s control panel
Settings A product function or a menu option
Symbol Meaning
Electrical warning. Not following these instructions may cause electrical damage to
the product, accessories, or the user.
Critical installation, configuration, or operation information. Not following these
instructions may makethe product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function
correctly if this information is not used.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A
digital data transmission protocol.

Page 2 of 20
BEFORE YOU BEGIN
Ovation F-55FC User Manual Rev. 1
Safety Notes
Read all the following safety notes before working with this product. These notes contain important
information about the installation, usage, and maintenance of this product.
Personal Safety
• Avoid direct eye exposure to the light source while the product is on.
• Always disconnect the product from the power source before cleaning or replacing the fuse.
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Do not touch the product’s housing when operating because it may be very hot.
Mounting and Rigging
• This product is not intended for permanent installation.
• This product is for indoor use only! To prevent risk of fire or shock, do not expose this product to
rain or moisture. (IP20)
• CAUTION: When transferring product from extreme temperature environments, (e.g. cold truck to
warm humid ballroom) condensation may form on the internal electronics of the product. To avoid
causing a failure, allow product to fully acclimate to the surroundingenvironment before connecting
it to power.
• Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent
surfaces.
• Make sure there are no flammable materials close to this product while it is operating.
• When hanging this product, always secure to a fastening device using a safety cable.
• Never carry the product by the power cord.
Power and Wiring
• Make sure the power cord is not crimped or damaged.
• Always make sure you are connecting this product to the proper voltage in accordance with the
specifications in this manual or on the product’s specification label.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
• Never connect this product to a dimmer pack or rheostat.
• Make sure to replace the fuse with another of the same type and rating.
• Never disconnect this product by pulling or tugging on the power cable.
Operation
• Donotoperatethisproduct if thereisdamageonthehousing,lenses,orcables.Havethedamaged
parts replaced by an authorized technician at once.
• Do not cover the ventilation slots when operating to avoid internal overheating.
• The maximum ambienttemperature is 113 °F (45 °C). Do notoperate the productat higher temperatures.
• In the event of a serious operation problem, stop using this product immediately!
Expected LED Lifespan
LEDs gradually decline in brightness over time, primarily because of heat. LEDs that are arranged in
clusters experience higher operating temperatures than single LEDs. For this reason, operating clustered
LEDs at their fullest intensity significantly reduces the LEDs’ lifespan. Under normal conditions, this
lifespan is 40,000 to 50,000 hours. If extending this lifespan is vital, lower the operating temperature by
improving the ventilation around the product, thus reducing the ambient temperature. In addition, limiting
the overall projection intensity may extend the LEDs’ lifespan.
This product contains no user-serviceable parts. Any reference to servicing in
this User Manual will only apply to properly trained, certified technicians. Do not
open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this
product.
If your Chauvet product requires service, contact Chauvet Technical Support.

Page 3 of 20
Ovation F-55FC User Manual Rev. 1
Introduction
2. Introduction
Description
The Ovation F-55FC is a full color RGBAL LED inkie Fresnel-style fixture. The Virtual Color Wheel and
Color Temperature presets are shared from our other full color Ovation fixtures. A manual zoom with a 32°
– 87° field angle allows the product to have a soft field of light when needed.
• Operating modes:
• 3Ch: dimmer, virtual color wheel, color temperature
• 5Ch: RGBAL
• 7Ch: RGBAL, dimmer, strobe
• 10Ch: 16-bit dimmer, RGBAL, virtual color wheel, color temperature, strobe
• 12Ch: RGBAL, dimmer, virtual color wheel, color temperature, strobe, auto program,
auto speed, dimmer speed.
• 13Ch:16-bit RGBAL and dimmer, strobe
• 15Ch: 16-bit RGBAL and dimmer, virtual color wheel, color temperature, strobe
• HSV: 3-channel: hue, saturation, value
Product Overview
Menu Buttons
Manual Zoom
Control Knob
Fixed Power Cord
Fuse Holder
Display
Mounting Bracket
Dimmer
knob
Bracket Adjustment
Knob
DMX Cords

Page 4 of 20
Introduction
Ovation F-55FC User Manual Rev. 1
Product Dimensions
4.64 in
118.4 mm
6.53 in
166.3 mm
6.79 in
172.6 mm
3.3 in
84 mm
9.64 in
245 mm

Page 5 of 20
Ovation F-55FC User Manual Rev. 1
Setup
3. Setup
AC Power
Each Ovation F-55FC This product has an auto-ranging power supply that can work with an input voltage
range of 100–240 VAC, 50/60 Hz.
AC Plug
DMX Linking
The Ovation F-55FC will work with a DMX controller using a 5-pin DMX serial connection.ADMX Primer is
available from
www.chauvetprofessional.com.
DMX Personalities
The Ovation F-55FC uses a 5-pin DMX for its DMX personalities: 3, 5, 7, 10, 12, 13, 15, or HSV. Refer to
the Introduction chapter for a brief description of each DMX personality.
• Refer to the Operation chapter to learn how to configure the Ovation F-55FC to work in these
personalities.
•TheDMX Values section provides detailed information regarding the control personalities.
Remote Device Management (RDM)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate
bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the
manufacturer as not all DMX controllers have this capability. The Ovation F-55FC supports RDM protocol
that allows feedback to make changes to menu map options.
Virtual Color Wheel
The Ovation F-55FC includes a feature called the Virtual Color Wheel (VCW).This feature is available as a
stand-alone control mode for manual use and also as a control channel in select DMX personalities. Over
30 pre-mixed colors, custom blended by our engineers, are available to call up for easier programming.
The DMX values used to mix these colors are provided below. You may adjust the overall intensity of the
Ovation fixture in order to more closely replicate colors you are familiar with. A chart is available on our
website www.chauvetprofessional.com to compare our pre-mixed colors with popular gel colors. This chart
is for comparison purposes only and is not a representation that our pre-mixed colors match any of the gel
colors listed.
• Always connect the product to a protected circuit (circuit breaker or fuse). Make
sure the product has an appropriate electrical ground to avoid the risk of
electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
If you are not familiar with or need more information about DMX standards, Master/
Slave connectivity, or the DMX cables needed to link this product to a DMX controller,
download the DMX Primer from the Chauvet website: www.chauvetprofessional.com.
•TheOperation section of this manual provides detailed instructions on how to
configure the master and slaves.
• If you are not familiar with or need more information about DMX standards, or the
DMX cables needed to link this product to a DMX controller, download the DMX
Primer from the Chauvet website: www.chauvetprofessional.com.

Page 6 of 20
Setup
Ovation F-55FC User Manual Rev. 1
Color Chart
Color Temperature Chart
DMX
Channel
Value Display Readout Red
Value Green Value Blue Value Amber Value Lime Value
000 005
006 013
014 021
022 028
029 035
036 043
044 051
052 059
060 067
068 075
076 083
084 091
092 099
100 107
108 115
116 121
122 130
131 138
139 146
147 154
155 162
163 170
171 178
179 186
187 194
195 202
203 210
211 218
219 226
227 234
235 242
243 250
251 255
--
C3050 - Md Yellow
C3040 - Lt Yellow
C3240 - Amb Yellow
C2340 - VLt Amber
C2040 - Lt Amber
C2050 - Md Amber
C2060 - Dk Amber
C1050 - Lt Red
C1080 - Md Red
C1020 - NC Pink
C1030 - Md Pink
C1630 - Dk Pink
C1250 - Md Red Amber
C1060 - Dk Red Amber
C1650 - Magenta
C6170 - Dk Magenta
C6020 - Lt Lavender
C5030 - Lt Blue
C5020 - VLt Blue
C5430 - Lt Blue 2
C5070 - Blue
C5050 - Md Blue
C5060 - Dk Blue
C5690 - Indigo
C5080 - VDk Blue
C5081 - VDk Blue 2
C4370 - Yel Green
C4070 - Green
C4550 - Turquoise
C4560 - Aqua
C4570 - Blue Green
--
000
233
224
180
245
230
255
255
255
255
238
255
255
255
255
255
255
127
000
158
000
043
000
000
065
000
040
027
049
060
020
000
000
000
163
158
060
107
130
000
000
037
004
135
131
165
000
000
050
035
122
255
255
255
255
255
210
000
203
199
255
255
230
240
255
000
000
020
047
000
081
062
025
024
027
017
129
120
123
041
045
115
117
142
197
189
180
210
218
206
210
230
240
028
055
109
126
079
000
000
123
255
245
255
255
255
255
030
000
255
255
255
195
120
255
000
251
100
000
000
043
000
000
040
000
000
016
120
000
036
030
000
000
255
231
255
213
155
194
150
038
000
255
195
210
055
030
115
000
255
255
255
243
036
181
118
055
040
045
104
090
245
255
053
000
Note: The colors above are simulated renditions of the color output produced as
compared to other similar incandescent products. Chauvet makes no guarantee of
the color output accuracy.
DMX Channel
Value Display Readout Red Value Green Value Blue Value Amber Value Lime Value
000 005
006 025
026 050
051 075
076 100
101 125
126 150
151 175
176 200
201 225
226 255
--
2800K
3200K
3500K
4000K
4500K
5000K
5600K
6000K
6500K
--
000
255
253
234
204
181
160
138
147
142
000
000
199
247
255
255
248
255
255
255
251
000
000
107
129
141
156
166
180
191
193
197
000
000
253
255
253
243
224
241
241
203
187
000
000
255
255
255
255
255
255
255
255
255
000
Note: The color temperatures above are simulated renditions of the color output
produced as compared to a tungsten lamp at the specified color temperature.
Chauvet makes no guarantee of the color output accuracy.

Page 7 of 20
Ovation F-55FC User Manual Rev. 1
Setup
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
For our CHAUVET Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position, making sure there is adequate room for ventilation,
configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
• Before deciding on a location for the product, make sure there is easy access to the product for
maintenance and programming purposes.
• Make sure that the structure onto which you are mounting the product can support the product’s
weight. See the Technical Specifications for weight information.
• When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
• When power linking multiple products, mount the products close enough for power linking cables to
reach.
• The bracket adjustment knobs allow for directional adjustment when aiming the product to the
desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the
knobs.
Procedure
The Ovation F-55FC comes with a bracket to which you can attach a mounting clamp directly. You must
supply the mounting clamps. Make sure the clamps are capable of supporting the weight of this product.
Use at least one mounting point per product. For the CHAUVET Professional line of mounting clamps, go
to http://www.trusst.com/products.
Mounting Diagram
Mounting Bracket
Mounting Clamp
Bracket Adjustment Knobs
Safety Cables

Page 8 of 20
Operation
Ovation F-55FC User Manual Rev. 1
4. Operation
Control Panel Operation
Control Options
Set the Ovation F-55FC starting address in the 001–512 DMX range. This enables control of up to 34
products in the 15-channel personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main level and a
variable number of programming levels for each option.
• To go to the desired main level, press <MENU> repeatedly until the option shows on the display.
Press <ENTER> to select. This will take you to the first programming level for that option.
• To select an option or value within the current programming level, press <UP> or <DOWN> until
the option shows on the display. Press <ENTER> to select. In this case, if there is another
programming level, you will see that first option, or you will see the selected value.
• Press <MENU> repeatedly to exit to the previous main level.
Menu Map
Button Function
<MENU> Exits from the current menu or function
<UP> Navigates upward through the menu list or increases the numeric value when in a function
<DOWN> Navigates downward through the menu list or decreases the numeric value when in a function
<ENTER>
Enables the currently displayed menu or sets the currently selected value in to the current function
Knob 1 Push then turn to increase or decrease the dimmer
Knob 2 Push then turn to increase or decrease the zoom
Main Level Programming Levels Description
DMX
Address Address 001–498 Selects starting address
(*highest channel
restricted to personality
chosen)
DMX
Channel
3CH 3-channel: dimmer, virtual color wheel, color
temperature
5CH 5-channel: RGBAL
7CH 7-channel: RGBAL,
dimmer, strobe
10CH 10-channel: 16-bit
dimmer, RGBAL, virtual
color wheel, color
temperature, strobe
12CH
12-channel: RGBAL,
dimmer, virtual color
wheel, color
temperature, strobe,
auto program, auto
speed, dimmer speed
13CH 13-channel: 16-bit RGBAL and dimmer,
strobe
15CH 15-channel: 16-bit
RGBAL and dimmer,
virtual color wheel, color
temperature, strobe
HSV 3-channel: hue,
saturation, value

Page 9 of 20
Ovation F-55FC User Manual Rev. 1
Operation
VCW
(VirtualColor
Wheel)
C3050 - Md Yellow
Dimmer 000-255
Virtual Color Wheel
simulates the output of
each gel color. Refer to
the Virtual Color Wheel
Chart section for
specific values.
C3040 - Lt Yellow
C3240 - Amb Yellow
C2340 - VLt Amber
C2040 - Lt Amber
C2050 - Md Amber
C2060 - Dk Amber
C1050 - Lt Red
C1080 - Md Red
C1020 - NC Pink
C1030 - Md Pink
C1630 - Dk Pink
C1250 - Md Red Amber
C1060 - Dk Red Amber
C1650 - Magenta
C6170 - Dk Magenta
C6020 - Lt Lavender
C5030 - Lt Blue
C5020 - VLt Blue
C5430 - Lt Blue 2
C5070 - Blue
C5050 - Md Blue
C5060 - Dk Blue
C5690 - Indigo
C5080 - VDk Blue
C5081 - VDk Blue 2
C4370 - Yel Green
C4070 - Green
C4550 - Turquoise
C4560 - Aqua
C4570 - Blue Green
CCT
(Color
Temperature)
2800K Preset white color
temperatures. Emulates
a tungsten lamp at the
specified color
temperature. Refer to
the Preset Color
Temperature Chart
section for specific
values.
3200K
3500K
4000K
4500K
5000K
5600K
6000K
6500K
MCM
(Manual Color
Mixer)
Red
000-255 Combine red, green,
blue, amber, and lime to
make a custom color
(0–100%)
Green
Blue
Amber
Lime
Auto Show
Auto 1
1-100 Selects automatic programs and auto
program speed
Auto 2
Auto 3
Auto 4
Auto 5
Master/Slave Master Master mode
Slave Slave mode
Main Level Programming Levels Description

Page 10 of 20
Operation
Ovation F-55FC User Manual Rev. 1
Configuration (DMX)
Use control configurations to operate the product with a DMX controller.
Control Personalities
This setting allows you to choose a particular control personality.
1. Go to the DMX Personality main level.
2. Select the desired personality (see table below).
Dimmer
Mode
Off Linear dimmer
Dimmer 1 Fast dimmer curve
Dimmer 2 Medium dimmer curve
Dimmer 3 Slow dimmer curve
White
Balance
Off Uses factory default
white setting
Manual
Red
125–255
Sets red LED maximum
value
Green Sets green LED
maximum value
Blue Sets blue LED
maximum value
Amber Sets amber LED
maximum value
Lime Sets lime LED
maximum value
LED
Frequency
600Hz
Selects the PWM output
frequency
1200Hz
2000Hz
4000Hz
6000Hz
25KHz
Back Light
On Displaybacklightalways
on
10S Turns off display backlight after 10 sec of
inactivity
20S Turns off display backlight after 20 sec of
inactivity
30S Turns off display backlight after 30 sec of
inactivity
Information
Fixture Hours _ _ _ _ Shows total product
hours
Version V_._-V_ _ Shows installed
software version
UID _ _ _ _ _ _ _ _ _ _ _ _ Shows product UID
Factory
Setting No Reset to factory defaults
Yes
Personality Channels
3Ch: dimmer,
virtual color wheel,
color temperature 3
5Ch: RGBAL 5
7Ch: RGBAL,
dimmer, strobe 7
Main Level Programming Levels Description

Page 11 of 20
Ovation F-55FC User Manual Rev. 1
Operation
Starting Address
Each product will respond to a unique starting address from the DMX controller. All products with the same
starting address will respond in unison.
1. Go to the DMX Address main level.
2. Select the starting address (001–512).
The highest recommended starting address for each DMX mode is as follows:
10Ch: 16-bit
dimmer, RGBAL,
virtual color wheel,
color temperature,
strobe
10
12Ch: RGBAL,
dimmer, virtual
color wheel, color
temperature,
strobe, auto
program, auto
speed, dimmer
speed.
12
13Ch:16-bitRGBAL
and dimmer, strobe 13
15Ch:16-bitRGBAL
anddimmer, virtual
color wheel, color
temperature,
strobe
15
HSV: hue,
saturation, value 3
•SeetheStartingAddresssection forthe higheststartingaddressyou canselect for each
personality.
• Make sure that the starting addresses on the various products do not overlap due to the
new personality setting.
Personality Address
15 Ch 497
13 Ch 499
12 Ch 500
10 Ch 502
7 Ch 505
5 Ch 507
3 Ch 509
HSV 509
Personality Channels

Page 12 of 20
Operation
Ovation F-55FC User Manual Rev. 1
DMX Values
15Ch
13Ch
12Ch
Channel Function Value Percent/Setting
1 Dimmer 000 255 0-100%
2 Dimmer Fine 000 255 0-100%
3Red000 255 0-100%
4 Red Fine 000 255 0-100%
5 Green 000 255 0-100%
6 Green Fine 000 255 0-100%
7Blue000 255 0-100%
8 Blue Fine 000 255 0-100%
9Amber000 255 0-100%
10 Amber Fine 000 255 0-100%
11 Lime 000 255 0-100%
12 Lime Fine 000 255 0-100%
13 Strobe 000 010
011 255 No function
Strobe, slow to fast
14 Virtual Color
Wheel 1 000 255 Refer to the Virtual Color Wheel Chart section for
specific values
15 Color Temperature
1
000 255 Refer to the Preset Color Temperature Chart section for
specific values
Channel Function Value Percent/Setting
1 Dimmer 000 255 0-100%
2 DimmerFine 000 255 0-100%
3Red000 255 0-100%
4 Red Fine 000 255 0-100%
5 Green 000 255 0-100%
6 Green Fine 000 255 0-100%
7Blue000 255 0-100%
8 Blue Fine 000 255 0-100%
9Amber000 255 0-100%
10 Amber Fine 000 255 0-100%
11 Lime 000 255 0-100%
12 Lime Fine 000 255 0-100%
13 Strobe 000 010
011 255 No function Strobe, slow to fast
Channel Function Value Percent/Setting
1 Dimmer 000 255 0-100%
2Red000 255 0-100%
3 Green 000 255 0-100%
4Blue000 255 0-100%
5Amber000 255 0-100%
6Lime000 255 0-100%
7 Strobe 000 010
011 255 No function
Strobe, slow to fast
8Virtual Color
Wheel 1 000 255 Refer to the Virtual Color Wheel Chart section for
specific values
9Color Temperature
1
000 255 Refer to the Preset Color Temperature Chart section for
specific values

Page 13 of 20
Ovation F-55FC User Manual Rev. 1
Operation
10Ch
7Ch
5Ch
10 Auto
Programs
000 010
011 060
061 110
111 160
161 210
211 255
No function
Auto program 1
Auto program 2
Auto program 3
Auto program 4
Auto program 5
11 Auto Speed 000 255 0-100%
12 Dimmer
Speed Mode
000 051
052101
102 152
153 203
204 255
Preset dimmer speed from display menu
Linear dimmer
Nonlinear dimming curve 1 (fastest)
Nonlinear dimming curve 2
Nonlinear dimming curve 3 (slowest)
Channel Function Value Percent/Setting
1 Dimmer 000 255 0-100%
2 Dimmer Fine 000 255 0-100%
3Red000 255 0-100%
4Green000 255 0-100%
5Blue000 255 0-100%
6Amber000 255 0-100%
7Lime000 255 0-100%
8 Strobe 000 010
011 255 No function
Strobe, slow to fast
9Virtual Color
Wheel 1 000 255 Refer to the Virtual Color Wheel Chart section for
specific values
10 Color Temperature
1
000 255 Refer to the Preset Color Temperature Chart section for
specific values
Channel Function Value Percent/Setting
1 Dimmer 000 255 0-100%
2Red000 255 0-100%
3Green000 255 0-100%
4Blue000 255 0-100%
5Amber000 255 0-100%
6Lime000 255 0-100%
7 Strobe 000 010
011 255 No function Strobe, slow to fast
Channel Function Value Percent/Setting
1Red000 255 0-100%
2Green000 255 0-100%
3Blue000 255 0-100%
4Amber000 255 0-100%
5Lime000 255 0-100%
Channel Function Value Percent/Setting

Page 14 of 20
Operation
Ovation F-55FC User Manual Rev. 1
3Ch
HSV
Configuration (Standalone)
Use standalone configuration to operate the product without a DMX controller.
Static Mode
The Static mode allows for permanent dimmer, zoom, and strobe presets without a DMX controller.
Virtual Color Wheel
1. Go to the Virtual Color Wheel main level.
2. Select Virtual Color Wheel.
3. Select the desired gel color (see Virtual Color Wheel Chart).
4. Select the desired output level (<000–255>).
Color Temperature
1. Go to the Virtual Color Wheel main level.
2. Select Color Temperature.
3. Select the desired color temperature (see Preset Color Temperature Chart).
4. Select the desired output level (<000–255>).
Manual Color Mixer
1. Go to the Virtual Color Wheel main level.
2. Select Manual Color Mixer.
3. Select the color to edit (Red, Green, Blue, Amber, or Lime).
4. Select the desired output level for that color (<000–255>).
5. Repeat steps 3 and 4 until product outputs as desired.
Auto Programs
Auto programs allow for dynamic blinder effects without a DMX controller.
1. Go to the Auto Show main level
2. Select the desired auto program (Auto 1–5).
3. Select the desired speed (1–100)
Channel Function Value Percent/Setting
1 Dimmer 000 255 0-100%
2Virtual Color
Wheel 1 000 255 Refer to the Virtual Color Wheel Chart section for
specific values
3Color Temperature
1
000 255 Refer to the Preset Color Temperature Chart section for
specific values
Channel Function Value Percent/Setting
1Hue000 255 0-100%
2 Saturation 000 255 0-100%
3Value000 255 0-100%
The auto programs cannot be edited.

Page 15 of 20
Ovation F-55FC User Manual Rev. 1
Operation
Master/Slave
The Master/Slave mode allows a group of Ovation F-55FC products (the slaves) to simultaneously
duplicate the output of another Ovation F-55FC (the master) without a DMX controller.
To set each of the slaves:
1. Go to the Master/Slave main level
2. Select Slave.
To set the master:
1. Go to the Master/Slave main level
2. Select Master.
3. Select a static setting.
Dimmer Profiles
This setting determines how fast the output of the Ovation F-55FC changes when you modify the output value.
This setting provides four different options to simulate the dimming curve of an incandescent lighting product.
1. Go to the Dimmer Mode main level.
2. Select a dimmer curve (Off, Dimmer 1, Dimmer 2, or Dimmer 3).
White Balance
This setting determines the maximum output values for each color, which affects the appearance of a full
output white.
1. Go to the White Balance main level.
2. Select Off (the product will use a default setting) or Manual.
3. For Manual mode, select the color value to edit (Red, Green, Blue, Amber, or Lime).
4. Set the maximum value for the selected color (125–255).
5. Repeat steps 3 and 4 until the product outputs as desired.
LED Frequency
This option changes the Pulse Width Modulation (PWM) frequency of the LEDs on the Ovation F-55FC.
1. Go to the LED Frequency main level.
2. Select PWM Frequency (600Hz, 1200Hz,2000Hz,4000Hz, 6000Hz, or 25Khz).
Back Light
This setting allows for selection of the amount of time the backlight on the Ovation F-55FC’s display stays
on after the last button is pressed on the control panel.
1. Go to the Back Light main level.
2. Select On (remains on), 10S (10 seconds), 20S (20 seconds), or 30S (seconds).
System Information
This option displays the total number of hours the product has run, the installed software version, and the
product’s UID.
1. Go to the Information main level.
2. Select Fixture Hours, Version, or UID.
Factory Reset
This option restores the Ovation F-55FC to factory default settings.
1. Go to the Reset Factory main level.
2. Select No or Yes.
• The master is the one that runs a program whether inAuto or Static mode.
• Do not connect a DMX controller to the products configured for Master/Slave operation.
The DMX controller may interfere with signals from the master.
• The master should be the first product in the daisy chain.
Off: The output is proportional (linear) to the dimmer channel value.
Dimmer 1-3: The output follows the dimmer value based on the corresponding dimmer
curve, DIM1 being the fastest.

Page 16 of 20
Technical Information
Ovation F-55FC User Manual Rev. 1
5. Technical Information
Product Maintenance
To maintain optimum performance and minimize wear, clean this product frequently. Usage and
environment are contributing factors in determining the cleaning frequency.
Clean this product at least twice a month. Dust build-up reduces light output performance and can cause
overheating. This can lead to reduced light source life and increased mechanical wear.
To clean the product:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external
vents.
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl
alcohol.
5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6. Softly drag any dirt or grime to the outside of the transparent surface.
7. Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.
Do not spin the cooling fan using compressed air because you could damage it.