Chauvet Professional ROGUE R2X SPOT User manual

USER MANUAL

Rogue R2X Wash User Manual Rev. 2
Edition Notes
The Rogue R2X Wash User Manual includes a description, safety precautions, installation, programming,
operation and maintenance instructions for the Rogue R2X Wash as of the release date of this edition.
Trademarks
CHAUVET, the Chauvet logo and Rogue R2X Wash are registered trademarks or trademarks of Chauvet
& Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other
company and product names and logos referred to herein may be trademarks of their respective
companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited to, all design, text and images
are owned by Chauvet.
© Copyright 2020 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information purposes
only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this
manual or its content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4
paper (210 x 297 mm), configure the printer to scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should completely read through the guide
that shipped with the product, as well as this manual, before installing, operating, or maintaining this
product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetprofessional.com.
Document Revision
This Rogue R2X Wash User Manual is the 2nd edition of this document. Go to
www.chauvetprofessional.com for the latest version.

Table of Contents
Rogue R2X Wash User Manual Rev. 2
i
TABLE OF CONTENTS
1. Before You Begin ....................................................................... 1
What Is Included.................................................................................. 1
Claims.................................................................................................. 1
Text Conventions................................................................................. 1
Symbols............................................................................................... 1
FCC Compliance ................................................................................. 1
Safety Notes ........................................................................................ 2
Personal Safety ....................................................................................... 2
Mounting and Rigging.............................................................................. 2
Power and Wiring .................................................................................... 2
Operation ................................................................................................. 2
Expected LED Lifespan ....................................................................... 2
2. Introduction ................................................................................ 3
Description........................................................................................... 3
Features .............................................................................................. 3
Product Overview ................................................................................ 3
Product Dimensions ............................................................................ 4
3. Setup ........................................................................................... 5
AC Power ............................................................................................ 5
AC Plug.................................................................................................... 5
Power Linking .......................................................................................... 5
Fuse Replacement................................................................................... 5
Remote Device Management (RDM) .................................................. 5
Mounting.............................................................................................. 6
Orientation ............................................................................................... 6
Rigging..................................................................................................... 6
Procedure ................................................................................................ 6
4. Operation .................................................................................... 7
Control Panel Description.................................................................... 7
Control Options.................................................................................... 7
Programming ....................................................................................... 7
Menu Map............................................................................................ 7
Configuration (DMX)............................................................................ 11
Control Personalities................................................................................ 11
Starting Address ...................................................................................... 11
Control Channel Assignments and Values .......................................... 11
Control Channel Assignments and Values .......................................... 12
Color Chart .............................................................................................. 12
DMX Values............................................................................................. 13
56CH............................................................................................................................... 13
54CH............................................................................................................................... 19
54CH MS ........................................................................................................................ 25
33CH............................................................................................................................... 30
33CH MS ........................................................................................................................ 36
22CH............................................................................................................................... 41
17CH............................................................................................................................... 46
15CH............................................................................................................................... 51
Configuration (Settings)....................................................................... 54

Rogue R2X Wash User Manual Rev. 2
Table of Contents
ii
Pan Reverse ............................................................................................ 54
Tilt Reverse.............................................................................................. 54
Pan Angle ................................................................................................ 54
Tilt Angle.................................................................................................. 54
Fan Mode................................................................................................. 54
Display Backlight ..................................................................................... 54
Screen Reverse....................................................................................... 54
Dimmer Curve.......................................................................................... 54
Dimmer Speed......................................................................................... 54
Pulse-Width Modulation Options ............................................................. 54
LED Power (Legacy Mode)...................................................................... 55
Color Calibration ...................................................................................... 55
White Mode.............................................................................................. 55
Reset Function......................................................................................... 55
Factory Reset .......................................................................................... 55
Test Mode............................................................................................ 55
Auto Test ................................................................................................. 55
Manual Test............................................................................................. 55
System Information.............................................................................. 56
Offset Mode (Zero Adjust) ................................................................... 56
5. Maintenance................................................................................ 57
Product Maintenance........................................................................... 57
6. Technical Specifications ........................................................... 58
Returns............................................................................................ 59
Contact Us ...................................................................................... 60

Page 1 of 60
Before You Begin
Rogue R2X Wash User Manual Rev. 2
1. Before You Begin
What Is Included
Claims
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Text Conventions
Symbols
FCC Compliance
This device complies with Part 15 Part B of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
• Rogue R2X Wash
•Neutrik
®powerCON®Power Cord
• Omega Bracket with Mounting Hardware
• Quick Reference Guide
Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
Settings A menu option not to be modified
<ENTER> A key to be pressed on the product’s control panel
Symbol Meaning
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function
correctly if this information is not used.
Useful information.
Any reference to data or power connections in this manual assumes the use of Seetronic
IP rated cables.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data
transmission protocol.

Page 2 of 60
Rogue R2X Wash User Manual Rev. 2
Before You Begin
Safety Notes
Read all the following safety notes before working with this product. These notes contain important
information about the installation, usage, and maintenance of this product.
Personal Safety
• Avoid direct eye exposure to the light source while the product is on.
• Always disconnect the product from the power source before cleaning or replacing the fuse.
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Do not touch the product’s housing when operating because it may be very hot.
Mounting and Rigging
• This product is not intended for permanent installation.
• This product is for indoor use only! To prevent risk of fire or shock, do not expose this product to
rain or moisture. (IP20)
• CAUTION: When transferring product from extreme temperature environments, (e.g. cold truck to
warm humid ballroom) condensation may form on the internal electronics of the product. To avoid
causing a failure, allow product to fully acclimate to the surrounding environment before connecting
it to power.
• Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent
surfaces.
• Make sure there are no flammable materials close to this product while it is operating.
• When hanging this product, always secure to a fastening device using a safety cable.
• Never carry the product by the power cord.
Power and Wiring
• Make sure the power cord is not crimped or damaged.
• Always make sure you are connecting this product to the proper voltage in accordance with the
specifications in this manual or on the product’s specification label.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
• Never connect this product to a dimmer pack or rheostat.
• Make sure to replace the fuse with another of the same type and rating.
• Never disconnect this product by pulling or tugging on the power cable.
Operation
• Do not operate this product if there is damage on the housing, lenses, or cables. Have the damaged
parts replaced by an authorized technician at once.
• Do not cover the ventilation slots when operating to avoid internal overheating.
• The maximum ambient temperature is 113 °F (45 °C). Do not operate the product at higher
temperatures.
• The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.
• The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower
temperatures.
• In the event of a serious operation problem, stop using this product immediately!
Expected LED Lifespan
Over time, use and heat will gradually reduce LED brightness. Clustered LEDs produce more heat than
single LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is
40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit
the overall intensity.
This product contains no user-serviceable parts. Any reference to servicing in this User
Manual will only apply to properly trained, certified technicians. Do not open the housing
or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.
If your Chauvet product requires service, contact Chauvet Technical Support.

Page 3 of 60
Introduction
Rogue R2X Wash User Manual Rev. 2
2. Introduction
Description
The Rogue R2X Wash features 19 RGBW 25 W quad-LEDs, with a unique “bubble” lens design for high-
quality color rendering and visual effects. The Rogue R2X Wash also features a 12° to 49° zoom angle,
fast and smooth pan and tilt movements, simple and complex DMX channel profiles, plus 3-pin and 5-pin
DMX connectors.
Features
• Fully featured RGBW LED yoke wash fixture with zoom
• 16-bit dimming of master dimmer as well as individual colors for smooth control of fades
• 19 RGBW LEDs, 25 W each
• 3- and 5-pin DMX input/output connections
• Unique lens design for excellent color blending
• Fast, smooth pan and tilt movement
• RDM enabled for remote addressing and trouble shooting
• Selectable LED maximum output to match legacy Rogue R2 Washes
• Selectable PWM settings for camera operation
• 6 distinct dimming modes for advanced control
• Omega mounting bracket, fits all Rogue and Maverick fixtures
• Easy to read OLED display with simple, effective menu options
• Simple and complex DMX channel profiles for programming versatility
Product Overview
Menu
Buttons
OLED
Display
DMX
In/Out
Carry
Handle Power
In/Out
Fuse
Holder

Page 4 of 60
Rogue R2X Wash User Manual Rev. 2
Introduction
Product Dimensions
12.05 in
306 mm
15.67 in
398 mm
11.26 in
286 mm
3.77 in
96 mm
10.39 in
264 mm
8.58 in
218 mm
5.66 in
144 mm
6.79 in
172 mm

Page 5 of 60
Setup
Rogue R2X Wash User Manual Rev. 2
3. Setup
AC Power
The Rogue R2X Wash has an auto-ranging power supply and it can work with an input voltage range of
100 to 240 VAC, 50/60 Hz.
To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current
value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.
The listed current rating indicates the product’s average current draw under normal conditions.
AC Plug
The Rogue R2X Wash comes with a power input cord terminated with a Seetronic Powerkon A connector
on one end and an Edison plug on the other end (U.S. market). If the power input cord that came with your
product has no plug, or if you need the change the plug, use the table below to wire the new plug.
Power Linking
The product supports power linking. You can power link up to4 products at 120 V; up to 8 at 208 V; or up to
9 at 230 V.
This product comes with a power input cord. Power linking cables are available from Chauvet for
purchase.
Fuse Replacement
1. Disconnect this product from the power outlet.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with another fuse of the same type and rating (F 20 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.
Remote Device Management (RDM)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate
bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the
manufacturer as not all DMX controllers have this capability. The Rogue R2X Wash supports RDM
protocol that allows feedback to make changes to menu map options.
• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure
the product has an appropriate electrical ground to avoid the risk of electrocution or
fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green

Page 6 of 60
Rogue R2X Wash User Manual Rev. 2
Setup
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
For our CHAUVET Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position, making sure there is adequate room for ventilation,
configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
• Before deciding on a location for the product, make sure there is easy access to the product for
maintenance and programming purposes.
• Make sure that the structure onto which you are mounting the product can support the product’s
weight. See the Technical Specifications for weight information.
• When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
Procedure
The Rogue R2X Wash comes with a bracket to which you can attach a mounting clamp directly. Mounting
clamps are sold separately. Make sure the clamps are capable of supporting the weight of this product.
Use at least two mounting points per product. For the CHAUVET Professional line of mounting clamps, go
to http://www.trusst.com/products.
Mounting Diagram
Safety Cable
Mounting Clamp
Omega
Bracket
Overhead Mounting Floor Mounting

Page 7 of 60
Operation
Rogue R2X Wash User Manual Rev. 2
4. Operation
Control Panel Description
Control Options
Set the Rogue R2X Wash starting address in the 001–512 DMX range.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main level and a
variable number of programming levels for each option.
• To go to the desired main level, press <MENU> repeatedly until the option shows on the display.
Press <ENTER> to select. This will take you to the first programming level for that option.
• To select an option or value within the current programming level, press <UP> or <DOWN> until the
option shows on the display. Press <ENTER> to select. In this case, if there is another programming
level, you will see that first option, or you will see the selected value.
• Press <MENU> repeatedly to exit to the previous main level.
Menu Map
Button Function
<MENU> Exits from the current menu or function
<UP> Enables the currently displayed menu or sets the currently selected value in to the current
function
<DOWN> Navigates upward through the menu list or increases the numeric value when in a function
<ENTER>
Navigates downward through the menu list or decreases the numeric value when in a function
Main Level Programming Levels Description
Address 001–512 Sets the starting address
Run Mode DMX
15CH
Selects the DMX personality
17CH
22CH
33CH
33CH MS
54CH
54CH MS
56CH
Auto Test Auto test all functions

Page 8 of 60
Rogue R2X Wash User Manual Rev. 2
Operation
Run Mode
(cont.) Manual Test
Pan
000–255
Manually control and test all
settings through the control
panel
Tilt
Dimmer
Shutter
Red 1
Green 1
Blue 1
White 1
Red 2
Green 2
Blue 2
White 2
Red 3
Green 3
Blue 3
White 3
Red 4
Green 4
Blue 4
White 4
Red 5
Green 5
Blue 5
White 5
Zoom
Main Level Programming Levels Description

Page 9 of 60
Operation
Rogue R2X Wash User Manual Rev. 2
Setup
Pan Reverse OFF Normal pan
ON Reversed pan
Tilt Reverse OFF Normal tilt
ON Reversed tilt
Pan Angle
540 540° pan range
360 360° pan range
180 180° pan range
Tilt Angle
230 230° tilt range
180 180° tilt range
90 90° tilt range
Fans
Auto Fan speed according to
product temperature
ECO Quiet mode
Full Fan speed set on high
Display OFF Display turns off
ON Display stays on
Screen Rev OFF Normal display
ON Inverted display
Dimmer
Curve
Linear
Set the dimmer curve
Square
I Squa
SCurve
Dimmer
Speed
Smooth Smooth dimmer speed
Fast Fast dimmer speed
Main Level Programming Levels Description

Page 10 of 60
Rogue R2X Wash User Manual Rev. 2
Operation
Setup (cont.)
PWM Option
600Hz
Sets the PWM frequency
1200Hz
2000Hz
4000Hz
6000Hz
15000Hz
LED R POWER 050–100
Adjusts LED power levels for
matching to legacy Rogue
Wash products
LED G POWER 050–100
LED B POWER 050–100
LED W POWER 050–100
Color
Calibration
On
Uses factory default white setting
Off Uses maximum output values
Custom
RED
100–255
Sets red LED maximum value
GREEN
Sets green LED maximum value
BLUE Sets blue LED maximum value
White Mode
On Calibrates white to 7500K
Off Uses maximum output values
Custom
RED
000–255
Sets red LED maximum value
GREEN
Sets green LED maximum value
BLUE Sets blue LED maximum value
WHITE
Sets white LED maximum value
Reset
Function
Pan/Tilt NO
Reset individual functions or all
functions from start-up
YES
Zoom NO
YES
All NO
YES
Factory Set
Reset to factory default settings
Sys Info System
Information
Ver V_ Shows firmware version
Running Mode _ _ _ Shows current running mode
DMX Address _ _ _ Shows current starting address
Temperature _ _ _
Shows current product
temperature in °C
Fixture Time _ _ _ _ _ Shows number of hours
product has been powered on
UID:
_ _ _ _ _ _ _ _ _ Shows product UID
Main Level Programming Levels Description

Page 11 of 60
Operation
Rogue R2X Wash User Manual Rev. 2
Configuration (DMX)
Use control configurations to operate the product with a DMX controller.
Control Personalities
To set the control personality:
1. Go to the Run Mode main level.
2. Select the DMX option.
3. Select the desired personality, from 15CH, 17CH, 22CH, 33CH,33CH MS, 54CH, 54CH MS, or
56CH.
Starting Address
Each product will respond to a unique starting address from the controller. All products with the same
starting address will respond in unison. To set the starting address:
1. Go to the Address main level.
2. Select the starting address (001–512).
Control Channel Assignments and Values
Rogue R2X Wash Zones for DMX Control
• See the Starting Address section for the highest starting address you can select for each
personality.
• Make sure that the starting addresses on the various products do not overlap due to the new
personality setting.
11
1
1
1
1
55
5
5
5
5
4
4
4
2
2
2
3

Page 12 of 60
Rogue R2X Wash User Manual Rev. 2
Operation
Control Channel Assignments and Values
Color Chart
DMX Value Percent/Setting Red Value Green Value Blue Value White Value
000 004 No function 000 000 000 000
005 009 Color 1 000 000 000 255
010 014 Color 2 255 235 052 000
015 019 Color 3 214 134 048 000
020 024 Color 4 255 000 044 000
025 029 Color 5 255 059 113 000
030 034 Color 6 255 138 219 000
035 039 Color 7 226 175 226 000
040 044 Color 8 040 001 255 000
045 049 Color 9 000 000 255 000
050 054 Color 10 000 078 255 000
055 059 Color 11 000 199 255 000
060 064 Color 12 000 255 234 000
065 069 Color 13 149 246 255 000
070 074 Color 14 137 255 227 000
075 079 Color 15 213 220 222 000
080 084 Color 16 219 232 175 000
085 089 Color 17 205 255 199 000
090 094 Color 18 115 255 165 000
095 099 Color 19 006 255 143 000
100 104 Color 20 000 255 094 000
105 109 Color 21 029 255 000 000
110 114 Color 22 032 223 000 000
115 119 Color 23 075 255 000 000
120 124 Color 24 080 232 000 000
125 129 Color 25 108 226 000 000
130 134 Color 26 145 194 000 000
135 139 Color 27 210 255 000 000
140 144 Color 28 225 232 000 000
145 149 Color 29 023 215 000 000
150 154 Color 30 247 214 000 000
155 159 Color 31 255 163 000 000
160 164 Color 32 255 152 000 000
165 169 Color 33 255 108 000 000
170 174 Color 34 255 255 255 255
175 179 No function 000 000 000 000
180 201 Color scroll, fast to slow Various Various Various Various
202 207 Hold Various Various Various Various
208 229 Reverse color scroll, fast to slow Various Various Various Various
230 234 No function 000 000 000 000
235 249 Color snap, fast to slow Various Various Various Various
250 255 No function 000 000 000 000

Page 13 of 60
Operation
Rogue R2X Wash User Manual Rev. 2
DMX Values
56CH
Channel Function Value Percent/Setting
1Pan 000 255 0–100%
2FinePan 000 255 Fine control (16-bit)
3Tilt 000 255 0–100%
4 Fine Tilt 000 255 Fine control (16-bit)
5 Pan/Tilt Speed 000 255 Fast to slow
6 Dimmer 000 255 0–100%
7 Fine Dimmer 000 255 Fine control (16-bit)
8Strobe
000 019 Off
020 024 On
025 064 Strobe, fast to slow
065 069 On
070 084 Fast on, slow off (fast to slow)
085 089 On
090 104 Slow on, fast off (fast to slow)
105 109 On
110 124 Random strobe, fast to slow
125 129 On
130 144 Random fast on, slow off (fast to slow)
145 149 On
150 164 Random slow on, fast off (fast to slow)
165 169 On
170 184 Pulse strobe, fast to slow
184 189 On
190 204 Random pulse strobe, fast to slow
205 209 On
210 224 Slow on, slow off (fast to slow)
225 229 On
230 244 Pulse strobe, fast to slow
245 255 On
9Red1 000 255 0–100%
10 Fine Red 1 000 255 Fine control (16-bit)
11 Green 1 000 255 0–100%
12 Fine Green 1 000 255 Fine control (16-bit)
13 Blue 1 000 255 0–100%
14 Fine Blue 1 000 255 Fine control (16-bit)
15 White 1 000 255 0–100%
16 Fine White 1 000 255 Fine control (16-bit)
17 Red 2 000 255 0–100%
18 Fine Red 2 000 255 Fine control (16-bit)
19 Green 2 000 255 0–100%
20 Fine Green 2 000 255 Fine control (16-bit)
21 Blue 2 000 255 0–100%
22 Fine Blue 2 000 255 Fine control (16-bit)
23 White 2 000 255 0–100%
24 Fine White 2 000 255 Fine control (16-bit)
25 Red 3 000 255 0–100%
26 Fine Red 3 000 255 Fine control (16-bit)
27 Green 3 000 255 0–100%
28 Fine Green 3 000 255 Fine control (16-bit)

Page 14 of 60
Rogue R2X Wash User Manual Rev. 2
Operation
29 Blue 3 000 255 0–100%
30 Fine Blue 3 000 255 Fine control (16-bit)
31 White 3 000 255 0–100%
32 Fine White 3 000 255 Fine control (16-bit)
33 Red 4 000 255 0–100%
34 Fine Red 4 000 255 Fine control (16-bit)
35 Green 4 000 255 0–100%
36 Fine Green 4 000 255 Fine control (16-bit)
37 Blue 4 000 255 0–100%
38 Fine Blue 4 000 255 Fine control (16-bit)
39 White 4 000 255 0–100%
40 Fine White 4 000 255 Fine control (16-bit)
41 Red 5 000 255 0–100%
42 Fine Red 5 000 255 Fine control (16-bit)
43 Green 5 000 255 0–100%
44 Fine Green 5 000 255 Fine control (16-bit)
45 Blue 5 000 255 0–100%
46 Fine Blue 5 000 255 Fine control (16-bit)
47 White 5 000 255 0–100%
48 Fine White 5 000 255 Fine control (16-bit)
Channel Function Value Percent/Setting

Page 15 of 60
Operation
Rogue R2X Wash User Manual Rev. 2
49 Color
000 004 No function
005 009 Color 1
010 014 Color 2
015 019 Color 3
020 024 Color 4
025 029 Color 5
030 034 Color 6
035 039 Color 7
040 044 Color 8
045 049 Color 9
050 054 Color 10
055 059 Color 11
060 064 Color 12
065 069 Color 13
070 074 Color 14
075 079 Color 15
080 084 Color 16
085 089 Color 17
090 094 Color 18
095 099 Color 19
100 104 Color 20
105 109 Color 21
110 114 Color 22
115 119 Color 23
120 124 Color 24
125 129 Color 25
130 134 Color 26
135 139 Color 27
140 144 Color 28
145 149 Color 29
150 154 Color 30
155 159 Color 31
160 164 Color 32
165 169 Color 33
170 174 Color 34
175 179 No function
180 201 Color scroll, fast to slow
202 207 Hold
208 229 Reverse color scroll, fast to slow
230 234 No function
235 249 Color snap, fast to slow
250 255 No function
Channel Function Value Percent/Setting

Page 16 of 60
Rogue R2X Wash User Manual Rev. 2
Operation
50 Zone Selection
000 007 Zone 1, 2, 3, 4, 5
008 015 Zone 2, 3, 4, 5
016 023 Zone 3, 4, 5
024 031 Zone 4, 5
032 039 Zone 5
040 047 No function
048 055 Zone 1
056 063 Zone 1, 2
064 071 Zone 1, 2, 3
072 079 Zone 1, 2, 3, 4
080 087 Zone 1, 2, 3, 4, 5
088 095 Zone 1
096 103 Zone 2
104 111 Zone 3
112 119 Zone 4
120 127 Zone 5
128 135 Zone 1, 2
136 143 Zone 2, 3
144 151 Zone 3, 4
152 159 Zone 4, 5
160 167 Zone 1, 5
168 175 Zone 1, 2, 3
176 183 Zone 2, 3, 4
184 191 Zone 3, 4, 5
192 199 Zone 1, 4, 5
200 207 Zone 1, 2, 5
208 215 Zone 1, 2, 3, 4
216 223 Zone 2, 3, 4, 5
224 231 Zone 1, 3, 4, 5
232 239 Zone 1, 2, 4, 5
240 247 Zone 1, 2, 3, 5
248 255 Zone 1, 2, 3, 4, 5
Channel Function Value Percent/Setting