Chauvet Professional OVATION REVE E-3 User manual

User Manual
Model ID: OVATIONREVEE3

Ovation Rêve E-3 User Manual Rev. 7
Edition Notes
The Ovation Rêve E-3 User Manual includes a description, safety precautions, installation, programming,
operation, and maintenance instructions for the Ovation Rêve E-3.
Trademarks
Chauvet, the Chauvet logo, Ovation, and Ovation Rêve E-3 are registered trademarks or trademarks of
Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries.
Other company and product names and logos referred to herein may be trademarks of their respective
companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited to, all designs, text, and images
are owned by Chauvet.
© Copyright 2023 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information purposes
only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this
manual or its content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4
paper (210 x 297 mm), configure the printer to scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should completely read through the guide
that shipped with the product, as well as this manual, before installing, operating, or maintaining this
product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetprofessional.com.
Document Revision
This is revision 7 of the Ovation Rêve E-3 User Manual. Go to www.chauvetprofessional.com for the latest
version.

Ovation Rêve E-3 User Manual Rev. 7
Table of Contents
i
TABLE OF CONTENTS
1. Before You Begin ....................................................................... 1
What Is Included ........................................................................................... 1
Claims ........................................................................................................... 1
Manual Conventions ..................................................................................... 1
Symbols ........................................................................................................ 1
Safety Notes.................................................................................................. 2
FCC Statement of Compliance ..................................................................... 3
RF Exposure Warning for North America and Australia................................ 3
Expected LED Lifespan................................................................................. 3
2. Introduction ................................................................................ 4
Features........................................................................................................ 4
Product Overview.......................................................................................... 5
Product Dimensions ...................................................................................... 6
3. Setup ........................................................................................... 7
AC Power...................................................................................................... 7
AC Plug .......................................................................................................................... 7
Power Linking................................................................................................................. 7
Fuse Replacement ......................................................................................................... 7
DMX Linking.................................................................................................. 8
DMX Personalities.......................................................................................................... 8
Remote Device Management......................................................................................... 8
Master/Slave Connectivity............................................................................. 8
USB Software Update ................................................................................... 9
Force Upload................................................................................................. 9
Mounting ....................................................................................................... 10
Orientation...................................................................................................................... 10
Rigging ........................................................................................................................... 10
Procedure....................................................................................................................... 10
Adjustable Yoke ............................................................................................ 11
Soft Focus Filter............................................................................................ 12
Lens Tubes ................................................................................................... 12
4. Operation .................................................................................... 13
Control Panel Operation................................................................................ 13
Control Options ............................................................................................. 13
Programming................................................................................................. 13
DMX Configuration........................................................................................ 13
DMX Personalities.......................................................................................................... 13
Starting Address............................................................................................................. 13
Menu Map ..................................................................................................... 14
Standalone Configuration.............................................................................. 17
Virtual Color Wheel ........................................................................................................ 17
Color Temperature ......................................................................................................... 17
Manual Color Mixer ........................................................................................................ 17
Color X-Fade Speed ...................................................................................................... 17
Auto Programs ............................................................................................................... 17
Red Shift ........................................................................................................................ 17
Master/Slave .................................................................................................................. 17

Table of Contents
Ovation Rêve E-3 User Manual Rev. 7
ii
Dimmer Curve ................................................................................................................ 18
Dimmer Profiles.............................................................................................................. 18
Color Calibration ............................................................................................................ 18
LED Frequency .............................................................................................................. 18
Fan Mode ....................................................................................................................... 18
Back Light ...................................................................................................................... 18
System Information ........................................................................................................ 18
Virtual Color Wheel ....................................................................................... 19
Virtual Color Wheel Chart .............................................................................................. 19
Color Temperature Chart ............................................................................................... 20
Color Temperature DMX Chart ...................................................................................... 20
DMX Values .................................................................................................. 21
18Ch / 14Ch1 / 14Ch2 / 12Ch........................................................................................ 21
8Ch / 6Ch / 5Ch / 1Ch.................................................................................................... 22
HSV................................................................................................................................ 22
5. Technical Information ................................................................ 23
Product Maintenance .................................................................................... 23
6. Technical Specifications ........................................................... 24
Contact Us ...................................................................................... 25
Warranty & Returns....................................................................................... 25

1
Ovation Rêve E-3 User Manual Rev. 7
Before You Begin
1. Before You Begin
What Is Included
Claims
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate customer’s claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Manual Conventions
Symbols
• Ovation Rêve E-3
• Seetronic Powerkon IP65 power cable
• Ovation metal gobo holder
• Soft focus filter
• Quick Reference Guide
Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
<SET> A button on the product’s control panel
Settings A product function or a menu option
Symbol Meaning
Electrical warning. Not following these instructions may cause electrical damage to
the product, accessories, or the user.
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function
correctly if this information is not used.
Useful information.
Any reference to data or power connections in this manual assumes the use of
Seetronic IP-rated cables.
The term “DMX” used throughout this manual refers to the USITT DMX512-A
digital data transmission protocol.
!
!

2
Before You Begin
Ovation Rêve E-3 User Manual Rev. 7
Safety Notes
Read all the following safety notes before working with this product. These notes contain important
information about the installation, usage, and maintenance of this product.
• The luminaire is intended for professional use only.
• The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than
10 ft (3 m) is not expected.
• If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord
or cord exclusively available from the manufacturer or its service agent.
• The light source contained in this luminaire shall only be replaced by the manufacturer or its service
agent or a similar qualified person.
• CAUTION:
• This product’s housing may be hot when operating. Mount this product in a location with adequate
ventilation, at least 20 in (50 cm) from adjacent surfaces.
• When transferring the product from extreme temperature environments, (e.g., cold truck to warm
humid ballroom) condensation may form on the internal electronics of the product. To avoid causing
a failure, allow the product to fully acclimate to the surrounding environment before connecting it to
power.
• Flashing light is known to trigger epileptic seizures. User must comply with local laws regarding
notification of strobe use.
• ALWAYS:
• Disconnect from power before cleaning the product or replacing the fuse.
• Replace the fuse with the same type and rating.
• Use a safety cable when mounting this product overhead.
• Connect this product to a grounded and protected circuit.
•DONOT:
• Open this product. It contains no user-serviceable parts.
• Look at the light source when the product is on.
• Leave any flammable material within 1.64 ft (50 cm) of this product while operating or connected to
power.
• Connect this product to a dimmer or rheostat.
• Operate this product if the housing, lenses, or cables appear damaged.
• Operate this product outdoors or in any location where dust, excessive heat, water, or humidity may
affect it (adhere to standards for the published IP rating).
• ONLY use the hanging/mounting bracket to carry this product.
• The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher
temperatures.
• The minimum startup temperature is -14°F (-10°C). Do not start the product at lower temperatures.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
• In the event of a serious operating problem, stop using immediately.
This product contains no user-serviceable parts. Any reference to servicing in
this User Manual will only apply to properly trained, certified technicians. Do not
open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this
product.
If a Chauvet product requires service, contact Chauvet Technical Support.
!

3
Ovation Rêve E-3 User Manual Rev. 7
Before You Begin
FCC Statement of Compliance
This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
RF Exposure Warning for North America and Australia
Warning! This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20 cm between
the radiator and the user. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Expected LED Lifespan
Over time, use and heat will gradually reduce LED brightness. Clustered LEDs produce more heat than
single LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is
40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit
the overall intensity.

4
INTRODUCTION
Ovation Rêve E-3 User Manual Rev. 7
2. Introduction
Description
Ovation Rêve E-3 is the brightest, multi-color LED ellipsoidal that also has the capability of producing
perfectly tunable whites. It’s a new kind of epic story-telling machine that fuses the best of both worlds into
one totally reimagined LED light source. Color Temperature presets ranging from 2800K to 8000K maintain
outstanding brightness and a high quality of light, with an emulated “red shift” for a tungsten feel. Ovation
Rêve E-3 also features several dimming curves, a virtually silent operation with fan-off modes, and a series
of technician-friendly features such as an innovative, adjustable yoke that makes mounting in low
clearance situations a breeze. The Ovation Rêve E-3 can seamlessly transition from captivating a wide
range of saturated colors in class-leading output to distinct whites with +/- green adjustments using one
fixture. No ifs or buts. Simply and categorically unrivaLED.
Features
• Operating modes:
• HSV: hue, saturation, value control, gobo rotator
• 1-channel: dimmer
• 5-channel: dimmer, virtual color wheel (VCW), color temperature, hue, gobo rotator
• 6-channel: red, green, blue, amber, mint (RGBAM) control, gobo rotator
• 8-channel: dimmer, RGBAM control, strobe, gobo rotator
• 12-channel: 16-bit dimmer, RGBAM control, strobe, VCW, color temperature, hue, gobo rotator
• 14-channel: dimmer, RGBAM control, strobe, VCW, color temperature, hue, auto programs,
auto speed, control, gobo rotator
• 14-channel: 16-bit dimmer, 16-bit RGBAM control, strobe, gobo rotator
• 18-channel: 16-bit RGBAM and dimmer, strobe, VCW, color temperature, hue, control, gobo rotator
• Full-spectrum LED ERS-style lighting fixture for theatre, film and production
• Linear color temperature presets from 2800 K to 8000 K with high CRI and CQS
• Virtual color wheel with color matched to popular gel colors
• +/- Green adjustment and emulated red-shift via DMX or on-board control
• RDM (Remote Device Management) for added flexibility
• Adjustable PWM (Pulse Width Modulation) to avoid flickering on camera
• Virtually silent operation for use in studio, film and theatre applications
• Ultra-smooth 16-bit dimming curves and speeds to complement any lighting scheme.
• Innovative adjustable yoke for mounting in low clearance areas
• Direct power/data connection and control options for the Ovation GR-1 gobo rotator
• USB port for fixture software updates

5
Ovation Rêve E-3 User Manual Rev. 7
INTRODUCTION
Product Overview
Control
panel
Fuse
Power in
Power out
Handle /
Mounting
bracket
Menu buttons
3- and 5-pin
DMX out
3- and 5-pin
DMX in
USB port
Framing shutters (x4)
Lens tube
(sold separately)
Bracket
adjustment
knobs (x2)
Beam focus
knobs (x2)
Safety loop

6
INTRODUCTION
Ovation Rêve E-3 User Manual Rev. 7
Product Dimensions
19.75 in
(501 mm)
26.83 in
(681 mm)
20.44 in
(519 mm)
10.71 in
(272 mm)
13.07 in
(332 mm)

7
Ovation Rêve E-3 User Manual Rev. 7
SETUP
3. Setup
AC Power
Each Ovation Rêve E-3 has an auto-ranging power supply that works with an input voltage range of 100 to
240 V~, 50/60 Hz. To determine the power requirements for each Ovation Rêve E-3, refer to the label
affixed to the product or to the Technical Specifications chart in this manual.
The listed current rating indicates the maximum current draw during normal operation. For more
information, download Sizing Circuit Breakers from the Chauvet website: www.chauvetprofessional.com.
AC Plug
The Ovation Rêve E-3 comes with a power input cord terminated with a Seetronic Powerkon IP65 connector
on one end and an Edison plug on the other end (U.S. market). If the power input cord that came with the
product has no plug, or if the plug needs to be changed, use the table below to wire the new plug.
Power Linking
It is possible to power link Ovation Rêve E-3 products. See the table below for the current draw at each voltage
and frequency:
Never exceed 12A on a single circuit. Power-linking cables can be purchased separately.
Fuse Replacement
1. Disconnect this product from the power outlet.
2. Using a Phillips-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with another fuse of the same type and rating (T 6.3 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.
• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure
the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
100 V, 60 Hz 120 V, 60 Hz 208 V, 60 Hz 230 V, 50 Hz 240 V, 60 Hz
Current Draw 3.68 A 3.04 A 1.76 A 1.59 A 1.52 A
Make sure to disconnect the product’s power cord before replacing a blown fuse.
Always replace the blown fuse with another of the same type and rating.
!
!

8
SETUP
Ovation Rêve E-3 User Manual Rev. 7
DMX Linking
The Ovation Rêve E-3 can be linked to a DMX controller using a 3- and 5-pin DMX connection. If using
other DMX-compatible products with this product, it is possible to control each individually with a single
DMX controller.
DMX Personalities
The Ovation Rêve E-3 uses a 3- and 5-pin DMX data connection for the 1Ch, 5Ch, 6Ch, 8Ch, 12Ch,
14Ch1, 14Ch2, 18Ch, and HSV DMX personalities.
• Refer to the Introduction for a brief description of each DMX personality.
• Refer to the Operation chapter to learn how to configure the Ovation Rêve E-3 to work in these
personalities.
•TheDMX Values section provides detailed information regarding the DMX personalities.
Remote Device Management
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate
bi-directionally along existing DMX cabling. Check with the manufacturer or the DMX controller’s User
Manual, as not all DMX controllers have this capability. The Ovation Rêve E-3 supports RDM protocol that
allows feedback to make changes to menu map options.
Master/Slave Connectivity
The Master/Slave mode allows an Ovation Rêve E-3 (the master) to control one or more Ovation Rêve E-3
products (the slaves) without a DMX controller. Once Ovation Rêve E-3 becomes the master when running
an auto or custom program, or in Static mode.
Each slave’s control panel must be configured to operate in Slave mode. During Master/Slave operation,
the slaves will operate in unison with the master.
For information about DMX standards, Master/Slave connectivity, or the DMX cables
needed to link this product to a DMX controller, download the DMX Primer from the
Chauvet website: www.chauvetprofessional.com.
DO NOT connect a DMX controller to products operating in Master/Slave mode. The
DMX controller signals may interfere with the signals from the master.
•TheOperation section of this manual provides detailed instructions on how to
configure the master and slaves.
• For more information about DMX standards or the DMX cables needed to link this
product to a DMX controller, download the DMX primer from the Chauvet website:
www.chauvetprofessional.com.

9
Ovation Rêve E-3 User Manual Rev. 7
SETUP
USB Software Update
The Ovation Rêve E-3 allows for software updates with a USB device using the built-in USB port. To
update the software using a USB flash drive, do the following:
Force Upload
A Force Upload is done whenever a software update fails due to accidental removal of the USB flash drive,
incorrect control protocol, or loss of power during a regular software update process.
To do a Force Upload, follow the instructions below:
1. Link the target fixture to the main fixture via a DMX 5-pin connection. Ensure that the target fixture
is turned off.
2. Turn on the main fixture and set its protocol to DMX512.
3. Plug the flash drive into the USB-C port of the main fixture.
4. Go to Upgrade Firmware on the menu map.
5. Choose between Multiple Fixture and Other Fixture Type. Press <ENTER>.
•Multiple Fixture: Both the target fixture and main fixture are from the same product line
(e.g., 2 Ovation Rêve E-3 fixtures).
•Other Fixture Type: The target fixture and main fixture are from different product series
(e.g., a Ovation Rêve E-3 as the target fixture and a Maverick Silens 2 Profile as the main fixture).
6. Select the file that needs to be uploaded. The message “Are you sure?” will appear on the
screen. Press <ENTER>. Turn on the target fixture within 1–2 seconds of pressing <ENTER>. The
display on the target fixture should remain off.
a. The main fixture will show the update progress (0–100%).
b.
The target fixture’s display will turn on, and a notification “ <UPDATE> ” will appear on the screen.
7. DO NOTturn off power or remove the USB flash drive. Oncethe software is done uploading, the
target fixture will automatically reboot.
8. Go tothe target fixture’s main menu and confirm that the firmware version has been updated.
9. Reboot the target fixture.
1. Power on the product, and plug the flash drive into the USB port.
2. Once the flash drive has been detected, the message “Upgrade Firmware” will be displayed.
Press <ENTER>. If a different message appears on the display,search for the updated software in
the main menu (Update Firmware) and select from Only This Unit, Multiple Fixture, or Other
Fixture Type. Alist of the updated software files will be displayed.
3. Select the file that needs to be uploaded. The message “Are you sure?” will be displayed. Press
<ENTER>.
If the selected fileis incorrect, the upgrade will fail, and the display will go back to the main
interface. Repeat steps 1–3 using the correct file.
4. If the selected file is correct, the upgrade will start. DO NOTturn off the power or disconnect the
USB during the process. USB update can take several minutes to complete.
5. When the update is completed, the fixture will automatically reboot.
6. Go to Fixture Information on the product’s menu map and confirm the firmware revision.
7. When the boot-up process is finished, restart the product.
• Place the .chl file in the root directory of the USB drive.
• The product's USB port supports up to 32GB capacity and only works with FAT32 file format.
The “Other Fixture Type” option can only be selected for connected products compatible
with the Upload 03 (the first 2 digits of the item code must be 03).
Turning off the power, removing the USB, or not setting the fixture to the correct protocol
during the update can cause partial or total firmware failure in the targeted fixture(s).
Please refer to Force Upload section to fix firmware failure issues.
• A Force Upload process requires a target fixture (the fixture that needs a Force Upload
and a main fixture (the fixture that controls the upload process).
• The Force Upload process can only be done one target fixture at a time .
The timing of when the target fixture’s display will turn on varies from fixture to fixture.

10
SETUP
Ovation Rêve E-3 User Manual Rev. 7
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
For Chauvet Professional line of mounting clamps, go to: http://trusst.com/products/.
Orientation
Always mount this product in a safe position, ensuring that there is adequate room for ventilation,
configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product:
• Before deciding on a location for the product, always make sure there is easy access to the product
for maintenance and programming.
• Make sure that the structure onto which the product is being mounted can support the product’s
weight (see the Technical Specifications for weight information).
• When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
• When power linking multiple products, mount the products close enough for power-linking cables to reach.
• The bracket adjustment knobs allow for directional adjustment when aiming the product to the desired
angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the knobs.
Procedure
The Ovation Rêve E-3 comes with a double-bracketed yoke that can be used as a floor stand or to which
mounting clamps can be attached for hanging. Mounting clamps must be purchased separately. Ensure that the
clamps can support the weight of this product. Use at least one mounting point per product where necessary.
Mounting Diagram
Safety cable
Mounting clamp
Overhead Mounting
Mounting bracket
* Lens tubes sold separately
Secure the safety cable using
the passageway on the top of
the product

11
Ovation Rêve E-3 User Manual Rev. 7
SETUP
Adjustable Yoke
The Ovation Rêve E-3 comes with an adjustable yoke for mounting in low-clearance areas. To modify the
height of the yoke, do the following:
1. Loosen the bracket adjustment knobs on both sides of the fixture.
2. On each side of the fixture, remove the two screws and loosen the bolt attaching the plate to the
mounting bracket.
3. Using the screw holes as guide, adjust the position of the mounting bracket to achieve the desired
height of the yoke.
4. Put the screws back in place, and tighten the bolts and the bracket adjustment knobs.
1
2
3

12
SETUP
Ovation Rêve E-3 User Manual Rev. 7
Soft Focus Filter
The version 2 of the Ovation Rêve E-3 comes with the soft focus filter already pre-installed in the shutter
barrel, in front of the shutter blades and is being held by four filter holders.
• To remove the soft focus filter, gently squeeze and slide the filter out from under the four filter holders.
• To replace the soft focus filter into the fixture, gently squeeze the filter and carefully slide it back
under the filter holders. Make sure to follow the orientation direction printed on the filter.
To keep the soft focus filter in good condition:
• Ensure that no fingerprints are left on the filter, as this may cause the filter to heat unevenly and
eventually warp.
• When inserting shutter blades into the light path, note that the heat is reflected back at the filter. The
deeper the blades are inserted, and the longer the fixture runs, the more heat gets reflected on to
the filter, causing it to warp and potentially adhere to the shutter blades.
Lens Tubes
The following lens tubes are available for purchase:
• 19°, 26°, 36°, and 50° with gel frame (6.25 in/159 mm accessories)
• 5° gel frame (14 in/356 mm)
• 10° gel frame (12 in/304 mm)
• 14°, 15–30° and 25°–50° zoom gel frame (7.5 in/191 mm accessories)
• If there is a protective film on the soft focus filter, it must be removed before use.
• The standard filter frame must be used together with the fixture.
Soft focus filter
Filter holder (x4)

13
Ovation Rêve E-3 User Manual Rev. 7
OPERATION
4. Operation
Control Panel Operation
Control Options
Set the Ovation Rêve E-3 starting address in the 001-512 DMX range. This enables control of up to 8
products in the 18-channel personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main level and a
variable number of programming levels for each option.
• To go to the desired main level, press <MENU> repeatedly until the option shows on the display.
Press <ENTER> to select. This will show the first programming level for that option.
• To select an option or value within the current programming level, press <UP> or <DOWN> until
the option shows on the display. Press <ENTER> to select. This will show either the first option if
there is another programming level, or the selected value.
• Press <MENU> repeatedly to exit to the previous main level.
DMX Configuration
Use DMX configurations to operate the product with a DMX controller.
DMX Personalities
This setting allows the user to choose a particular DMX personality.
1. Go to the DMX Channel main level.
2. Select the desired personality (1Ch, 5Ch, 6Ch, 8Ch, 12Ch, 14Ch1, 14Ch2, 18Ch, and HSV).
Starting Address
In this mode, each product will respond to a unique starting address from the DMX controller. All products
with the same starting address will respond in unison.
1. Go to the DMX Address main level.
2. Set the starting address (001–512).
The highest recommended starting address for each DMX mode is as follows:
Button Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently selected value in to the current
function
<UP> Navigates upward through the menu list or increases the numeric value when in a function
<DOWN>
Navigates downward through the menu list or decreases the numeric value when in a
function
• See the Starting Address section for the highest starting address suggested for each
personality.
• Make sure that the starting addresses on the various products do not overlap due to
the new personality setting.
DMX Personality DMX Address DMX Personality DMX Address
HSV 509 8Ch 505
1Ch 512 12Ch 501
5Ch 508 14Ch 499
6Ch 507 18Ch 495

14
OPERATION
Ovation Rêve E-3 User Manual Rev. 7
Menu Map
Refer to the Ovation Rêve E-3 product page on www.chauvetprofessional.com for the latest menu map.
Main Level Programming Levels Description
DMX
Address 001–512* Selects DMX address (*highest channel restricted to personality chosen)
DMX
Channel
1Ch
Virtual Color Wheel
1-channel: dimmer Color Temperature
Manual Color Mixer
5Ch
5-channel: dimmer, virtual color wheel
(VCW), color temperature, hue, gobo rotator
6Ch
6-channel: red, green, blue, amber, mint,
gobo rotator
8Ch 8-channel: dimmer, RGBAM, strobe,
gobo rotator
12Ch
12-channel: 16-bit dimmer, RGBAM,
strobe, VCW, color temperature, hue,
gobo rotator
14Ch1
14-channel: dimmer, RGBAM, strobe,
VCW, color temperature, hue, auto
programs, auto speed, control, gobo rotator
14Ch2
14-channel: 16-bit dimmer, 16-bit
RGBAM, strobe, gobo rotator
18Ch
18-channel: 16-bit RGBAM and dimmer,
strobe, VCW, color temperature, hue,
control, gobo rotator
HSV 4-channel: hue, saturation, value,
gobo rotator
Virtual
Color
Wheel
Virtual Color
Wheel
C3050 - Md Yellow
Dimmer
0–255
Virtual Color Wheel simulates the output
of each gel color. Refer to the Virtual
Color Wheel Chart for specific values.
C3040 - Lt Yellow
C3240 - Amb Yellow
C2340 - VLt Amber
C2040 - Lt Amber
C2050 - Md Amber
C2060 - Dk Amber
C1050 - Lt Red
C1080 - Md Red
C1020 - NC Pink
C1030 - Md Pink
C1630 - Dk Pink
C1250 - Md Red Amber
C1060 - Dk Red Amber
C1650 - Magenta
C6170 - Dk Magenta
C6020 - Lt Lavender
C5030 - Lt Blue
C5020 - VLt Blue
C5430 - Lt Blue 2
C5070 - Blue
C5050 - Md Blue
C5060 - Dk Blue
C5690 - Indigo
C5080 - VDk Blue
C5081 - VDk Blue 2
C4370 - Yel Green
C4070 - Green
C4550 - Turquoise
C4560 - Aqua
C4570 - Blue Green

15
Ovation Rêve E-3 User Manual Rev. 7
OPERATION
Virtual
Color
Wheel
Color
Temperature
2800K
Dimmer 0–255
Preset white color temperatures.
Emulates a tungsten lamp at the
specified color temperature. Refer to the
Color Temperature Chart for specific
values.
2900K
3000K
3100K
3200K
3300K
3400K
3500K
3600K
3700K
3800K
3900K
4000K
4100K
4200K
4300K
Hue -25–25
4400K
4500K
4600K
4700K
4800K
4900K
5000K
5100K
5200K
5300K
5400K
5500K
5600K
5700K
6000K
6500K
7000K
7500K
8000K
Manual
Color Mixer
Red
000–255 Combines red, green, blue, amber, and
mint to make a custom color (0–100%)
Green
Blue
Amber
Mint
Color X-
Fade Speed
Off
Turns off the fade transition between colors
X-Fade Speed 1 Creates fade transition between colors
when using colors in the Virtual Color
Wheel or Color Temperature chart, from
fast (X-Fade Speed 1) to slow (X-Fade
Speed 4)
X-Fade Speed 2
X-Fade Speed 3
X-Fade Speed 4
Auto Show Auto 1–5 1–100
Selects automatic programs and auto
program speed
Red Shift On Mimics halogen lamp dimming
Off
Gobo
Rotator 000–255 Controls the gobo rotator
Master/
Slave
Master
Receives DMX signal from the DMX
controller (master)
Slave Receives DMX signal from the master
unit
Main Level Programming Levels Description

16
OPERATION
Ovation Rêve E-3 User Manual Rev. 7
Dimmer
Curve
SCurve
Sets the dimmer curve
Linear
Square
Inverse Square
Dimmer
Mode
Off Linear dimmer
Dimmer 1–3
Dimming curves, from fast ( Dimmer 1 ) to
slow (
Dimmer 3 )
Color
Calibration
Off
Deactivates color calibration
User
Calibration
Red
125–255
Sets red LED maximum value
Green Sets green LED maximum value
Blue Sets blue LED maximum value
Amber Sets amber LED maximum value
Mint Sets mint LED maximum value
Factory Calibration Uses factory default white setting
LED
Frequency
600Hz
Sets the PWM output frequency
1200Hz
2000Hz
4000Hz
6000Hz
25KHz
Fan Mode
Auto Sets the fan to auto mode
On Sets the fan to always on
Off Sets the fan to always off
Silent Sets the fan to silent
Back Light
10S
Turns off display backlight after 10 seconds
of inactivity
30S
Turns off display backlight after 30 seconds
of inactivity
2Min
Turns off display backlight after 2 minutes
of inactivity
Always On Display backlight always on
Gobo
Power
On Enables/disables gobo power output
Off
Information
Fixture Hours _ _ _ _H
Shows total hours the product has been
powered on
LED Hours _ _ _ _H
Shows total hours the LED has been
powered on
Version V_._ Shows current firmware version
UID _ _ _ _ _ _ _ _ _ _ _ _ Shows product UID
Update
Firmware
Only This Unit _ _ _ _ _ _.CHL Selects an update file for this product, or
shows “No such file!”
...
Multiple Units
_ _ _ _ _ _.CHL
Selects an update file for this and
connected Ovation Rêve E-3 products, or
shows “
No such file! ”
...
Other Fixture Type
_ _ _ _ _ _.CHL Selects an update file for other
connected products, or shows “No such
file!”
...
Reset
Factory
No Resets settings to factory default
Yes
WARNING: When operating in Fan Mode: Off and Fan Mode: Silent, the fixture will
become hotter to the touch than when using other fan modes. Use proper protective
equipment to prevent burns. Keep a safe distance from flammable objects.
NOTICE: When operating in Fan Mode: Off and Fan Mode: Silent, output of the fixture
will be reduced and will not reach the same levels as when using other fan modes.
Main Level Programming Levels Description
!