Maverick MK2 Wash QRG EN
2
The Maverick MK2 Wash Quick Reference Guide (QRG) has basic product
information such as connection, mounting, menu options, and DMX values.
Download the User Manual from www.chauvetprofessional.com for more details.
The information and specifications contained in this QRG are subject to change
without notice.
WARRANTY
FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND
CONDITIONS PLEASE VISIT OUR WEBSITE.
For customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration.
Fo
r customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands,
Luxembourg, France, and Germany: www.chauvetlighting.eu/warranty-registration.
Chauvet warrants that this product shall be free from defects in material and
normal use, for the period specified in, and subject to the
exclusions and limitations set forth in the
full limited warranty on our website. This
warranty extends only to the original purchaser of the product and is
not transferable. To exercise rights under this warranty, you must provide proof of purchase in the
original sales receipt from an authorized dealer that shows the product name and
ARE NO OTHER EXPRESS OR IMPLIED
WARRANTIES. This warranty gives you specific legal
rights. You may also have other rights that vary from st
ate to state and country to country. This warranty is
valid
only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands,
Luxembourg, France, Germany,
and Mexico. For warranty terms in other countries, please
consult your local distributor.
•DO NOT open this product. It contains no user-serviceable parts.
•DO NOT look at the light source when the product is on.
•To eliminate unnecessary wear and improve its lifespan, during periods of non-
use completely
disconnect the product from power via breaker or by unplugging
it.
•CAUTION: When transferring product from extreme temperature
environments, (e.g., cold truck to warm humid ballroom) condensation may
form on the internal electronics of the product. To avoid causing a failure, allow
product to fully acclimate to the surrounding environment before connecting it
to power.
•CAUTION: This product’s housing may be hot when lights are operating.
•Mount this product in a location with adequate ventilation, at least
20 in (50 cm) from adjacent surfaces.
•DO NOT leave any flammable material within 50 cm of this product while
operating or connected to power.
•USE a safety cable when mounting this product overhead.
•DO NOT operate this product outdoors or in any location where dust, excessive
heat, water, or humidity may affect it. (IP20)
•DO NOT operate this product if the housing, lenses, or cables appear damaged.
•DO NOT connect this product to a dimmer or rheostat.
•ONLY connect this product to a grounded and protected circuit.
•ONLY use the mounting brackets or the handles to carry this product. Do not
carry by the moving head.
•In the event of a serious operating problem, stop using immediately.
•The maximum ambient temperature is 113 °F (45 °C). Do not operate this
product at higher temperatures.
Outside the U.S., U.K., Ireland, Mexico, or Benelux, contact your distributor to
request support or return a product. From
the U.S., UK, Ireland, Mexico, or
Benelux, use the information in Contact Us at the end of this QRG.
•Seetronic Powerkon power cord
•2 Omega brackets with mounting hardware
•Quick Reference Guide
