Chauvet Rogue R2 SPOT User manual

User Manual

Edition Notes
Rogue™ R2 Spot User Manual Rev. 2
Edition
Notes
The Rogue™ R2 Spot User Manual Rev. 2 covers the description, safety precautions,
installation, programming, operation, and maintenance of the Rogue™ R2 Spot. CHAUVET®
released this edition of the Rogue™ R2 Spot User Manual in June 2014.
Trademarks
CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or
Chauvet). The CHAUVET® logo in its entirety including the CHAUVET® name and the dotted
triangle, and all other trademarks in this manual pertaining to services, products, or marketing
statements (example: It’s Green Thinking™) are owned or licensed by CHAUVET®. Any other
product names, logos, brands, company names, and other trademarks featured or referred to
within this document are the property of their respective trademark holders.
Copyright Notice
CHAUVET® owns the content of this User Manual in its entirety, including but not limited to
pictures, logos, trademarks, and resources.
© Copyright 2014 CHAUVET®. All rights reserved.
Electronically published by CHAUVET® in the United States of America.
Manual Use
CHAUVET® authorizes its customers to download and print this manual for professional
information purposes only. CHAUVET® expressly prohibits the u
sage, copy, storage,
distribution, modification, or printing of this manual or its content for any other purpose without
written consent from CHAUVET®.
Document
Printing
For better results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If
using A4 paper (210 x 297 mm), configure your printer to scale the content accordingly.
Intended
Audience
Any person in charge of installing, operating, and/or maintaining this product should completely
read through the guide that shipped with the product, as well as this manual, before installing,
operating, or maintaining this product.
Disclaimer
CHAUVET® believes that the information contained in this manual is accurate in all respects.
However, CHAUVET® assumes no responsibility for any errors or omissions in this document.
CHAUVET® reserves the right to revise and make changes to the content of this document
without obligation that CHAUVET® notify any person or company of such revision or changes.
This does not in any way constitute a commitment by CHAUVET® to make such changes.
CHAUVET® may issue a revision of this manual or a new edition to incorporate such changes.
Document
Revision
The Rogue™ R2 Spot User Manual Rev. 2 supersedes all previous versions of this manual.
Discard any older versions of this manual and replace with this version. Go to
www.chauvetprofessional.com for the latest version.
Author Date Editor Date
D. Couppe
6/4/14
A. Leon
6/4/14

Table of Contents
Rogue™ R2 Spot User Manual Rev. 2 -i-
Table of Contents
1. Before You Begin......................................................................................................................................1
What Is Included...........................................................................................................................................................1
Claims..........................................................................................................................................................................................1
Manual Conventions ....................................................................................................................................................................1
Symbols.......................................................................................................................................................................................1
Product At A Glance .....................................................................................................................................................2
Safety Notes .................................................................................................................................................................2
Personal Safety............................................................................................................................................................................2
Mounting And Rigging..................................................................................................................................................................2
Power And Wiring ........................................................................................................................................................................2
Operation.....................................................................................................................................................................................2
2. Introduction...............................................................................................................................................3
Description....................................................................................................................................................................3
Features........................................................................................................................................................................3
Overview.......................................................................................................................................................................4
Dimensions...................................................................................................................................................................5
3. Setup..........................................................................................................................................................6
AC Power......................................................................................................................................................................6
AC Plug........................................................................................................................................................................................6
Fuse Replacement.......................................................................................................................................................................6
Power Linking ...............................................................................................................................................................6
DMX Linking..................................................................................................................................................................6
DMX Personalities........................................................................................................................................................................6
Gobo Wheel..................................................................................................................................................................7
Color Wheel..................................................................................................................................................................8
Mounting.......................................................................................................................................................................9
Orientation ...................................................................................................................................................................................9
Rigging.........................................................................................................................................................................................9
Procedure ....................................................................................................................................................................................9
4. Operation.................................................................................................................................................10
Control Panel Description...........................................................................................................................................10
Control Options..........................................................................................................................................................................10
Programming..............................................................................................................................................................................10
Menu Map...................................................................................................................................................................11
Menu Map (Cont.).......................................................................................................................................................12
Address.......................................................................................................................................................................13
Set the DMX Address................................................................................................................................................................13
Run Mode ...................................................................................................................................................................13
DMX Personality ........................................................................................................................................................................13
Auto Test....................................................................................................................................................................................13
Manual Test...............................................................................................................................................................................13
Setup...........................................................................................................................................................................14
Pan Reverse..............................................................................................................................................................................14
Tilt Reverse................................................................................................................................................................................14
Screen Reverse .........................................................................................................................................................................14
Pan Angle ..................................................................................................................................................................................14
Tilt Angle....................................................................................................................................................................................14
Pan and Tilt Movement BlackOut...............................................................................................................................................14
Color Movement BlackOut.........................................................................................................................................................14
Gobo Movement BlackOut.........................................................................................................................................................14
Reset Function...........................................................................................................................................................................15
Factory Reset Function..............................................................................................................................................................15
System Information.....................................................................................................................................................16

Table of Contents
-ii- Rogue™ R2 Spot User Manual Rev. 2
Offset Mode ................................................................................................................................................................16
Pan.............................................................................................................................................................................................16
Tilt..............................................................................................................................................................................................16
Gobo..........................................................................................................................................................................................16
Gobo Rotate...............................................................................................................................................................................16
Gobo 2.......................................................................................................................................................................................16
Color 1 .......................................................................................................................................................................................16
Color 2 .......................................................................................................................................................................................16
Prism..........................................................................................................................................................................................16
Focus .........................................................................................................................................................................................16
Iris..............................................................................................................................................................................................16
Frost...........................................................................................................................................................................................16
Dimmer ......................................................................................................................................................................................16
FO. Yellow Edge........................................................................................................................................................................16
DMX Values................................................................................................................................................................17
DMX Values (Cont.)....................................................................................................................................................18
DMX Values (Cont.)....................................................................................................................................................19
DMX Values (Cont.)....................................................................................................................................................20
DMX Values (Cont.)....................................................................................................................................................21
DMX Values (Cont.)....................................................................................................................................................22
5. Technical Information.............................................................................................................................23
Product Maintenance..................................................................................................................................................23
6. Technical Specifications.........................................................................................................................24
Returns .......................................................................................................................................................................25
Contact Us..................................................................................................................................................25

Before You Begin
Rogue™ R2 Spot User Manual Rev. 2 -1-
1. BEFORE YOU BEGIN
What Is
Included
•Rogue™ R2 Spot
•Neutrik® powerCON® power cord
•2 Omega brackets with mounting hardware
•Warranty Card
•Quick Reference Guide
Claims
Carefully unpack the product immediately and check the box to make sure all the parts are in
the package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from
shipping or show signs of mishandling, notify the carrier immediately, not CHAUVET®. Failure
to report damage to the carrier immediately may invalidate your claim. In addition, keep the box
and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or
concealed damage, file a claim with CHAUVET® within 7 days of delivery.
Manual
Conventions
Convention Meaning
1–512
A range of values in the text
50/60
A set of mutually exclusive values in the text
<SET>
A button on the product’s control panel
Settings
A product function or a menu option
MENU>Settings
A sequence of menu options
1–10
A range of menu values from which to choose in a menu
Yes/No
A set of two mutually exclusive menu options in a menu
ON
A unique value to be entered or selected in a menu
Symbols
Symbols
Meaning
Critical installation, configuration, or operation information. Failure to
comply with this information may cause the product not to work,
damage third-party equipment, or cause harm to the operator.
Important installation or configuration information. Failure to comply
with this information may keep the product from working.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data
transmission protocol.

Before You Begin
-2- Rogue™ R2 Spot User Manual Rev. 2
Product At A
Glance
Use on Dimmer
x
Auto Programs
x
Outdoor Use
x
Auto-Ranging Power
Supply
P
Sound-Activated
x
Replaceable Fuse
P
DMX
P
User-Serviceable
x
Master/Slave
x
Safety Notes
Read all the following Safety Notes before working with this product. These notes include
important information about the installation, usage, and maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in this
User Manual will only apply to properly trained CHAUVET® certified technicians. Do
not open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.
Personal Safety
•Avoid direct eye exposure to the light source while the product is on.
•Always disconnect this product from its power source before servicing.
•Always connect this product to a grounded circuit to avoid the risk of electrocution.
•Do not touch this product’s housing during operation because it may be very hot.
Mounting And
Rigging
•This product is for indoor use only! To prevent risk of fire or shock, do not expose this
product to rain or moisture. (IP20)
•Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
•This product weighs 46.6 lb (21.2 kg). Always ask for help when mounting this product to
avoid personal injuries or damage to the product.
•Make sure there are no flammable materials close to this product while it is operating.
•Always carry this product by the handles. Do not carry from the head.
•When hanging this product, always secure to a fastening device using a safety cable.
Power And
Wiring
•Always make sure you are connecting this product to the proper voltage in accordance
with the specifications in this manual or on the product’s specification label.
•Never connect this product to a dimmer pack or rheostat.
•Never disconnect this product by pulling or tugging on the power cable.
Operation
•Do not operate this product if you see damage to the housing, lenses, or cables. Have the
damaged parts replaced by an authorized technician at once.
•Do not cover the ventilation slots when operating to avoid internal overheating.
•Do not aim this product toward the Sun. The lenses could concentrate the solar energy
and cause internal overheating.
•The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at a
higher temperature.
•In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your CHAUVET® product may require service, contact
CHAUVET® Technical Support.

Introduction
Rogue™ R2 Spot User Manual Rev. 2 -3-
2. INTRODUCTION
Description
The Rogue™ R2 Spot is a compact, electronic, moving yoke product equipped with a 240-watt
LED. It includes 2 color wheels, each with 7 colors plus white
and 2 gobo wheels for gobo
morphing. It also includes a rotating 3-facet prism, remote focus, frost and iris.
Features
•Compact, moving yoke fixture with a prism and motorized focus
•Precision-designed optics for hard-edged effects
•Extremely quiet for operation in any situation
•Color wheel 1:
•7 colors + Open (white)
•Split/linear colors
•Rainbow color spin at variable speed
•Color wheel 2:
•7 colors + Open (white)
•Split/linear colors
•Rainbow color spin at variable speed
•Gobo wheel 1:
•7 slot-n-lock gobos + Open
•Indexed, rotating gobo wheel with gobo shake
•Interchangable
•Gobo wheel spin at variable speed
•Gobo wheel 2:
•8 gobos + Open
•Gobo wheel spin at variable speed
•Variable frost
•3-facet rotating prism
•DMX channels: 18 or 21
•Pan: 540°
•Tilt: 270°
•Reset over DMX
•Electronic power supply
•3- and 5-pin DMX input and output connectors

Introduction
-4- Rogue™ R2 Spot User Manual Rev. 2
Overview
Data In
Power Out
Front View
Rear View
Power
Switch
Fuse
Data
Out
Control Panel
Handle
Top View
Side View
DMX In
DMX
Out
Power In

Introduction
Rogue™ R2 Spot User Manual Rev. 2 -5-
Dimensions
9.45 in
240 mm
10.28 in
261 mm
14.09 in
358 mm
16.10 in
409 mm
13.50 in
343 mm
12.87 in
327 mm
12.13 in
308 mm
4.53 in
115 mm
19.25 in
489 mm

Setup
-6- Rogue™ R2 Spot User Manual Rev. 2
3. SETUP
AC Power
Each Rogue™ R2 Spot has an auto-ranging power supply that works with an input voltage
range of 100 to 240 VAC, 50/60 Hz. To determine the power requirements for each Rogue™ R2
Spot, refer to the label affixed to the product. You can also refer to the Technical Specifications
chart in this manual.
The listed current rating indicates the maximum current draw during normal operation. For more
information, you may download Sizing Circuit Breakers from the CHAUVET® website
:
www.chauvetlighting.com/download/pro.
Always connect this product to a protected circuit with an appropriate electrical ground
to avoid the risk of electrocution or fire.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The Rogue™ R2 Spot comes with a power input cord terminated with a Neutrik® powerCON®
A connector on one end and an Edison plug on the other end (U.S. market). If the power input
cord that came with your product has no plug, or if you need to change the Edison plug, use the
table below to wire the new plug.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live
Black
Brown
Yellow or Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Fuse
Replacement
1. Disconnect this product from the power outlet.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with a another fuse of the same type and rating
(F 7 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.
Make sure to disconnect the product’s power cord before replacing a blown fuse. Always
replace the blown fuse with another of the same type and rating.
Power Linking
The Rogue™ R2 Spot supports power linking. You can power link up to 5 products at 120 V; up
to 8 at 208 V; or up to 9 at 230 V.
This product comes
with a power input cord. Power linking cables are available from
CHAUVET® for purchase.
DMX Linking
You can link the Rogue™ R2 Spot to a DMX controller using a 3- or 5-pin DMX connection. If
using other DMX-compatible products with the Rogue™ R2 Spot, you
can control each
individually with a single DMX controller.
DMX
Personalities
The Rogue™ R2 Spot uses a 3- or 5-pin DMX data connection for the 18- and 21-channel DMX
personalities.
•Refer to the Introduction chapter for a brief description of each DMX personality.
•Refer to the Operation chapter to learn how to configure the Rogue™ R2 Spot to work in
these personalities.
•The DMX Values section provides you with detailed information regarding the DMX
personalities.
If you are not familiar with or need more information about DMX standards, Master/Slave
connectivity, or the DMX cables needed to link this product to a DMX controller,
download the D
MX Primer from the CHAUVET® website:
www.chauvetlighting.com/download/pro.

Setup
Rogue™ R2 Spot User Manual Rev. 2 -7-
Gobo Wheel
The Rogue™ R2 Spot includes two gobo wheels: 7 rotating gobos plus open on wheel 1 and 8
fixed gobos plus open on wheel 2
. The diagram shows the gobo number on the wheel, as
numbered in the DMX Values tables.
1
2
3
4
5
6
7
8
Open
1
2
3
4
5
6
7
Gobo Wheel 1
Gobo Wheel 2

Setup
-8- Rogue™ R2 Spot User Manual Rev. 2
Color Wheel
The Rogue™ R2 Spot includes 2 color wheels with 7 fixed colors plus open (white) in each
wheel, as indicated below. The diagram shows the color name on the wheel, as shown
in the
DMX Values tables.
Open
(White)
Open
(White)
1
2
3
4
1
2
3
4
5
7
6
5
6
7
Color Wheel 1
Color Wheel 2

Setup
Rogue™ R2 Spot User Manual Rev. 2 -9-
Mounting
Before mounting this product, read and follow the Safety Notes. For our CHAUVET® line of
mounting clamps, go to http://trusst.com/productcategory/base-plates-accessories-clamps/.
Orientation
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Rigging
CHAUVET® recommends using the following general guidelines when mounting this product.
•When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
•Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
•Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
•If hanging this product, make sure that the mounting location can support the product’s
weight. See the Technical Specifications for the weight-bearing requirements of this
product.
•When hanging this product, always secure to a fastening device using a safety cable (such
as CH-05 from CHAUVET®).
Procedure
The Rogue™ R2 Spot comes with a preinstalled mounting surface to which you will be able to
attach the 2 included omega brackets. Make sure the clamps (such as CLP-15 from
CHAUVET®) are capable of supporting the weight of this product. Use two mounting points per
product. In addition, use a safety cable to link the product to the structure.
Mounting Diagram
Floor Mounting
Overhead Mounting
Omega Brackets
Safety Cable
Mounting Clamp
Mounting
Surface

Operation
-10- Rogue™ R2 Spot User Manual Rev. 2
4. OPERATION
Control Panel
Description
Button
Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently
selected value in to the current function
<UP>
Navigates upward through the menu list or increases the numeric
value when in a function
<DOWN>
Navigates downward through the menu list or decreases the
numeric value when in a function
Control Options
You can set the Rogue™ R2 Spot starting address in the 001–512 DMX range. This
enables control of up to 24 products in the 21-channel 21CH personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main
level and a variable number of programming levels for each option.
•To enter programming mode, press any key on the control panel to wake the opening
screen. Press <MENU> until you see one of the main level options.
•To highlight a menu option or to change a setting, press <UP> or <DOWN>.
•To change menu levels as shown in the Menu Map, press <ENTER> or <MENU>.
This is equivalent to moving right and left of the Menu Map, respectively.
•To accept the current or new value, press <ENTER>.
•To return to the previous menu without making changes, press <MENU>.
•To exit programming mode, press <MENU> until you see one of the main level
options, the opening screen, or do not press any button for 30 seconds and the
screen will automatically revert to the opening screen.

Operation
Rogue™ R2 Spot User Manual Rev. 2 -11-
Menu Map
Main Level Programming Levels Description
Address
001–512
Sets the DMX starting address
Run Mode
DMX
18CH
Selects the DMX mode
21CH
Auto Test
Runs the product’s test sequence
Manual Test
Pan
000–255 Allows manual control of all settings from the
control panel
Pan Fine
Tilt
Tilt Fine
P/T Speed
Dimmer
Dimmer Fine
Shutter
Color
Color2
Gobo
Gobo Rot
Gobo2
Focus
Prism
R-Prism
Iris
Frost
P/T Macro
P/T
Ma.Speed
Special
Function

Operation
-12- Rogue™ R2 Spot User Manual Rev. 2
Menu Map (Cont.)
Main Level Programming Levels Description
Setup
Pan Reverse
YES
Reverse pan operation
NO
Normal pan operation
Tilt Reverse
YES
Reverse tilt operation
NO
Normal tilt operation
Screen Reverse
YES
Rotates control screen view 180°
NO
Normal control screen view
Pan Angle
540
Selects the 540° pan angle range
360
Selects the 360° pan angle range
180
Selects the 180° pan angle range
Tilt Angle
270
Selects the 270° tilt angle range
180
Selects the 180° tilt angle range
90
Selects the 90° tilt angle range
BL.O.P/T Move
YES
Defines the pan/tilt move-in-black delay
NO
BL.O.ColorMove
YES
Defines the color change move-in-black delay
NO
BL.O.GoboMove
YES
Defines the gobo change move-in-black delay
NO
Reset
Function
Pan/Tilt
YES
Resets pan/tilt functions to the home position
NO
Shutter/
Prism
YES
Resets all shutter/prism functions to the home
position
NO
Color
YES
Resets all color functions to the home position
NO
Gobo
YES
Resets all gobo functions to the home position
NO
Zoom/Frost/
Focus
YES
Resets the zoom, frost, and focus functions to
the home position
NO
All
YES
Resets all functions to the home position
NO
Factory Settings
YES
Reverts the product back to the original factory
settings
NO
Sys Info
Ver:
Displays the software version
Running Mode:
Displays the current running mode
Dmx Address:
Displays the current DMX address
Temperature:
Displays the product’s temperature in Celsius

Operation
Rogue™ R2 Spot User Manual Rev. 2 -13-
Address
This programming level sets the DMX starting address.
•
Starting from the Main Level screen, select Address, press <ENTER>.
Set the
DMX Address
In this mode, each product will respond to a unique starting address from the DMX
controller. All products with the same starting address will respond in unison.
This option
sets the products DMX address.
•Change the starting address (001–512), press <ENTER>.
Run Mode
This programming level sets the DMX personality and controls the different test modes.
•Starting from the Main Level screen, select Run Mode, press <ENTER>.
DMX Personality
This option selects which DMX Personality the product uses.
1. Highlight DMX, press <ENTER>.
2. Select the DMX personality 18CH or 21CH, press <ENTER>.
•See the DMX Values section for the highest starting address you can select for
each personality.
•Make sure that the starting addresses on the various products do not overlap
due to the new personality setting.
Auto Test
This option runs every attribute individually through 1 cycle.
•Highlight Auto Test, press <ENTER>.
The Auto Test will end after 1 full cycle. You can stop the test by pressing <MENU>
at any time.
Manual Test
This option allows you to run each attribute individually or as a group.
1. Highlight Manual Test, press <ENTER>.
2. Highlight the desired attribute listed on the control panel screen, press <ENTER>.
•Set the attribute value (000–255), press <ENTER>.
3. Repeat step 2 for the other attributes.
When exiting the Manual Test level, the values of all tested channels will go back
to zero.

Operation
-14- Rogue™ R2 Spot User Manual Rev. 2
Setup
This programming level controls the product’s head movement, lamp adjustments, and
maintenance timer.
•Starting from the Main Level screen, select Setup, press <ENTER>.
Pan Reverse
Reverses the operation of the pan attribute.
1. Highlight Pan Reverse, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Tilt Reverse
Reverses the operation of the tilt attribute.
1. Highlight Tilt Reverse, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Screen Reverse
To invert the control panel screen:
1. Highlight Screen Reverse, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Pan Angle
This option assigns pan range.
1. Highlight Pan Angle, press <ENTER>.
2. Select 540, 360, or 180, press <ENTER>.
Tilt Angle
This option assigns tilt range.
1. Highlight Tilt Angle, press <ENTER>.
2. Select 90, 180, or 270, press <ENTER>.
Pan and Tilt
Movement BlackOut
This option engages the shutter to block all light output whenever the product’s head is in
motion.
1. Highlight BL.O.P/T Move, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Color Movement
BlackOut
This option engages the shutter to block all light output whenever the product’s color
wheel is in motion.
1. Highlight BL.O.ColorMove, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Gobo Movement
BlackOut
This option engages the shutter to block all light output whenever the product’s gobo
wheel is in motion.
1. Highlight BL.O.GoboMove, press <ENTER>.
2. Select YES or NO, press <ENTER>.

Operation
Rogue™ R2 Spot User Manual Rev. 2 -15-
Reset Function
This programming level allows the user to reset individual functions to the home position.
•
Starting from the Setup screen level, select Reset Function, press <ENTER>.
Pan/Tilt Reset
This option resets the Pan/Tilt functions to the home position.
1. Highlight Pan/Tilt, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Prism Reset
This option resets the Prism functions to the home position.
1. Highlight Shutter/Prism, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Color/Frost Reset
This option resets the Color/Frost functions to the home position.
1. Highlight Color/Frost, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Gobo&R/Gobo2
Reset
This option resets the Gobo&R/Gobo 2 functions to the home position.
1. Highlight Gobo&R/Gobo2, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Focus/Iris
Reset
This option resets the Focus/Iris functions to the home position.
1. Highlight Focus/Iris, press <ENTER>.
2. Select YES or NO, press <ENTER>.
All Reset
This option resets the all the functions to the home position.
1. Highlight All, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Factory Reset
Function
This reverts the product back to its original factory settings.
1. Starting from the Setup screen level, select Factory Settings, press <ENTER>.
2. Select YES or NO, press <ENTER>.

Operation
-16- Rogue™ R2 Spot User Manual Rev. 2
System
Information
This programming level shows standard information regarding the product’s operating status.
•Starting from the Main Level screen, select Sys Info, press <ENTER>.
•Ver: The current software version is displayed on the screen.
•Running Mode: The current Running mode is displayed on the screen.
•DMX Address: The current DMX address is displayed on the screen.
•Temperature: The current product temperature is displayed on the screen.
Offset Mode
The Offset mode provides fine adjustments for the home position of all the moving parts in the
optical path as well as the pan and tilt movements. This way, when in their home position, the
moving parts do not show any border or reduce the light output.
1. Starting from the Main Level screen, Press and hold <MENU>until the password screen
appears.
2. Using <UP> to increase the number value and <DOWN> to move to the next column,
enter 2323, press <ENTER>. This brings you into the Zero Adjust menu screen.
Pan
1. Highlight PAN, press <ENTER>.
2. Select 000–255, press <ENTER>.
Tilt
1. Highlight TILT, press <ENTER>.
2. Select 000–255, press <ENTER>.
Gobo
1. Highlight GOBO, press <ENTER>.
2. Select 000–255, press <ENTER>.
Gobo Rotate
1. Highlight GOBO ROT, press <ENTER>.
2. Select 000–255, press <ENTER>.
Gobo 2
1. Highlight GOBO2, press <ENTER>.
2. Select 000–255, press <ENTER>.
Color 1
1. Highlight COLOR1, press <ENTER>.
2. Select 000–255, press <ENTER>.
Color 2
1. Highlight COLOR2, press <ENTER>.
2. Select 000–255, press <ENTER>.
Prism
1. Highlight PRISM, press <ENTER>.
2. Select 000–255, press <ENTER>.
Focus
1. Highlight FOCUS, press <ENTER>.
2. Select 000–255, press <ENTER>.
Iris
1. Highlight IRIS, press <ENTER>.
2. Select 000–255, press <ENTER>.
Frost
1. Highlight FROST, press <ENTER>.
2. Select 000–255, press <ENTER>.
Dimmer
1. Highlight DIMMER, press <ENTER>.
2. Select 000–255, press <ENTER>.
FO. Yellow Edge
Reserved for future use.