Chauvet Maverick MKII Spot User manual

Maverick MKII Spot User Manual Rev. 4

Table of Contents
Maverick MKII Spot User Manual Rev. 4 -i-
Table of Contents
1. Before You Begin...................................................................................................................................................1
What Is Included................................................................................................................................................................. 1
Claims........................................................................................................................................................................................... ..1
Manual Conventions ................................................................................................................................................................ ...... 1
Symbols............................................................................................................................................................................... ...... ....1
Product At A Glance .................................................................................................................................................. ........1
Safety Notes ................................................................................................................................................. ....... .............2
Personal Safety......................................................................................................................................................... .... ...................2
Mounting And Rigging.......................................................................................................................................... ... ........................2
Power And Wiring................................................................................................................................................ ..............................2
Operation................................................................................................................................................... .. .... ............................2
Expected LED Lifespan ................................................................................................................ ..... ...............................2
2. Introduction................................................................................................................ ..........................................3
Description........................................................................................................................... ... ........................................3
Features at a glance..............................................................................................................................................................3
Overview.................................................................................................................. . ..... ................................................3
Dimensions......................................................................................................... ... .. .... ......................................................4
3. Setup ....................................................................................................... . ...........................................................5
AC Power.................................................................................................. ...... . .............................................................5
AC Plug.......................................................................................................... ...... ... ........................................................................5
Fuse Replacement.................................................................................. .... ... ............................................................................5
Mounting....................................................................................... ... ..............................................................................6
Orientation ........................................................................................... ...... .......................................................................................6
Signal Connections............................................................... .... ..................................................................................7
Art-Net™ Connection................................................................. ....... ...............................................................................................7
sACN Connection ............................................................... .... ....................................................................................................7
4. Operation ............................................................... . ... .......................................................................................8
Touchscreen and Control Panel Description ....... ..... .....................................................................................................8
Menu Map........................................................ ...... .......................................................................................................8
Operating Settings Configuration................... ..... ..........................................................................................................12
Home Screen.............................................. ..... ..........................................................................................................................12
Network Setup .......................................... .. ...............................................................................................................................12
Personality......................................... .... .................................................................................................................................14
Settings.................................... ...... ....... ........................................................................................................................................14
Test Mode.................................. .... ..........................................................................................................................................18
System Information................ ..... ..................................................................................................................................................18
Offset Mode ........................ .............................................................................................................................................19
DMX Values................ .... ..........................................................................................................................................21
32CH.......................... . ... ................................................................................................................................................21
24CH.................. ...... ...................................................................................................................................................23
Gobo Designs... ..... ........................................................................................................................................................26
Color Wheel........... .............................................................................................................................................................26
Gobo Replacement..............................................................................................................................................................................27
5. Firmware Update..................................................................................................................................................28
6. Technical Information..........................................................................................................................................31
Prod ct Maintenance...........................................................................................................................................................31
Error dication.....................................................................................................................................................................31
7. Technical Specifications.....................................................................................................................................32
Re urns......................................................................................................................................................................33
Contact Us................................................................................................................................................................34
www.carlosmendoza.com.mx

Operation
-12- Maverick MK2 Spot User Manual Rev. 4
Operating Settings Configuration
Home Screen
The Maverick MK2 Spot has a home screen that shows the protocol mode, the IP address or DMX
address, the DMX personality, and the current product temperature.
To see the home screen, press
<MENU>repeatedly until it appears on the display.
Start Address
To set the starting address, set the Control Mode and then follow the instructions below:
Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.1. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Start Address, or touch th display2. where it says Start Address.
If using the buttons instead of the touchscreen, press <ENTER>.3. Enter the starting address (001–512) with one of the following methods4. •Type the address number using the number pad that shows on the ouchscreen display.
or
•Using the buttons (or the button icons on the sides of the disp ay)
Use <LEFT> or <RIGHT> to select the digit to be altered.a. Use <UP> or <DOWN> to increase or decrease the umber value of that digit.b. Repeat until the address is set as desired.c.
Press <ENTER>.
5.
Network Setup
The universe of the TCP/IP protocol will be the uni erse of the DMX function.
Ethernet To DMX
The Maverick MK2 Spot can convert a single et ernet input signal to a single DMX output signal.
To activate or deactivate the Ethernet to DMX function, do the following:
Press <MENU> repeatedly until the H me Screen shows on the display. Press <ENTER>.
1. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Network Setup, or touch the display2. where it says Network Setup.
If using the buttons instead of t e touchscreen, press <ENTER>.3. Use <UP> or <DOWN> to s lect Ethernet to DMX, or touch the display where it says Ethernet4. to DMX.
If using the buttons nst ad of the touchscreen, press <ENTER>.5. Use <UP>, <DOWN> <LEFT>, or <RIGHT> to select NO (deactivate) or YES (activate), or6. touch the disp ay w ere it says the desired setting.
Press <ENTER
7.
IP Mode
The IP address of the Maverick MK2 Spot can be set manually, by the network, or to a pre-set static
address spec fic to each product. To set the IP Mode, follow the instructions below:
Press MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
1. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Network Setup, or touch the display2. where it says Network Setup.
If using the buttons instead of the touchscreen, press <ENTER>.3. Use <UP> or <DOWN> to select IP Mode, or touch the display where it says IP Mode.4. If using the buttons instead of the touchscreen, press <ENTER>.5. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from:6. •Manual (set the IP address with the control panel),
•DHCP (the network sets the IP address),
or
•Static (a pre-set address specific to each product),
or touch the display where it says the desired mode.
Press <ENTER>.
7.
www.carlosmendoza.com.mx

Operation
Maverick MK2 Spot User Manual Rev. 4 -13-
Subnet and
Universe
The Subnet and universe must be assigned through the product menu. To set the Subnet and
Universe do the following:
Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
1. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Network Setup, or touch the display2. where it says Network Setup.
If using the buttons instead of the touchscreen, press <ENTER>.3. Use <UP> or <DOWN> to select Subnet and Universe, or touch the display where it says4. Subnet and Universe.
If using the buttons instead of the touchscreen, press <ENTER>.5. Enter the universe address (0–254 for ArtNet, 0–255 for sACN) with one of the ollowing6. methods:
•Type the universe number using the number pad that shows on the ou hscreen display.
or
•Using the buttons (or the button icons on the sides of the displ y),
Use <LEFT> or <RIGHT> to select the digit to be altered.a. Use <UP> or <DOWN> to increase or decrease the number value of that digit.b. Repeat until the universe or subnet is set as desired.c.
Press <ENTER>.
7.
ArtNet IP Address
To set the IP address, do the following:
Press <MENU> repeatedly until the Home Screen show n the display. Press <ENTER>.1. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to elec Network Setup, or touch the display2. where it says Network Setup.
If using the buttons instead of the touchscr en, ress <ENTER>.3. Use <UP> or <DOWN> to select ArtNetIP, r t uch the display where it says ArtNetIP.4. If using the buttons instead of the touchsc een, press <ENTER>.5. Set the IP address (from 000.000.000. 00 to 255.255.255.255) with one of the following6. methods:
•Through the touchscreen:
Touch the display wher it shows the byte (set of three numbers) to be changed.a. Use the number pad on the display to enter the desired number.b. Repeat until the I address is set as desired.c.
•With the button :
Use <LEFT> o <RIGHT> to select the byte (set of three numbers) to be changed).a. Use <UP> r <DOWN> to increase or decrease the value.b. Repeat til the IP address is set as desired.c.
Press <ENTER>.
7.
Subnet Mask
To set the Su net Mask, do the following:
Pr ss MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.1. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Network Setup, or touch the display2. where it says Network Setup.
If using the buttons instead of the touchscreen, press <ENTER>.3. Use <UP> or <DOWN> to select SubMask, or touch the display where it says SubMask.4. If using the buttons instead of the touchscreen, press <ENTER>.5. Set the Subnet Mask (from 000.000.000.000 to 255.255.255.255) with one of the following6. methods.
•Through the touchscreen:
Touch the display where it shows the byte (set of three numbers) to be changed.a. Use the number pad on the display to enter the desired number.b. Repeat until the Subnet Mask is set as desired.c.
•With the buttons:
Use <LEFT> or <RIGHT> to select the byte (set of three numbers) to be changed).a. Use <UP> or <DOWN> to increase or decrease the value.b. Repeat until the Subnet Mask is set as desired.c.
Press <ENTER>.
7.
In DHCP or Static IP Mode, the IP and SubMask menu settings have no effect on the product.
www.carlosmendoza.com.mx

Operation
-14- Maverick MK2 Spot User Manual Rev. 4
Personality
To set which DMX personality to use, do the following:
Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.1. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Personality, or touch the display where it2. says Personality.
If using the buttons instead of the touchscreen, press <ENTER>.3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select DMX 24CH or DMX 32CH, or touc the4. display where it says the desired option.
If using the buttons instead of the touchscreen, press <ENTER>.5. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (cancel) or YES
( nfirm) or touch the
6. display where it says the desired option.
Press <ENTER>.
7.
Settings
To reach the Settings menu, follow the instructions below:
Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.1. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Settings or touch the display where it2. says Settings.
If using the buttons instead of the touchscreen, press < NTER>.
3.
Control Mode
The Maverick MK2 Spot can be set to respond to DMX WDMX, Art-Net™ or sACN. The protocol
configuration must be set for the product to respo d correctly to the controller(s). See the Menu
Map for more information.
To configure the protocol for the Maverick MK2 Spo follow the instructions below:
Navigate to the Settings menu.
1. Use <UP> or <DOWN> to select Control Mode, or touch the display where it says Control2. Mode.
If using the buttons instead of th t u hscreen, press <ENTER>.3. Use <UP>, <DOWN>, <LEFT>, o RIGHT> to select DMX, WDMX, sACN,ArtNet., or touch4. the display where it says th desired option.
Press <ENTER>.
5.
For WDMX control, en ure the antenna is raised and there are no obstructions between the
controller and the product See WDMX Reset for troubleshooting information.
Pan/Tilt
Orientation
To set whether the pan or tilt orientation is normal or inverted:”
Navigate t the Se tings menu.1. Use <UP or <DOWN> to select Pan Reverse or Tilt Reverse, or touch the display where it2. says the desired setting.
If u ing the buttons instead of the touchscreen, press <ENTER>.3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (normal orientation) or YES (inverted4. orientation), or touch the display where it says the desired option.
Press <ENTER>.
5
Display
Orientation
To set which way the display faces, do the following:
Navigate to the Settings menu.1. Use <UP> or <DOWN> to select Screen Reverse, or touch the display where it says Screen2. Reverse.
If using the buttons instead of the touchscreen, press <ENTER>.3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (display is normal), YES (display is4. inverted), or AUTO (the display automatically detects which way the product is facing and
orients itself accordingly), or touch the display where it says the desired option.
Press <ENTER>.
5.
www.carlosmendoza.com.mx

Operation
Maverick MK2 Spot User Manual Rev. 4 -15-
Pan/Tilt Angle
Range
To set the range of motion the pan or tilt is permitted:
Navigate to the Settings menu.1. Use <UP> or <DOWN> to select Pan Angle or Tilt Angle
, or touch the display where it says the
2. desired setting.
If using the buttons instead of the touchscreen, press <ENTER>.3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select 540 (540°), 360 or 270 (360° or 270 for4. pan or tilt respectively), 180 (180°), or 90 (90°) or touch the display where it says the de ired
option.
Press <ENTER>.
5.
Blackout on
Pan/Tilt
Movement
To set whether the product will black out during pan or tilt movement, follow the instr ctions below:
Navigate to the Settings menu.1. Use <UP> or <DOWN> to select BL. O. P/T Move, or touch the display wh re it says
BL. O. P/T
2. Move.
If using the buttons instead of the touchscreen, press <ENTER>.3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not lack out) or YES (black out4. during movement), or touch the display where it says the desired option.
Press <ENTER>.
5.
Blackout on Color
Movement
To set whether the product will black out during color movement follow the instructions below:
Navigate to the Settings menu.1. Use <UP> or <DOWN> to select BL. O. Color Move, o t uch the display where it says BL. O.2. Color Move.
If using the buttons instead of the touchscree pr s <ENTER>.3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to elect NO (do not black out) or YES (black out4. during movement), or touch the display whe e it says the desired option.
Press <ENTER>.
5.
Blackout on Gobo
Movement
To set whether the product will black out du ing gobo movement, follow the instructions below:
Navigate to the Settings menu.1. Use <UP> or <DOWN> to select BL O. Gobo Move, or touch the display where it says BL. O.2. Gobo Move.
If using the buttons inst ad o the touchscreen, press <ENTER>.3. Use <UP>, <DOWN> <LEFT>, or <RIGHT> to select NO (do not black out) or YES (black out4. during movement), or to ch the display where it says the desired option.
Press <ENTER>
5.
Touchscreen
Calibration
If the touchsc een s no responding correctly, it may need to be calibrated. To do so:
Navigate to he Settings menu.1. Use <UP> or <DOWN> to select Calibration, or touch the display where it says Calibration.2. If using th buttons instead of the touchscreen, press <ENTER>.3. Use <U >, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not calibrate) or YES (calibrate),4. or touch the display where it says the desired option.
Pr ss <ENTER>.5
Follow the instructions, touching the points as they appear on the display.
6.
Touchscreen Lock
To lock or unlock the touchscreen control panel, do the following:
Navigate to the Settings menu.1. Use <UP> or <DOWN> to select Touchscreen Lock, or touch the display where it says2. Touchscreen Lock.
If using the buttons instead of the touchscreen, press <ENTER>.3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (display will respond to touch) or YES4. (display will not respond to touch), or touch the display on the desired option.
Press <ENTER>.
5.
www.carlosmendoza.com.mx

Operation
-16- Maverick MK2 Spot User Manual Rev. 4
Lock the Screen
To lock the touchscreen control panel and menu buttons, do the following:
Navigate to the Settings menu.1. Use <UP> or <DOWN> to select Lock Screen, or touch the display where it says Lock Screen.2. If using the buttons instead of the touchscreen, press <ENTER>.3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (display will respond to touch or4. buttons) or YES (display will not respond to touch or buttons), or touch the display where says
the desired option.
Press <ENTER>.5.
To unlock the touchscreen and menu buttons, do the following:
Touch the display touchscreen anywhere or push any menu button.1.
Enter the passcode (0920) using the touchscreen or buttons.
2.
Swap Pan and Tilt
To switch the pan and tilt functions so that what normally controls the pan con rols the tilt and what
normally controls the tilt controls the pan, follow the instructions below
Navigate to the Settings menu.
1. Use <UP> or <DOWN> to select Swap XY, or touch the display where it says Swap XY.2. If using the buttons instead of the touchscreen, press <ENTE >.3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (normal pan and tilt) or YES (pan4. controls tilt, tilt controls pan), or touch the display wh re it says the desired option.
Press <ENTER>.
5.
Pan/Tilt Speed
To set the maximum speed of the pan and tilt:
Navigate to the Settings menu.1. Use <UP> or <DOWN> to select XY Mode or uch the display where it says XY Mode.2. If using the buttons instead of the touchscr en press <ENTER>.3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Slow or Fast, or touch the display where4. it says the desired option.
Press <ENTER>.
5.
WDMX Reset
To reset the WDMX connection f om he Maverick MK2 Spot, do the following:
Navigate to the Settings menu1. Use <UP> or <DOWN> to s lect WDMX Reset, or touch the display where it says WDMX2. Reset.
If using the buttons inst ad of the touchscreen, press <ENTER>.3. Use <UP>, <DOWN> <LEFT>, or <RIGHT> to select NO (do not reset connection) or YES4. (reset the connect n), or touch the display where it says the desired option.
Press <EN ER>.
5.
Backlight Timer
To set the mount of time after inactivity before the display backlight turns off:
Navigate o the Settings menu.1. Use <UP> or <DOWN> to select Backlight Timer, or touch the display where it says Backlight2. Tim r
If sing the buttons instead of the touchscreen, press <ENTER>.3Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select 30S (after 30 seconds of inactivity), 1M4. (after 1 minute of inactivity), 5M (after 5 minutes of inactivity), or 30M (after 30 minutes of
inactivity), or touch the display where it says the desired option.
Press <ENTER>.
5.
Loss of Data
In case of an input signal being lost in any way, the Maverick MK2 Spot will respond in one of two
ways. The product will either hold the last signal received, or black out all LED output.
To set which way the product responds, follow the instructions below:
Navigate to the Settings menu.
1. Use <UP> or <DOWN> to select Loss of Data, or touch the display where it says Loss of Data.
2. If using the buttons instead of the touchscreen, press <ENTER>.3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Hold (hold last signal received) or Close4. (black out all LED output), or touch the display where it says the desired option.
Press <ENTER>.
5.
www.carlosmendoza.com.mx

Operation
Maverick MK2 Spot User Manual Rev. 4 -17-
Fan Speed
To set the speed of the fans, do the following:
Navigate to the Settings menu.1. Use <UP> or <DOWN> to select Fans, or touch the display where it says Fans.2. If using the buttons instead of the touchscreen, press <ENTER>.3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Auto (fan speed set according to prod ct4. temperature), Full (maximum speed), or ECO (quiet fans mode), or touch the display whe e it
says the desired option.
Press <ENTER>.
5.
Dimmer Curve
To set the dimmer curve, follow the instructions below:
Navigate to the Settings menu.1. Use <UP> or <DOWN> to select Dimmer Curve, or touch the display where t says Dimmer2. Curve.
If using the buttons instead of the touchscreen, press <ENTER>.3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Linear, Square I Squa, or SCurve, or4. touch the display where it says the desired option.
Press <ENTER>.
5.
Dimmer Speed
To set the dimmer speed, do the following:
Navigate to the Settings menu.1. Use <UP> or <DOWN> to select Dimmer Speed, or to ch the display where it says Dimmer2. Speed.
If using the buttons instead of the touchscreen, ress <ENTER>.3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to s lect Smooth or Fast, or touch the display4. where it says the desired option.
Press <ENTER>.
5.
Reset Functions
To reset the pan, tilt, or all functions as if rom startup:
Navigate to the Settings menu.1. Use <UP> or <DOWN> to selec Reset Function, or touch the display where it says Reset2. Function.
If using the buttons instead of t e touchscreen, press <ENTER>.3. Use <UP> or <DOWN> to s lect the function to reset, from Pan/Tilt, Iris/Prism,4. Color/CMY+CTO, Gobo/Gobo Rotate, Zoom/Frost/Focus or All, or touch the display where it
says the desired o tion
If using the butt s in tead of the touchscreen, press <ENTER>.5. Use <UP> <DOWN>, <LEFT>, or <RIGHT> to select from NO (do not reset) or YES (reset), or6. touch the d play where it says the desired option.
Press <ENTER>.
7.
Factory Reset
To restore th Maverick MK2 Spot to factory default settings, do the following:
N viga e to the Settings menu.1. Use <UP> or <DOWN> to select Factory Settings, or touch the display where it says Factory2. Settings.
If using the buttons instead of the touchscreen, press <ENTER>.3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not reset) or YES (reset to factory4settings), or touch the display where it says the desired option.
Press <ENTER>.
5.
www.carlosmendoza.com.mx