Chewy frisco Sunflower User manual

Assembly
Call 1.800.672.4399 for questions
YES
01. Base Board A.
B.
M10 x 45 mm Bolt (2)
M10 x 50 mm Bolt (1)
C.M10 x 35 mm Bolt (1)
D.40 mm Washer (2)
02. Bolster perch cover
03. Bolster perch cover
04. Post 85 mm
05. Post 200 mm
06. Post 500 mm
Parts Included
Prior to assembly, please be sure to identify and sort all parts shown below.
6
1
A
D
A
D
5
2
3
C
4
B
6
Please Read Through All InstructionsBefore Starting

Assembly
Please Read Through All InstructionsBefore Starting
Step 1.
Step2.
1
D
A
A
D
5
2
3
C
4
B
6
Secure sisal post 5 and 6 to base board 1 with
bolt A and washer D.
Then secure post 4 to the right bottom sisal post,
using bolt
bolt
B.
At last, secure left upper bolster perch cover 2 to
sisal post 6. Then secure the bolster perch cover 3
to post 4 using C.
Call 1.800.672.4399for questions

Warning
&Cautions Cleaning & Maintenance
Spot clean stains and vacuum fur(using small handheld or
attachment) when necessary.
Questions
Questions? Call our friendly customer service anytime.
We’re here 24/7 at 1.800. 672. 4399
PLEASE READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS
TO AVOID PET INJURY OR PROPERTY DAMAGES..
Keepall tools and instructions in a safe place for future reference.
Follow the instructions carefully and make sure you’ve
This cat tree is intended for cat use only,pleasekeep children
away.
Keep all small parts away from children/ pets to avoid choking
hazards.
Never climb, rock, shake, step or hang onthe cat tree.
Placeyourcattree indoors,awayfrom directsunlightordampareas.
Cat trees should be placed on aflat, level surface for stability.
Check your cat tree often for loose screws or pares that might need
re-tightening.
If your cat tree gets torn or damaged, please discard it.
The product photo may vary slightly from your fully assembled
cat tree asthis product is continually being enhanced.
completed each step.