Chicago Electric 93431 Installation manual

5” RANDOM ORBITAL
PALM SANDER
Model 93431
SET UP AND OPERATING INSTRUCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright©2005 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of Harbor
Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements,
actual product may differ slightly from the product described herein.
For technical questions or replacement parts, please call 1-800-444-3353.
Manual Revised 10f

Page 2For technical questions, please call 1-800-444-3353.SKU 93431
SAVE THIS MANUAL
Keep this manual for the safety warnings
and precautions, assembly, operating,
inspection, maintenance and cleaning
procedures. Write the product’s serial number
in the back of the manual near the assembly
diagram (or month and year of purchase if
product has no number). Keep this manual
and the receipt in a safe and dry place for
future reference.
IMPORTANT SAFETY
INFORMATION
In this manual, on the labeling, and
all other information provided with
this product:
This is the safety alert
symbol. It is used to alert
you to potential personal
injury hazards. Obey all
safety messages that follow
this symbol to avoid possible
injury or death.
DANGER indicates a
hazardous situation
which, if not avoided, will result
in death or serious injury.
WARNING indicates a
hazardous situation
which, if not avoided, could
result in death or serious injury.
CAUTION, used with
the safety alert
symbol, indicates a hazardous
situation which, if not avoided,
could result in minor or moderate
injury.
NOTICE is used to
address practices not
related to personal injury.
CAUTION, without the
safety alert symbol, is
used to address practices not
related to personal injury.
General Power Tool Safety Warnings
WARNING Read all safety warnings
and instructions. Failure to follow the
warnings and instructions may result
in electric shock, re and/or serious
injury.
Save all warnings and instructions
for future reference.
The term ″power tool″ in the warnings
refers to your mains-operated (corded)
power tool or battery-operated
(cordless) power tool.
Work area safety1.
Keep work area clean and well lit.a.
Cluttered or dark areas invite accidents.
Do not operate power tools inb.
explosive atmospheres, such as in the
presence of ammable liquids, gases
or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep children and bystandersc.
away while operating a power tool.
Distractions can cause you to lose
control.
Electrical safety2.
Power tool plugs must match thea.
outlet. Never modify the plug in
any way. Do not use any adapter
plugs with grounded power tools.
Unmodied plugs and matching outlets
will reduce risk of electric shock.
Avoid body contact with groundedb.
surfaces such as pipes, radiators,
ranges and refrigerators. There is an

Page 3For technical questions, please call 1-800-444-3353.SKU 93431
increased risk of electric shock if your
body is grounded.
Do not expose power tools to rain orc.
wet conditions. Water entering a power
tool will increase the risk of electric
shock.
Do not abuse the cord. Never used.
the cord for carrying, pulling or
unplugging the power tool. Keep cord
away from heat, oil, sharp edges or
moving parts. Damaged or entangled
cords increase the risk of electric shock.
When operating a power toole.
outdoors, use an extension cord
suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk
of electric shock.
If operating a power tool in a dampf.
location is unavoidable, use a Ground
Fault Circuit Interrupter (GFCI)
protected supply. Use of a GFCI
reduces the risk of electric shock.
Personal safety3.
Stay alert, watch what you area.
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
under the inuence of drugs, alcohol
or medication. A moment of inattention
while operating power tools may result in
serious personal injury.
Use safety equipment. Always wearb.
eye protection. Safety equipment such
as dust mask, non-skid safety shoes,
hard hat, or hearing protection used
for appropriate conditions will reduce
personal injuries.
Prevent unintentional starting. Ensurec.
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying
the tool. Carrying power tools with your
nger on the switch or energizing power
tools that have the switch on invites
accidents.
Remove any adjusting key or wrenchd.
before turning the power tool on.
A wrench or a key left attached to a
rotating part of the power tool may result
in personal injury.
Do not overreach. Keep propere.
footing and balance at all times. This
enables better control of the power tool
in unexpected situations.
Dress properly. Do not wear loosef.
clothing or jewelry. Keep your hair,
clothing and gloves away from
moving parts. Loose clothes, jewelry or
long hair can be caught in moving parts.
If devices are provided for theg.
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use of
these devices can reduce dust-related
hazards.
Only use safety equipment that hash.
been approved by an appropriate
standards agency. Unapproved safety
equipment may not provide adequate
protection. Eye protection must be
ANSI-approved and breathing protection
must be NIOSH-approved for the specic
hazards in the work area.
Power tool use and care4.
Do not force the power tool. Usea.
the correct power tool for your
application. The correct power tool will
do the job better and safer at the rate for
which it was designed.
Do not use the power tool if theb.
switch does not turn it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must
be repaired.
Disconnect the plug from the powerc.
source and/or the battery pack from

Page 4For technical questions, please call 1-800-444-3353.SKU 93431
the power tool before making any
adjustments, changing accessories,
or storing power tools. Such
preventive safety measures reduce
the risk of starting the power tool
accidentally.
Store idle power tools out of the reachd.
of children and do not allow persons
unfamiliar with the power tool or
these instructions to operate the
power tool. Power tools are dangerous
in the hands of untrained users.
Maintain power tools. Check fore.
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power
tool’s operation. If damaged, have
the power tool repaired before use.
Many accidents are caused by poorly
maintained power tools.
Keep cutting tools sharp and clean.f.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
Use the power tool, accessories andg.
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
Service5.
Have your power tool serviced by aa.
qualied repair person using only
identical replacement parts. This will
ensure that the safety of the power tool
is maintained.
Safety Warnings Common for
Sanding Operations
This power tool is intended to1.
function as a sander. Read all safety
warnings, instructions, illustrations
and specications provided with
this power tool. Failure to follow all
instructions listed below may result in

Operations such as grinding, wire2.
brushing, polishing or cutting-off are
not recommended to be performed
with this power tool. Operations for
which the power tool was not designed
may create a hazard and cause personal

Do not use accessories which3.
are not specically designed
and recommended by the tool
manufacturer. Just because the
accessory can be attached to your power
tool, it does not assure safe operation.
The rated speed of the accessory4.
must be at least equal to the
maximum speed marked on the power
tool. Accessories running faster than

apart.
The outside diameter and the5.
thickness of your accessory must
be within the capacity rating of
your power tool. Incorrectly sized
accessories cannot be adequately
guarded or controlled.
The arbor size of wheels, anges, 6.
backing pads or any other accessory
must properly t the spindle of the
power tool. Accessories with arbor
holes that do not match the mounting
hardware of the power tool will run out
of balance, vibrate excessively and may
cause loss of control.
Do not use a damaged accessory.7.
Before each use inspect the
accessory such as abrasive wheels
for chips and cracks, backing pad
for cracks, tear or excess wear,

Page 5For technical questions, please call 1-800-444-3353.SKU 93431
wire brush for loose or cracked
wires. If power tool or accessory
is dropped, inspect for damage or
install an undamaged accessory.
After inspecting and installing an
accessory, position yourself and
bystanders away from the plane of
the rotating accessory and run the
power tool at maximum no-load speed
for one minute. Damaged accessories
will normally break apart during this test
time.
Wear personal protective equipment.8.
Depending on application, use face
shield, safety goggles or safety
glasses. As appropriate, wear dust
mask, hearing protectors, gloves
and workshop apron capable of
stopping small abrasive or work piece
fragments. The eye protection must
be capable of stopping ying debris
generated by various operations.
The eye protection must be capable

various operations. The dust mask or

particles generated by your operation.
Prolonged exposure to high intensity
noise may cause hearing loss.
Keep bystanders a safe distance away9.
from work area. Anyone entering
the work area must wear personal
protective equipment. Fragments of
work piece or of a broken accessory

immediate area of operation.
Hold power tool by insulated gripping10.
surfaces only, when performing an
operation where the accessory may
contact hidden wiring or its own cord.

may make exposed metal parts of the

Position the cord clear of the spinning11.
accessory. If you lose control, the cord
may be cut or snagged and your hand
or arm may be pulled into the spinning
accessory.
Never lay the power tool down until12.
the accessory has come to a complete
stop. The spinning accessory may grab
the surface and pull the power tool out of
your control.
Do not run the power tool while13.
carrying it at your side. Accidental
contact with the spinning accessory
could snag your clothing, pulling the
accessory into your body.
Regularly clean the power tool’s air14.
vents. The motor’s fan will draw the
dust inside the housing and excessive
accumulation of powdered metal may
cause electrical hazards.
Do not operate the power tool near15.
ammable materials. Sparks could
ignite these materials.
Do not use accessories that require16.
liquid coolants. Using water or other
liquid coolants may result in electrocution
or shock.
Maintain labels and nameplates on17.
the tool. These carry important safety
information. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
Avoid unintentional starting. Prepare to18.
begin work before turning on the tool.
Do not leave the tool unattended when19.
it is plugged into an electrical outlet.
Turn off the tool, and unplug it from its
electrical outlet before leaving.
Use clamps (not included) or other20.
practical ways to secure and support the
workpiece to a stable platform. Holding

Page 6For technical questions, please call 1-800-444-3353.SKU 93431
the work by hand or against your body is
unstable and may lead to loss of control

This product is not a toy. Keep it out of21.
reach of children.
People with pacemakers should22.
consult their physician(s) before use.

to heart pacemaker could cause
pacemaker interference or pacemaker
failure. In addition, people with
pacemakers should:


electrical shock.

grounded. Ground Fault Circuit
Interrupter (GFCI) should also be
implemented – it prevents sustained
electrical shock.
WARNING: Some dust created by power23.
sanding, sawing, grinding, drilling, and
other construction activities, contains
chemicals known [to the State of
California] to cause cancer, birth defects
or other reproductive harm. Some
examples of these chemicals are:


cement or other masonry products

treated lumber
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to
these chemicals: work in a well ventilated
area, and work with approved safety
equipment, such as those dust masks

microscopic particles. (California Health
& Safety Code § 25249.5, et seq.)
WARNING: Handling the cord on this24.
product will expose you to lead, a
chemical known to the State of California
to cause cancer, and birth defects or
other reproductive harm. Wash hands
after handling. (California Health &
Safety Code § 25249.5, et seq.)
The warnings, precautions, and25.
instructions discussed in this instruction
manual cannot cover all possible
conditions and situations that may occur.
It must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
Kickback and Related Warnings
Kickback is a sudden reaction to a
pinched or snagged rotating wheel, backing
pad, brush or any other accessory. Pinching
or snagging causes rapid stalling of the
rotating accessory which in turn causes the
uncontrolled power tool to be forced in the
direction opposite of the accessory’s rotation
at the point of the binding.
For example, if an abrasive wheel is
snagged or pinched by the workpiece, the
edge of the wheel that is entering into the
pinch point can dig into the surface of the
material causing the wheel to climb out or

or away from the operator, depending on
direction of the wheel’s movement at the point
of pinching. Abrasive wheels may also break
under these conditions.
Kickback is the result of power tool

or conditions and can be avoided by taking
proper precautions as given below.
Maintain a rm grip on the power 1.
tool and position your body and
arm to allow you to resist kickback
forces. Always use auxiliary handle, if
provided, for maximum control over
kickback or torque reaction during

Page 7For technical questions, please call 1-800-444-3353.SKU 93431
start-up. The operator can control
torque reactions or kickback forces, if
proper precautions are taken.
Never place your hand near the2.
rotating accessory. Accessory may
kickback over your hand.
Do not position your body in the3.
area where power tool will move
if kickback occurs. Kickback will
propel the tool in direction opposite to
the wheel’s movement at the point of
snagging.
Use special care when working4.
corners, sharp edges etc. Avoid
bouncing and snagging the
accessory. Corners, sharp edges or
bouncing have a tendency to snag the
rotating accessory and cause loss of
control or kickback.
Do not attach a saw chain5.
woodcarving blade or toothed saw
blade. Such blades create frequent
kickback and loss of control.
Safety Warnings Specic for
Sanding Operations
Do not use excessively oversized1.
sanding disc paper. Follow
manufacturer’s recommendations
when selecting sanding paper. Larger
sanding paper extending beyond the
sanding pad presents a laceration
hazard and may cause snagging, tearing
of the disc or kickback.
Vibration Safety
This tool vibrates during use. Repeated


particularly to the hands, arms and shoulders.

Anyone using vibrating tools regularly1.

be examined by a doctor and then have

medical problems are not being caused
or worsened from use. Pregnant
women or people who have impaired
blood circulation to the hand, past hand

diabetes, or Raynaud’s Disease should
not use this tool. If you feel any medical
or physical symptoms related to vibration
(such as tingling, numbness, and white

soon as possible.
Do not smoke during use. Nicotine2.
reduces the blood supply to the hands


Wear suitable gloves to reduce the3.
vibration effects on the user.
Use tools with the lowest vibration when4.
there is a choice between different
processes.
5.
of work.
Grip tool as lightly as possible (while still6.

do the work.
To reduce vibration, maintain the tool7.
as explained in this manual. If any
abnormal vibration occurs, stop use
immediately.
SAVE THESE
INSTRUCTIONS.

Page 8For technical questions, please call 1-800-444-3353.SKU 93431
GROUNDING
TO PREVENT
ELECTRIC SHOCK
AND DEATH FROM INCORRECT
GROUNDING WIRE
CONNECTION:
Check with a qualied electrician
if you are in doubt as to whether
the outlet is properly grounded.
Do not modify the power cord
plug provided with the tool.
Never remove the grounding
prong from the plug. Do not use
the tool if the power cord or plug
is damaged. If damaged, have it
repaired by a service facility
before use. If the plug will not t
the outlet, have a proper outlet
installed by a qualied
electrician.
Double Insulated Tools: Tools with
Two Prong Plugs
Outlets for 2-Prong Plug
Tools marked “Double Insulated” do not1.
require grounding. They have a special

OSHA requirements and complies with
the applicable standards of Underwriters

Standard Association, and the National
Electrical Code.
Double insulated tools may be used in2.
either of the 120 volt outlets shown in the
preceding illustration. (See Outlets for
2-Prong Plug.)
Extension Cords
Grounded1. tools require a three wire
extension cord. Double Insulated
tools can use either a two or three wire
extension cord.
As the distance from the supply outlet2.
increases, you must use a heavier gauge
extension cord. Using extension cords
with inadequately sized wire causes a
serious drop in voltage, resulting in loss
of power and possible tool damage.
(See Table A.)
The smaller the gauge number of the3.
wire, the greater the capacity of the cord.
For example, a 14 gauge cord can carry
a higher current than a 16 gauge cord.
(See Table A.)
When using more than one extension4.
cord to make up the total length, make
sure each cord contains at least the
minimum wire size required. (See Table
A.)
If you are using one extension cord for5.
more than one tool, add the nameplate
amperes and use the sum to determine
the required minimum cord size. (See
Table A.)
If you are using an extension cord6.
outdoors, make sure it is marked with the

is acceptable for outdoor use.
Make sure the extension cord is properly7.
wired and in good electrical condition.
Always replace a damaged extension

electrician before using it.
Protect the extension cords from sharp8.

wet areas.

Page 9For technical questions, please call 1-800-444-3353.SKU 93431
RECOMMENDED MINIMUM WIRE GAUGE
FOR EXTENSION CORDS* (120/240 VOLT)
NAMEPLATE
AMPERES
(at full load)
EXTENSION CORD
LENGTH
25’ 50’ 75’ 100’ 150’
0 – 2.0 18 18 18 18 16
2.1 – 3.4 18 18 18 16 14
3.5 – 5.0 18 18 16 14 12
5.1 – 7.0 18 16 14 12 12
7.1 – 12.0 18 14 12 10 
12.1 – 16.0 14 12 10  
16.1 – 20.0 12 10 
TABLE A
* Based on limiting the line
voltage drop to ve volts at 150%
of the rated amperes.
Symbology
Double Insulated
Canadian Standards Association

V~ Volts Alternating Current
AAmperes
OPM Orbits Per Minute
n0 
(RPM)

Page 10For technical questions, please call 1-800-444-3353.SKU 93431
SPECIFICATIONS
Electrical Input 
 12,000 OPM
Orbit Diameter 
Max. Accessory
Diameter
5” (127 mm)
8 hole hook and loop
1x 80 grit sanding disc included
E194601
UNPACKING
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor

possible.
INSTRUCTIONS FOR PUTTING
INTO USE
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Turn the Switch off and unplug
the tool from its electrical outlet
before assembling or making any
adjustments to the tool.
Note: For additional information regarding the
parts listed in the following pages, refer
to the Assembly Diagram near the end of
this manual.
Attaching the Dust Bag
Dust
Bag (28)
1. Slide the Dust Bag onto the back of

pressure.
The collection of the dust will only work if2.
the sandpaper has holes that line up with
the 8 dust collection holes in the Backing
Pad. There are 4 other holes in the
Backing Pad for the Screws that attach
the Backing Pad to the Sander.
OPERATING INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.
Tool Set Up
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Turn the Switch off and unplug
the tool from its electrical outlet
before installing accessories.

Page 11For technical questions, please call 1-800-444-3353.SKU 93431
Attaching Sandpaper to the Backing Pad
Backing
Pad (23)
Switch
(15)
The Sanding Disc is attached by Hook

Sanding Disc on the Backing Pad lining
up the 8 holes so that the dust can be
collected into the Dust Bag.
Work Piece and Work Area Set Up
Designate a work area that is clean and1.

access by children or pets to prevent

Route the power cord along a safe2.
route to reach the work area without
creating a tripping hazard or exposing
the power cord to possible damage. The
power cord must reach the work area
with enough extra length to allow free
movement while working.
Secure loose work pieces using a vise3.
or clamps (not included) to prevent
movement while working.
4.

nearby that will present a hazard while
working. Make sure the wood you are
sanding does not have any nails or
metal of any kind in it, or you will ruin
the sandpaper and damage the Backing
Pad.
You must use personal safety equipment5.

approved eye and hearing protection, as
well as heavy work gloves.
Before beginning work, provide for6.

surface.
General Operating Instructions
Turn on the Sander using the Switch.1.
Run the Sander for a few seconds before2.
contacting the workpiece.
Contact the workpiece with minimal3.
pressure. If the Sander is not removing
enough material, try a grittier piece of
sandpaper. If you want to remove a lot
of material fast, use a belt sander.
Note: All orbital sanders leave sanding marks
on the workpiece. To minimize sanding
marks, always try to sand with the grain
of the wood.
Occasionally check the sandpaper4.
for tears, wear, or fraying. Replace if
necessary.
5.
Switch.
Allow the tool to come to a complete stop6.
before setting it down.
To prevent accidents, turn off the tool7.
and disconnect its power supply after
use. Clean, then store the tool indoors
out of children’s reach.

Page 12For technical questions, please call 1-800-444-3353.SKU 93431
MAINTENANCE AND
SERVICING
Procedures not specically
explained in this manual must
be performed only by a qualied
technician.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Turn the Switch off and unplug
the tool from its electrical outlet
before performing any
inspection, maintenance, or
cleaning procedures.
TO PREVENT SERIOUS INJURY
FROM TOOL FAILURE:
Do not use damaged equipment.
If abnormal noise or vibration
occurs, have the problem
corrected before further use.
Cleaning, Maintenance, and
Lubrication
BEFORE EACH USE,1. inspect the
general condition of the tool. Check for
loose screws, misalignment or binding of
moving parts, cracked or broken parts,
damaged electrical wiring, and any
other condition that may affect its safe
operation.
AFTER USE,2. wipe external surfaces of
the tool with clean cloth.
Periodically blow dust and grit out of the3.
motor vents using dry compressed air.


while doing this.
4.
technician clean or replace the Carbon
Brushes (9).
5. WARNING! If the supply cord of
this power tool is damaged, it must be
replaced only by a qualied service
technician.

Page 13For technical questions, please call 1-800-444-3353.SKU 93431
Troubleshooting
Problem Possible Causes Likely Solutions
Tool will not start. Cord not connected.1.
No power at outlet.2.
Internal damage or wear. (Carbon3.
brushes or switch, for example.)
Check that cord is plugged in.1.
Check power at outlet. If outlet is2.
unpowered, turn off tool and check circuit
breaker. If breaker is tripped, make sure
circuit is right capacity for tool and circuit
has no other loads.
Have technician service tool.3.
Tool operates slowly. Excess pressure applied to workpiece.1.
Power being reduced by long or small2.
diameter extension cord.
Decrease pressure, allow tool to do the1.
work.
Eliminate use of extension cord. If an2.
extension cord is needed, use one with
the proper diameter for its length and load.
See Extension Cords in GROUNDING
section.
Performance
decreases over time.
Carbon brushes worn or damaged. 
Excessive noise or
rattling.
Internal damage or wear. (Carbon
brushes or bearings, for example.)
Have technician service tool.
Overheating. Forcing tool to work too fast.1.
Blocked motor housing vents.2.
Motor being strained by long or small3.
diameter extension cord.
Allow tool to work at its own rate.1.
2.

while blowing dust out of motor using
compressed air.
Eliminate use of extension cord. If an3.
extension cord is needed, use one with
the proper diameter for its length and load.
See Extension Cords in GROUNDING
section.
Tool does not sand
effectively.
Disc accessory may be damaged, worn or
wrong type for the material.
Check condition and type of disc accessory.
Use only proper type of disc accessory in
good condition.
Follow all safety precautions whenever diagnosing or servicing the tool.
Disconnect power supply before service.

Page 14For technical questions, please call 1-800-444-3353.SKU 93431
Part Description Qty.
1 Top Enclosure 1
2 Bottom Enclosure 1
3 Stator 1
4 Rotor 1
5 1
6 1
7 Bearing 6x19x6 1
8 Brush Holder 2
9 Carbon Brush 2
10 Cord Anchor 1
Part Description Qty.
11 Screw ST3.5x16 2
12 Cord Guard 1
13 Power Cord 1
14 Switch Cover 1
15 Switch 1
16 Bearing 9x26x8 1
17 Balance Fan 1
18 Bearing Holder 1
19 Bearing 15x32x9 1
20 Damper 1
Part Description Qty.
21 Gasket 1
22 Screw M4x12 1
23 Backing Pad 1
24 Gasket M4 4
25 Spring Gasket 4
26 Screw M4x8 4
27 Screw 4.2x20 4
28 Dust Bag 1
29 Sanding Disc 1
PLEASE READ THE FOLLOWING CAREFULLY


DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE






PARTS LIST
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not available
individually as replacement parts.

Page 15For technical questions, please call 1-800-444-3353.SKU 93431
ASSEMBLY DIAGRAM
(29) Sanding Disc (80 Grit)
not shown

Page 16For technical questions, please call 1-800-444-3353.SKU 93431
LIMITED 90 DAY WARRANTY
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and
durability standards, and warrants to the original purchaser that this product is free from defects
in materials and workmanship for the period of 90 days from the date of purchase. This warranty
does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents,
repairs or alterations outside our facilities, criminal activity, improper installation, normal wear

or property, or for incidental, contingent, special or consequential damages arising from the use
of our product. Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS


To take advantage of this warranty, the product or part must be returned to us with
transportation charges prepaid. Proof of purchase date and an explanation of the complaint must

the product at our election or we may elect to refund the purchase price if we cannot readily and
quickly provide you with a replacement. We will return repaired products at our expense, but if
we determine there is no defect, or that the defect resulted from causes not within the scope of
our warranty, then you must bear the cost of returning the product.

from state to state.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • [phone]