Chicago Electric 96350 25W User manual

MONO-CRYSTAL SOLAR PANEL
Model 96350
25W
Model 96351
50W
Model 96352
75W
OPERATION INSTRUCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright©2007 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of Harbor
Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements,
actual product may differ slightly from the product described herein. Tools required for assembly and service
may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 09j

Page 2
For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Description: Model 96350 25W Model 96351 50W Model 96352 75W
Material
Mono-Crystalline Silicon
Cells
Tempered Glass Panel
White PVC Backing
Mono-Crystalline Silicon
Cells
Tempered Glass Panel
White PVC Backing
Mono-Crystalline Silicon
Cells
Tempered Glass Panel
White PVC Backing
Finish
Anodized Aluminum
Frame
12 Blue Solar Cells
Red & Black Lead Wire
Anodized Aluminum
Frame
36 Black Solar Cells
Red & Black Lead Wire
Anodized Aluminum
Frame
12 Blue Solar Cells
Red & Black Lead Wire
Dimensions
Overall
11-5/8” W X 32-5/8” L
X 1” Thick
21-1/2” W X 32-3/8” L
X 1-3/8” Thick
21-1/2” W X 47” L
X 1-3/8” Thick
Cell Dimensions 3-1/4” H X 4-7/8” L
X 36-Cells
3-1/4” H X 4-7/8” L
X 36-Cells 4-7/8” Square X 36-Cells
Rated Watts 25 Watts Peak (±5%)@
77°F/25°C
50 Watts Peak (± 5%)@
77°F/25°C
75 Watts Peak (± 5%)@
77°F/25°C
Nominal Voltage 12 Volts DC 12 Volts DC 12 Volts DC
Open Circuit
Voltage 21.5 VDC 21.5 VDC 21.5 VDC
Working
Current 1.51 AMPS 2.91 AMPS 4.36 AMPS
Short Circuit
Current 1.63 AMPS 3.2 AMPS 4.8 AMPS
Net Weight 8.1 lb 12.1 lb 20.2 lb
Blocking Diode Built-in Built-in Built-in
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product’s serial number in the back of the manual near the assembly
diagram, or write month and year of purchase if product has no serial number. Keep this
manual and invoice in a safe and dry place for future reference.

Page 3
For technical questions, please call 1-800-444-3353.
GENERAL AND SPECIFIC SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
Do not wire multiple panels in series.1. If you need to connect two or more solar
panels together, this work must be done by a qualified electrician.
Inspect before use and do not use if damaged, or if any parts are loose.2.
Always wear ANSI-approved safety goggles and heavy duty work gloves dur-3.
ing installation, inspection and/or maintenance.
Mount securely out of reach of children.4.
Always use a charge controller.5.
Keep your work area clean and well lit.6. Cluttered areas invite accidents.
Stay alert. Watch what you are doing, and use common sense when installing7.
this Solar Panel. A moment of inattention may result in serious personal injury.
Do not overreach. Keep proper footing and balance at all times.8. Proper footing
and balance enables better control in unexpected situations.
Maintain labels and nameplates.9. These carry important information. If unread-
able or missing, contact Harbor Freight Tools for a replacement.
WARNING: The brass components of this product contain lead, a chemical10.
known to the State of California to cause birth defects (or other reproductive
harm). (California Health & Safety code § 25249.5, et seq.)
NOTE: Some batteries will be damaged if they are continuously charged.11. THE
USE OF A 10 AMP CHARGE CONTROLLER (NOT SUPPLIED) IS REQUIRED IF
THIS SOLAR PANEL IS USED TO CHARGE ANY BATTERY.
REV 07j

Page 4
For technical questions, please call 1-800-444-3353.
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
ASSEMBLY INSTRUCTIONS
NOTE: This Solar Panel comes completely assembled, but requires installation.
WIRING INSTRUCTIONS
NOTE: This Solar Panel produces direct current when in the presence of sunlight. The
amount of electricity produced increases as the sunlight becomes stronger. Less
amperage is produced in less sunlight, but this panel will generate electricity even
on cloudy days. This Solar Panel may be used to power small 12 volt items directly,
such as lights or small motors. It may also be used to trickle charge 12 volt storage
batteries, such as car or boat batteries. Multiple panels can be wired together for
use in residential or commercial solar power systems.
NOTE: If you are not familiar with wiring an electrical product such as this Solar Panel,
then use of a certified electrician is recommended.
A weatherproof Connector Box is attached to the back of each solar panel. There1.
is a red (positive) (+) wire and a black (negative) (-) wire coming out.
MOUNTING THIS SOLAR PANEL
This Solar Panel is constructed of shock resistant glass mounted in a sturdy alumi-1.
num frame. It is rugged and durable.
For optimum operation, mount your Solar Panel in a place that is exposed to maxi-2.
mum sunlight and protected from damage.
Mounting hardware is not supplied but here are some suggestions for effective3.
mounting.
Do not drill through the aluminum frame. You may damage the frame or breaka.
the glass. Devise brackets, clamps or a frame to hold the Solar Panel snugly
as a unit.
Use semi-flexible bumpers under the Panel to protect it from being crushed, andb.
to allow air to circulate under the Panel.
Route the Wire in a way that it will not be exposed to excessive moisture, heat,c.
or any corrosive or damaging conditions.
REV 07j

Page 5
For technical questions, please call 1-800-444-3353.
INSPECTION, MAINTENANCE, AND CLEANING
WARNING! Make sure the Solar Panel is unplugged from its electrical outlet
before performing any inspection, maintenance, or cleaning procedures.
Periodically inspect the general condition of the Solar Panel. Check for broken Glass,1.
damaged electrical wiring, or any other condition that may affect its safe operation.
If anything abnormal is discovered, have the problem corrected before further use.
Do not use Solar Panels that are damaged in any way.
Do not leave this panel unattended and attached to any appliance, light or motor2.
which may cause injury or damage if it operates without supervision.
Keep the Solar Panel clean. Wipe it occasionally with a damp cloth using mild de-3.
tergent. Do not use abrasive cleaners. Dirt on the glass will reduce the capacity of
the panel to receive sunlight.
MAINTENANCE CHART
Maintenance Type Yearly
Inspect tool for damage
(see #1 above) X
Wipe off with clean, damp
cloth (see #3 above) X
TROUBLESHOOTING
Problem Possible Causes Probable Solutions
Solar Panel is not
charging
Wiring may be cracked or1.
damaged.
Panel possibly being blocked from2.
sunlight.
Check all wires and tighten all1.
connections. Replace damaged
wire.
Cut away shrubbery, brush or tree2.
limbs that may be blocking sunlight.

Page 6
For technical questions, please call 1-800-444-3353.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND
ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANU-
FACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND
TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT,
OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE
MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS
REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND
NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR
HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING
OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: There are no replacement parts for this product.
LIMITED 90 DAY WARRANTY
Harbor Freight Tools Co. makes every effort to assure that its products meet high
quality and durability standards, and warrants to the original purchaser that this product
is free from defects in materials and workmanship for the period of 90 days from the date
of purchase. This warranty does not apply to damage due directly or indirectly, to misuse,
abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity,
improper installation, normal wear and tear, or to lack of maintenance.We shall in no event
be liable for death, injuries to persons or property, or for incidental, contingent, special
or consequential damages arising from the use of our product. Some states do not allow
the exclusion or limitation of incidental or consequential damages, so the above limitation
of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with
transportation charges prepaid. Proof of purchase date and an explanation of the com-
plaint must accompany the merchandise. If our inspection verifies the defect, we will either
repair or replace the product at our election or we may elect to refund the purchase price
if we cannot readily and quickly provide you with a replacement. We will return repaired
products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning
the product.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • [phone]
REV 07j