AFG R515 User manual

Convertible Crib and
Changer
(R515/516/518/519)
THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE.
If you have any questions or missing parts, please contact us. DO NOT return product
parts to the store where it was purchased before contacting AFG Customer Service.
AFG Customer Service:
E-mail: [email protected]
Tel: (323) 722-6268
Model No: R515/516/518/519
PO #:
Serial #:

2021 AFG Baby Furniture R515/516/518/519 Assembly Sheet © 2
Product Assistance Procedures
AFG International Products strives to ensure that our customers are receiving a quality piece of
furniture. We want our customers to be satisfied with using our products for years to come. In
the event that you need assistance or have any inquiries regarding our products, please feel
free to contact us with the information below.
Customer Service Email: service@afgbabyfurniture.com
Customer Service Phone Number: 1.323.722.6268
To request replacement parts, please send an email to our customer service with the
following information and we will do our best to assist you.
1. Proof of Purchase*
2. Item Number of the Product or Identification Sticker**
3. Part Letter or Number of the Replacement Part
4. Quantity
5. Your Shipping Address
6. Description of Your Problem
Please also provide pictures of the issue whenever possible. This will help us understand and
assist you with your problem.
*Acceptable Proof of Purchase includes, but not limited to, your Online Purchase Confirmation
Email, a screenshot of the purchase history of the online retailer, or a receipt from your local store.
Our warranty extends only to the original purchaser and is non-transferable. Warranty is
valid only when the proof of purchase can be provided.
Please retain a copy of your purchase records for future inquires.
**All of our baby products come with an identification sticker. This is a white sticker that contains all the
product information of the item.
For cribs, the identification sticker is generally located near the bottom of the crib’s side rails, the toddler
guardrail, or the stabilizer bar.
For changers, the identification sticker is located on the top panel of the changing unit.
Under no circumstances should you remove any warning labels from the product. These
labels are meant to be permanent and removing them may damage the wood and void
your warranty.

2021 AFG Baby Furniture R515/516/518/519 Assembly Sheet © 3

2021 AFG Baby Furniture R515/516/518/519 Assembly Sheet © 4

2021 AFG Baby Furniture R515/516/518/519 Assembly Sheet © 5
R515/516/518/519 Crib Parts Diagram

2021 AFG Baby Furniture R515/516/518/519 Assembly Sheet © 6
R515/516/518/519 Crib Parts Identification Sheet
A. Left Side Panel
(1 pc) B. Rear Left Leg
(1 pc) C. Front Left Leg
(1 pc) D. Right Side Panel
(1 pc)
E. Rear Right Leg
(1 pc) E1. Changer Rear
Right Leg
(1 pc)
G. Headboard
(1 pc) H. Footboard
(1 pcs)
I. Cross Bar
(2 pc) J. Changer Right Side
Panel
(1 pc)
K. Front Top Cross Bar
(1 pc) L. Front Upper Cross
Bar
(1pc)
M. Middle Cross Bar
(2 pcs) N. Front Bottom Cross Bar
(1 pc)

2021 AFG Baby Furniture R515/516/518/519 Assembly Sheet © 7
R515/516/518/519 Crib Parts Identification Sheet

2021 AFG Baby Furniture R515/516/518/519 Assembly Sheet © 8
R515/516/518/519 Crib Parts Identification Sheet
♦HARDWARE
1. Bolt M6 x 90 mm (6 pcs) 2. Bolt M6 x 50 mm (14 pcs)
3. M6 x 45 mm (4 pcs) 4. M6 x 18mm (16 pcs) 5. Dowel 8mm x 30 mm
(34 pcs) 6. Wrench (1 pc)
7. Bolt M4 x 32 mm
(6 pcs) 8. Screw F4 x 25mm
(24 pcs)
9. barrel Nut M6 x 13 mm(2 pcs) 10. barrel Nut M6 x 18 mm (10 pcs)
11. Bolt M6 x 55 mm (4 pcs) 12. Bolt M6 x 65 mm (8 pcs)
PHILLIPS SCREWDRIVER (NOT INCLUDED)
FLATHEAD SCREWDRIVER (NOT INCLUDED)

2021 AFG Baby Furniture R515/516/518/519 Assembly Sheet © 9
R515/516/518/519 Drawer Assembly Sheet
STEP 1:
Attach Drawer Left Panel (A3) and Drawer Right Panel (A4) to Drawer Front Panel (A1) by using 4
Screws (#8).
STEP 2:
Slider Drawer Bottom Panel (A5) into the grooves

2021 AFG Baby Furniture R515/516/518/519 Assembly Sheet © 10
R515/516/518/519 Drawer Assembly Sheet
STEP 3:
Attach Drawer Back Panel (A2) to Drawer Left Panel (A3) and Drawer Right Panel (A4) by using 4
Screws (#8).
STEP 4:
Insert Dresser Handle (A6) to Drawer Front Panel (A1) by using 2 bolts (#7)

2021 AFG Baby Furniture R515/516/518/519 Assembly Sheet © 11
R515/516/518/519 Changer Assembly Sheet
STEP 1:
Attach Rear Right Leg (E) to Right Side Panel (D) and secure with 2 Bolts (#1) to the top and bottom
holes. Tighten firmly with the Wrench (#6)
STEP 2:
a. Place dowels (#5) into both sides of the Top Cross Bar (K), Front Upper Cross Bar (L), 2 Middle
Cross Bars (M), Front Bottom Cross Bar (N), Back Upper Cross Bar (P), Back Bottom Cross Bar
(Q), and Middle Bottom Cross Bar (R). Please note Back Top Cross Bar (O) will be assembled
later.
b. Attach the above parts to the Right Side Panel (D) by using 6 Bolts (#2). Tighten firmly with Wrench
(#6).

2021 AFG Baby Furniture R515/516/518/519 Assembly Sheet © 12
R515/516/518/519 Crib Assembly Sheet
STEP 3:
Insert Changer Top Panel (S), Changer Middle Panel (T), Changer Shelf (U), Changer Bottom Panel (V),
and Changer Back Panel (W) into the grooves. Make sure the Changer Top Panel and Changer Bottom
Panel are inserted in the correct direction (The drawer tracks are the Front of this Step)
STEP 4:
Place drawer right side panel (J) on top securing with 7 bolts (#2). Note all parts should be inserted into respective
grooves before start tightening by the bolts.

2021 AFG Baby Furniture R515/516/518/519 Assembly Sheet © 13
R515/516/518/519 Crib Assembly Sheet
STEP 5:
a. Place 2 Dowels (#5) into the Left Side Panel (A).
b. Insert 2 Security Barrel Nuts (#10) from the underside of the top rail of the Left Side Panel (A) and 2
Barrel Nuts (#9) from the right side of the bottom rail of the Left Side Panel to attach Front Left Leg
(C) and Rear Left Leg (B) with 4 Bolts (#1). Tighten firmly with the Wrench (#6).
STEP 6:
Attach Headboard (G) to Rear Left Leg (B) on the Left Side Panel (A) and Rear Right Leg (E) on the
changer unit by inserting 4 Security Barrel Nuts (#10) from the underside of all four corners of the
Headboard and securing with 4 Bolts (#12). Tighten firmly with the Wrench (#6).

2021 AFG Baby Furniture R515/516/518/519 Assembly Sheet © 14
R515/516/518/519 Crib Assembly Sheet
STEP 7:
a. Insert 2 Dowels (#5) into Back Top Cross Bar (O).
b. Loosen Changer Right Side Panel (J) before attaching Black Top Cross Bar to Rear Right Leg (E) and
Changer Right Side Panel by using 2 Bolts (#2)
c. Attach Mattress Support (X) flat side up by swinging out the four hangers at the corners of the mattress
support and use 4 Bolts (#4) to attach hangers to the brackets on the legs at an even level on all sides.
d. Please ensure that all the height adjustment holes are filled with appropriate bolts after the mattress
support has been moved to the desired level. Make sure that these bolts are tightly secured.

2021 AFG Baby Furniture R515/516/518/519 Assembly Sheet © 15
R515/516/518/519 Crib Assembly Sheet
STEP 8:
Attach Footboard (H) to Front Left Leg (C) on the Left Side Panel (A) and Right Side Panel (D) on the
changer unit by inserting 4 Security Barrel Nuts (#10) from the underside of all four corners of the
Footboard and securing with 4 Bolts (#12). Tighten firmly with the Wrench (#6).
STEP 9:
a. Insert 4 Dowels (#5) into Cross Bars (I).
b. Loosen 2 Bolts (#2) on top side of Rear Left Leg (B) from Headboard (G) and Front Left Leg (C) from
Footboard (H) before placing Cross Bars onto Headboard and Footboard and securing with 4 Bolts
(#11).

2021 AFG Baby Furniture R515/516/518/519 Assembly Sheet © 16
R515/516/518/515 Crib Assembly Sheet
STEP 10:
Slide the drawers into the changer unit.
CRIB AND CHANGER ASSEMBLY COMPLETE
WARNING : Tighten all bolts and check height of Mattress Support Frame, make sure frame is
at the same height at all 4 corners.

2021 AFG Baby Furniture R515/516/518/519 Assembly Sheet © 17
R515/516/518/519 Toddler Bed Assembly Sheet
*Mattress Support Assembly must be in the lowest position before installing
guardrail
a. Remove change drawers.
b. Detach the front side bolts; disassemble the Footboard (H)
c. Remove 12 Bolts (#4), leaving the Bolts that secure the Mattress Support (X)
d. Attach Guardrail to front leg brackets with 4 Bolts (#3)

2021 AFG Baby Furniture R515/516/518/519 Assembly Sheet © 18
R515/516/518/519 Full Size Bed Assembly Sheet
(Full size Bed Rails are not included)
STEP 1:
Detach Cross Bar (I) and Footboard (H) from the crib by unscrewing 2 Bolts (#11) and 4 Bolts (#12)
STEP 2:
Detach Cross Bar (I) and Footboard (H) from the crib by unscrewing 2 Bolts (#11) and 4 Bolts (#12)

2021 AFG Baby Furniture R515/516/518/519 Assembly Sheet © 19
R515/516/518/519 Full Size Bed Assembly Sheet
Step 3:
a. Detach the Back Top Cross Bar (O) from Rear Right Leg (E) and Changer Right Side Panel (J)
by unscrewing 2 Bolts (#2).
b. Detach changer unit from Headboard (G) and Cross Bar (I) by unscrewing 1 Bolt (#11) and 2 Bolts
(#12).
STEP 4:
Detach Right Side Panel (D) from the changer unit by unscrewing 6 Bolts (#2).

2021 AFG Baby Furniture R515/516/518/519 Assembly Sheet © 20
R515/516/518/519 Full Size Bed Assembly Sheet
STEP 5:
Detach Rear Right Leg (E) from Right Side Panel (D) by unscrewing 2 Bolts (#1).
STEP 6:
Attach Changer Rear Left Leg (E1) to Right Side Panel (D) by using 2 Bolts (#1). Tighten firmly with
the Wrench (#6).
This manual suits for next models
3
Table of contents
Other AFG Baby & Toddler Furniture manuals