Chimera 1650 User manual

®
#1650 INSTRUCTIONS
Litepanels 1x1
Bowens Limelite Mosaic Panel
Our full on-line catalog may be viewed at:
www.chimeralighting.com
Email questions to: [email protected]
1812 Valtec Lane, Boulder, CO 80301 USA
303-444-8000 888-444-1812
WARRANTY
At CHIMERA, we stand behind our Lightbanks, Speed Rings, and
light control accessories with a limited 5-year warranty against
defects in materials, workmanship, and color stability. If our
products are not fully operational out of the box or if they fail to
perform within ve years from the date of purchase, return it for
repair or replacement. Of course, CHIMERA’s warranty cannot
cover damage caused by accidents, improper care or use, or the
natural deterioration of materials over an extended period of time.
Front Lens ScreensTM
The new Chimera front Lens ScreenTM blends the LEDs into one
pleasing light source with a minimum loss of light output.
Model Description ID Tab Light Loss Coverage - Feet
Color in F-stops @ 5 feet
#LS30 Standard Lens Screen Red .9 5.75 x 5.75
Optional Front Lens Screens:
#LS05 Light Diffusion Black .1 5 x 5
#LS33 Wide Coverage Green .7 5.75 x 6.5
Dimensions
Front Lens Screen: 14.75” x 14.75”
Depth: 7”
Weight: 1 Lb. complete kit
Replacement poles #4016 (each)
Optional Storage Bag #4550
®
P/N 16509800

Thank you for purchasing your Chimera LED Lightbank for 1x1
LED Panel lights. Using our unique Lightbank will enhance the
quality and versatility of your LED light. Chimera’s commitment
to produce professional, dependable and versatile products for
the lighting industry has not changed since 1980.
Contents
• Lightbank with poles attached.
• Standard #LS30 Front Lens ScreenTM.
• Securtity Tab VelcroTM button.
• Speed Ring Frame.
Assembly
1. The poles are already attached to the Lightbank body so
your Lightbank is ready to be mounted into your Speed Ring
Frame. Start by opening the relief corner VelcroTM tab on
the Lightbank.
2. Position the Lightbank with the Chimera Logo to match a
notched side of the Speed Ring Frame. Insert all poles into
the Speed Ring Frame at the proper angle leaving the
relief corner pole last. Close the relief corner VelcroTM tab.
3. The Speed Ring Frame cutouts t at the top and bottom of
your light. Slide the Speed Ring Frame into the channels on
your Lightpanels 1x1 Light.
4. The top Security Tab prevents the Lightbank from sliding
off when carried upside down. Afx the supplied VelcroTM
button to your light to align with the Security Tab.
5. Mount the Standard Front Lens ScreenTM to the Lightbank
with the VelcroTM edges.
6. To disassemble, remove the Front Lens ScreenTM. While
maintaining the angle of the pole, remove the poles
from the frame carefully. Leave the poles in the Lightbank.
Always make sure that your Lightbank is clean and
completely dry before storing.
7. Carefully store your Front Lens ScreenTM at in any secure
storage case. Clean your Front Screen with rubbing alcohol
and a soft ber-free cloth as needed.
Poles are securely attached to the
Lightbank body. (1)
Corner Relief Tab
VelcroTM opening. (1)
Mounting poles to Speed Ring Frame:
We suggest that you mount the
Lightbank to the frame prior to
attaching to the light. (2)
Place VelcroTM adhesive tab mounts
on light under the security tab. (4)
Lastly, mount the Front Lens ScreenTM.
Match cutouts on the Speed
Ring Frame to the tabs on
the light to mount your LED
Lightbank. (3)