6- Qerdirg hstldirls
Connect the adapter with the unit to turn on it. The time displaying on the LED
screen is random time during the first use of the unit. The figure on the right
side is the room temperafure. There are 2 degree difference between the
oisday,ryg temperature and the acttd ternperafure.
6.1 Tme Settings
Fig.3
Alarm Micro,
6-2 Alarm S€ftings
Press ?LARM-to set alam. press .AL{l{\f key qe tine, ttre HOUR figure
begins to flash, press"up, / .down. to adjust the HOUR; press ?tARM.again,
the "MlNUTES"figure begins to flash, press . Up"l " DOWN,.to adjust the
MINUTE. To exit alarm setting, press ,.ALARM,,Io confirm your setting.(Or no
operation on any keys in lSseconds, it exits alarm setting automatically).After
finishing alarm setting,press DowN one time to turn on ararm function, the circre
dot lights up.When alarm is on,it can last for smin,press any key on
TIME/ALARM/UP/DOWN to stop the atarm. (See fig.3)
6.3 NFC Function
NFC Connection [ay: put the mbr,e or netbook vhich with NFC function on the bluetooth
speaker::d:crion area,it ca open its NFC automatically, just only need about
ls:: ; ::::::: r:rll -: duto connect.djeacv and fast,no nced anr other operations.
6.4 Bluetoo$ Fmctbn
PM
Press " Up" to switch 12 and 24 hours mode. ln 12_hour mode, a single hour
figure begins to flash: ln 24-hour mode, both of the two hour flgures begin to
flash.
After confirm the hour mode, press " TlME",the HOUR figure begins to flash.
Press'UP / "DOWN" to adJust the HOUR; press ..TlME,,again, the MINUTE
figure begins to flash. press 'up? "DowN, to adjust the MINUTE. To exit time
setting. press - TIME" to confim your setting.(Or no operation on arry keys in 1 5
se@nds, it exits time setting automaticalty)
