1 LCD dispIay
2 POwer switch button
3 Dataˉhold button∶ press this button,hoId the current
VaIue on dispIay
4 Peak-hold button∶ press this button,enter peak hoId
mode
5 Un"sW"ch button∶ press this button,sVVitCh between
LUX and FC unit
6 Range select button∶ 2000LuX、 2,000LuX、
20,000LuX、 200,000Lux∶ or2o00FC、
2000FC、 2,000FC、 20,000FC
7 Photo detector probe
IⅤ oPERATIoN INsTRUCTIONs
1 Insert battery,and turn on meter
2Press the range select button until desired range
3Remove the ρ
hoto deteCtor caρ and face itto light
so urce
4Read the test Value from the LCD display
51fthe instrument onIy dispIay one“ 1” , it meansthe
range used is overflow and shouId change to丨 arger
range
⒍
桄括岩胛泔
f跽Jf:∶∶
1HPE合%葬尼
早
昂港
·
叩
”
and the valueislocked on the LCD Press the
button“ DH”again,eXit HOld mode
⒎
箔s%瞿,T劣:1昌面
I槛:黯 搜f黹:军酤
is sens"iVe for Ⅱ
ght puIse signalIargerthan100ms
and wⅡ l display max lightintens"y "updates and
display new value onIy when a larger"ght puIse or
"ghtintens"y appear Press“ Peak” button again to
eXit peak hold mode
8After using the insturment,coVer ρ
hoto deteCtor
w"h cap an-turn o矸 power
-3-
V BATTERY CHECKˉ UP&REPLACE~IENT
⒈whenleftcomerof LCD display show“ E彐 ”
,a
battery replacementis required
2Afterturning off meter,unscrew and open battery
coverto reρ Iace a neW9V battery
3CIOse battery cover and tighten the screW
ⅤI sPECTRAL sENsITIVITY
CHARACTERIsTIC
Spectral SensⅡ iVity
/\-V(X)
·
/
丿\
廴
VVavelength
ⅥI△IAINTENANCE
1 DO not use or store the instrumentin eXtrem high
temperature or humid"y environment
2Keeρ photo detector clean during usage
3The reference leveI,as marker on the faCe ρ
late,is
the top of photo detector gIObe
4ACCording to operational condⅡ ions and time,the
sens"ivity of meter decreases ln orderto maintain
the accuracy ofthe instrument,periodic Ca"bration
Is reconη mended
⌒
硬ι>〓
>〓
一凹cΦ
∞ο>Ξ“
一ο
匹
tl
丶Ⅰ :1Ⅰ
砂